From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Injected-Via-Gmane: http://gmane.org/ To: community@lists.altlinux.org From: Andrei Lomov Date: Sat, 09 Sep 2006 11:06:11 +0700 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8Bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: gw-pervaja-milja.ll-nsk.zsttk.ru Mail-Copies-To: a.lomov@mail.ru User-Agent: KNode/0.8.2 Sender: news Subject: [Comm] eth0, eth1, eth2 X-BeenThere: community@lists.altlinux.org X-Mailman-Version: 2.1.7 Precedence: list Reply-To: lhome@academ.org, ALT Linux Community List-Id: ALT Linux Community List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 09 Sep 2006 04:06:50 -0000 Archived-At: List-Archive: List-Post: Подскажите, пожалуйста, как проблему побороть. Есть машина, включенная в сеть по eth1, на ней еще две карты eth0, eth2, по которым подключены две машины из локалки: [andrei@main andrei]$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:05:5D:81:2D:65 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:202599 errors:0 dropped:0 overruns:0 frame:0 TX packets:251181 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23403936 (22.3 Mb) TX bytes:135303304 (129.0 Mb) Interrupt:10 Base address:0xc000 eth1 Link encap:Ethernet HWaddr 00:05:5D:81:2D:66 inet addr:172.22.60.13 Bcast:172.22.60.127 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3128 errors:0 dropped:0 overruns:0 frame:0 TX packets:19101 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3021687 (2.8 Mb) TX bytes:939141 (917.1 Kb) Interrupt:11 Base address:0xc400 eth2 Link encap:Ethernet HWaddr 00:11:95:F5:2B:69 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:845 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:83557 (81.5 Kb) TX bytes:630 (630.0 b) Interrupt:5 Base address:0xc800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1104 errors:0 dropped:0 overruns:0 frame:0 TX packets:1104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:123651 (120.7 Kb) TX bytes:123651 (120.7 Kb) Подключаю машину кабелем к eth0, все работает. Тот же кабель перебрасываю на eth2 -- нет пинга. Лампочка на eth2 моргает. Что-то не пойму, в чем может быть проблема... В messages вроде все нормально ?: ... eth0: VIA VT6105 Rhine-III at 0xc000, 00:05:5d:81:2d:65, IRQ 10. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. eth1: VIA VT6105 Rhine-III at 0xc400, 00:05:5d:81:2d:66, IRQ 11. eth1: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1. eth2: VIA VT6105 Rhine-III at 0xc800, 00:11:95:f5:2b:69, IRQ 5. eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. eth1: Setting full-duplex based on MII #1 link partner capability of 41e1. ... eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. eth0: Setting half-duplex based on MII #1 link partner capability of 0000. eth2: Setting full-duplex based on MII #1 link partner capability of 45e1. eth2: Setting half-duplex based on MII #1 link partner capability of 0000. eth2: Setting full-duplex based on MII #1 link partner capability of 45e1. eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. eth2: Setting half-duplex based on MII #1 link partner capability of 0000. ... -- Всего доброго, А.Л.