* [Comm] Не могу настроить драйвер видеокарты..
@ 2006-08-13 15:49 Коржевин Дмитрий Константинович
2006-08-13 17:54 ` Olvin
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Коржевин Дмитрий Константинович @ 2006-08-13 15:49 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 1181 bytes --]
Помогите пожалуйста настроить драйвер видеокарты ATI Radeon 7000.
После переустановки никак не получается загрузится в графический режим с
родным драйвером.
Если выбираю: Generic VESA compatible, то могу зайти в систему в
графическом режиме. Если выбираю родной драйвер ATI Radoen 7000, то при
загрузке монитор уходит в спящий режим и не выходит из него.
К слову - при установке системы я не нашел драйвера к монитору. Может
быть вы поможете найти решение этой проблемы?
Видеокарта: ATI Radeon 7000
Монитор: Samsung Sync Master 551s (15-ть дюймов)
Система: ASP Linux 11 Express
Вкладываю логи и конфиги X11 при которых не загружается система.
Быть может, кто-то уже сталкивался с этой проблемой..
[-- Attachment #2: xorg.conf --]
[-- Type: text/plain, Size: 2294 bytes --]
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
# Load "pex5"
Load "record"
# Load "xie"
Load "v4l"
Load "type1"
Load "dri"
EndSection
Section "ServerFlags"
Option "allowmouseopenfail"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "Protocol" "Standard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "on"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
#800x600 @ 85.0 Hz, 55.8 kHz hsync
#Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
#640x480 @ 85.0 Hz, 43.3 kHz hsync
#Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
Identifier "Monitor"
VendorName "SAM"
ModelName "Samsung SyncMaster 550(M)s"
HorizSync 30.0 - 61.0
VertRefresh 50.0 - 120.0
EndSection
Section "Device"
# Option "NoAccel"
Identifier "Generic VESA compatible"
Driver "radeon"
BoardName "ATI Radeon 7000"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Generic VESA compatible"
Monitor "Monitor"
DefaultDepth 24
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[-- Attachment #3: xorg.conf.backup --]
[-- Type: text/plain, Size: 2854 bytes --]
# buildxconf *** delete this line to prevent buildxconf from modifying this file
#
# XF86Config auto-generated by buildxconf
#
# Copyright (c) 1999, Corel Corporation
# Robin Burgener, robinb@corel.com
#
# See 'man XF86Config' for info on the format of this file
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "fbdevhw"
Load "glx"
# Load "pex5"
Load "record"
# Load "xie"
Load "v4l"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "Protocol" "Standard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "on"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "ServerFlags"
AllowMouseOpenFail
EndSection
Section "Monitor"
Identifier "Monitor"
VendorName "SAM"
ModelName "Samsung SyncMaster 550(M)s"
HorizSync 30-61
VertRefresh 50-120
#800x600 @ 85.0 Hz, 55.8 kHz hsync
#Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
#640x480 @ 85.0 Hz, 43.3 kHz hsync
#Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
EndSection
Section "Monitor"
#!Description "Super VGA 1024x768 @ 60Hz"
Identifier "Super VGA"
ModelName "Super VGA"
HorizSync 31.5-48.5
VertRefresh 50-90
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
EndSection
Section "Device"
Driver "vesa"
Identifier "Generic VESA compatible"
BoardName "Generic VESA compatible"
# Option "NoAccel"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Generic VESA compatible"
Monitor "Monitor"
DefaultColorDepth 24
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[-- Attachment #4: xorg.conf --]
[-- Type: text/plain, Size: 2828 bytes --]
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "SyncMaster"
DisplaySize 280 210
HorizSync 30.0 - 55.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Radeon 7000"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
[-- Attachment #5: xorg.conf.backup --]
[-- Type: text/plain, Size: 2259 bytes --]
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
# Load "pex5"
Load "record"
# Load "xie"
Load "v4l"
Load "type1"
Load "dri"
EndSection
Section "ServerFlags"
Option "allowmouseopenfail"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "Protocol" "Standard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "on"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
#800x600 @ 85.0 Hz, 55.8 kHz hsync
#Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
#640x480 @ 85.0 Hz, 43.3 kHz hsync
#Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
Identifier "Monitor"
VendorName "SAM"
ModelName "Samsung SyncMaster 550(M)s"
HorizSync 30.0 - 61.0
VertRefresh 50.0 - 120.0
EndSection
Section "Device"
Identifier "ATI Radeon 7000"
Driver "radeon"
BoardName "ATI Radeon 7000"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Generic VESA compatible"
Monitor "Monitor"
DefaultDepth 24
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Не могу настроить драйвер видеокарты...
2006-08-13 15:49 [Comm] Не могу настроить драйвер видеокарты Коржевин Дмитрий Константинович
@ 2006-08-13 17:54 ` Olvin
2006-08-13 18:34 ` Алексей Синицын
2006-08-14 6:53 ` Michael Shigorin
2 siblings, 0 replies; 4+ messages in thread
From: Olvin @ 2006-08-13 17:54 UTC (permalink / raw)
To: knc, ALT Linux Community
Коржевин Дмитрий Константинович wrote:
> Видеокарта: ATI Radeon 7000
> Монитор: Samsung Sync Master 551s (15-ть дюймов)
> Система: ASP Linux 11 Express
Вы рассылкой ошиблись. Здесь обсуждают _ALT_ Linux.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Не могу настроить драйвер видеокарты..
2006-08-13 15:49 [Comm] Не могу настроить драйвер видеокарты Коржевин Дмитрий Константинович
2006-08-13 17:54 ` Olvin
@ 2006-08-13 18:34 ` Алексей Синицын
2006-08-14 6:53 ` Michael Shigorin
2 siblings, 0 replies; 4+ messages in thread
From: Алексей Синицын @ 2006-08-13 18:34 UTC (permalink / raw)
To: knc, ALT Linux Community
2006/8/13, Коржевин Дмитрий Константинович <knc@voliacable.com>:
> Помогите пожалуйста настроить драйвер видеокарты ATI Radeon 7000.
> После переустановки никак не получается загрузится в графический режим с
> родным драйвером.
> Если выбираю: Generic VESA compatible, то могу зайти в систему в
> графическом режиме. Если выбираю родной драйвер ATI Radoen 7000, то при
> загрузке монитор уходит в спящий режим и не выходит из него.
> К слову - при установке системы я не нашел драйвера к монитору. Может
>
К монитору не нужны драйверы.
Скорее всего нужно указать значения HorizSync и VertRefresh в файле
/etc/X11/xorg.conf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Не могу настроить драйвер видеокарты..
2006-08-13 15:49 [Comm] Не могу настроить драйвер видеокарты Коржевин Дмитрий Константинович
2006-08-13 17:54 ` Olvin
2006-08-13 18:34 ` Алексей Синицын
@ 2006-08-14 6:53 ` Michael Shigorin
2 siblings, 0 replies; 4+ messages in thread
From: Michael Shigorin @ 2006-08-14 6:53 UTC (permalink / raw)
To: ALT Linux Community
On Sun, Aug 13, 2006 at 06:49:58PM +0300, Коржевин Дмитрий Константинович wrote:
> Помогите пожалуйста настроить драйвер видеокарты ATI Radeon 7000.
> Section "Device"
>
> # Option "NoAccel"
> Identifier "Generic VESA compatible"
> Driver "radeon"
> BoardName "ATI Radeon 7000"
> EndSection
Можете попробовать "ati" вместо "radeon". Вообще конфиг какой-то
странно-замороченный, можете попробовать глянуть мой:
http://paq.osdn.org.ua/~mike/tmp/xorg.conf
> Система: ASP Linux 11 Express
http://community.asplinux.ru; можете взять Compact 3.0.4 на
ftp://ftp.linux.kiev.ua/pub/Linux/ALT/ISO и уж по нему welcome
спрашивать здесь :-)
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-08-14 6:53 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-08-13 15:49 [Comm] Не могу настроить драйвер видеокарты Коржевин Дмитрий Константинович
2006-08-13 17:54 ` Olvin
2006-08-13 18:34 ` Алексей Синицын
2006-08-14 6:53 ` Michael Shigorin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git