From: Konstantin.Sinitsyn@rsce.ru To: mandrake-russian@linuxteam.iplabs.ru Subject: Ha: Re: Ha: Re: [mdk-re] Сеть? Date: Wed Jan 31 14:39:00 2001 Message-ID: <OF66164E0C.3B5C2676-ONC32569E5.003E75F2@rsce.ru> (raw) > Присутствуют. > А что в них написано? Должно быть типа: DEVICE="eth0" BOOTPROTO="none" IPADDR="192.168.0.2" NETMASK="255.255.255.0" NETWORK=192.168.0.1 BROADCAST=192.168.0.255 ONBOOT="yes" > 1)Этот вопрос был раньше в рассылке, но не могу найти на него ответ. > Сеть не работает. Делаю ifconfig лю-лю всё работает перезагружаюсь > начинаем всё с начала. Не напомните? > В /etc/sysconfig/network прописал и true и yes, > зато файл /etc/networks 0 байт. Что надо там прописать. > Через linuxconf ноль эмоций. А что не работает? Интерфейсы при загрузке не поднимаются? Тогда - проверить скрипты ifcfg-eth.. в /etc/sysconfig/networkscripts. Если скрипты есть и с ним все нормально, то проверить грузятся ли модули сетевых карточек. > начинаем всё с начала. Не напомните? > В /etc/sysconfig/network прописал и true и yes, > зато файл /etc/networks 0 байт. Что надо там прописать. > Через linuxconf ноль эмоций. а что говорит /sbin/chkconfig --list network ? Вообще-то скрипты есть всё как написано, но действительно похоже модуль сетевой карты не грузится при загрузке, хотя в modules.conf прописано alias eth0 3c59x. а команда chkconfig --list network говорит что 0:откл. 1:откл. и.т.д. Как сделать чтобы модуль грузился автоматически? ifconfig поднимает интерфейс, но после перезагрузки надо снова его поднимать. Синицын К.
next reply other threads:[~2001-01-31 14:39 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2001-01-31 14:39 Konstantin.Sinitsyn [this message] 2001-01-31 16:04 ` Ha: Re: Ha: Re: [mdk-re] óÅÔØ? Aleksandr Blohin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=OF66164E0C.3B5C2676-ONC32569E5.003E75F2@rsce.ru \ --to=konstantin.sinitsyn@rsce.ru \ --cc=mandrake-russian@linuxteam.iplabs.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git