Adaptec AIC7xxx driver version: 5.1.33/3.2.4
Compile Options:
  TCQ Enabled By Default : Disabled
  AIC7XXX_PROC_STATS     : Enabled
  AIC7XXX_RESET_DELAY    : 5

Adapter Configuration:
           SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
                           Ultra Wide Controller at PCI 0/11/0
    PCI MMAPed I/O Base: 0xe1000000
 Adapter SEEPROM Config: SEEPROM found and used.
      Adaptec SCSI BIOS: Enabled
                    IRQ: 10
                   SCBs: Active 1, Max Active 1,
                         Allocated 15, HW 16, Page 255
             Interrupts: 62983
      BIOS Control Word: 0x1086
   Adapter Control Word: 0x005a
   Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
     Ultra Enable Flags: 0x0001
 Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
    Tagged Queue By Device array for aic7xxx host instance 0:
      {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
    Actual queue depth per device for aic7xxx host instance 0:
      {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}

Statistics:

(scsi0:0:0:0)
  Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
  Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
  Total transfers 62914 (50583 reads and 12331 writes)
             < 2K      2K+     4K+     8K+    16K+    32K+    64K+   128K+
   Reads:    4190      13   30402    5967    5660    2458    1893       0
  Writes:     349     112    8330    2101     484     253     702       0


(scsi0:0:4:0)
  Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15
  Transinfo settings: current(25/15/0/0), goal(12/15/0/0), user(12/15/1/0)
  Total transfers 0 (0 reads and 0 writes)
             < 2K      2K+     4K+     8K+    16K+    32K+    64K+   128K+
   Reads:       0       0       0       0       0       0       0       0
  Writes:       0       0       0       0       0       0       0       0