From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Boris Muradov To: community@lists.altlinux.org Mime-Version: 1.0 X-Mailer: mPOP Web-Mail 2.19 X-Originating-IP: [85.140.110.62] Date: Sun, 04 Nov 2007 20:47:00 +0300 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Message-Id: Subject: [Comm] =?koi8-r?b?IG1hZHdpZmkrd3BhX3N1cHBsaWNhbnQ=?= X-BeenThere: community@lists.altlinux.org X-Mailman-Version: 2.1.9 Precedence: list Reply-To: Boris Muradov , ALT Linux Community general discussions List-Id: ALT Linux Community general discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 04 Nov 2007 17:47:04 -0000 Archived-At: List-Archive: List-Post: úÄÒÁ×ÓÔ×ÕÊÔÅ, óompact 3.0. 802.11 chipset Atheros. ÐÒÏÂÕÀ ÐÏÄËÌÀÞÉÔØÓÑ Ë wifi ÔÏÞËÅ ÄÏÓÔÕÐÁ ÞÅÒÅÚ WPA-PKS (ÞÅÒÅÚ WEP ×ÓÅ ÏË). ÄÌÑ ÐÏÄÄÅÒÖËÉ WPA ÎÁ ÞÉÐÓÅÔÅ Atheros ÏÂÎÏ×ÌÅÎÙ: kernel-modules-madwifi-std-smp-0.9.14.9 wpa_supplicant-0.5.8-alt1 ÑÄÒÏ ÞÉÐÓÅÔ ×ÒÏÄÅ ÒÁÓÐÏÚÎÁÌÏ: ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) ath_rate_onoe: 1.0 ath_pci: 0.9.4.12 (EXPERIMENTAL) ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.9 phy 4.3 radio 3.6 ath0: 802.11 address: 00:0e:9b:c6:90:8f ath0: Use hw queue 0 for WME_AC_BE traffic ath0: Use hw queue 1 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Atheros 5212: mem=0xd0200000, irq=21 ÔÏÞËÁ ÄÏÓÔÕÐÁ ×ÉÄÎÁ (iwlist ath0 scan): Cell 05 - Address: 00:60:B3:D8:17:6C ESSID:"ADSL_Wireless" Mode:Master Frequency:2.437 GHz (Channel 6) Quality=30/94 Signal level=-65 dBm Noise level=-95 dBm Encryption key:on Bit Rate:1 Mb/s Bit Rate:2 Mb/s Bit Rate:5 Mb/s Bit Rate:6 Mb/s Bit Rate:9 Mb/s Bit Rate:11 Mb/s Bit Rate:12 Mb/s Bit Rate:18 Mb/s Bit Rate:22 Mb/s Bit Rate:24 Mb/s Bit Rate:36 Mb/s Bit Rate:48 Mb/s Bit Rate:54 Mb/s Extra:bcn_int=200 Extra:wpa_ie=dd160050f20101000050f20201000050f20201000050f202 /etc/wpa_supplicant.conf - ÐÒÏÝÅ ÎÅËÕÄÁ network={ ssid="ADSL_Wireless" key_mgmt=WPA-PSK proto=WPA pairwise=TKIP group=TKIP psk=7a31cd1c5479c395a83f2916711735e2fda0773dd09ced939e7c0a8f07ec2229 } ÎÁ ÄÁÌØÛÅ ÎÉÞÅÇÏ ÎÅ ÐÏÌÕÞÉÌÏÓØ, ÐÏÍÏÇÉÔÅ, pls, ÒÁÚÏÂÒÁÔØÓÑ, ÐÒÏÛÕ ÉÚ×ÉÎÉÔØ ÚÁ ÄÌÉÎÎÙÊ ÌÉÓÔÉÎÇ. wpa_supplicant -iath0 -Dmadwifi -c /etc/wpa_supplicant.conf ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[IEEE80211_IOCTL_DELKEY]: Operation not supported ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[IEEE80211_IOCTL_SETMLME]: Operation not supported ioctl[IEEE80211_IOCTL_SETMLME]: Operation not supported ioctl[IEEE80211_IOCTL_SETMLME]: Operation not supported Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'madwifi' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Line: 1 - start of a new network block ssid - hexdump_ascii(len=13): 41 44 53 4c 5f 57 69 72 65 6c 65 73 73 ADSL_Wireless key_mgmt: 0x2 proto: 0x1 pairwise: 0x8 group: 0x8 PSK - hexdump(len=32): 7a 31 cd 1c 54 79 c3 95 a8 3f 29 16 71 17 35 e2 fd a0 77 3d d0 9c ed 93 9e 7c 0a 8f 07 ec 22 29 Priority group 0 id=0 ssid='ADSL_Wireless' Initializing interface (2) 'ath0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: too old (short) data - assuming WPA is not supported WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:0e:9b:c6:90:8f wpa_driver_madwifi_del_key: keyidx=0 wpa_driver_madwifi_del_key: keyidx=1 wpa_driver_madwifi_del_key: keyidx=2 wpa_driver_madwifi_del_key: keyidx=3 wpa_driver_madwifi_set_countermeasures: enabled=0 wpa_driver_madwifi_set_drop_unencrypted: enabled=1 Setting scan request: 0 sec 100000 usec Added interface ath0 RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 Added BSSID 00:00:00:00:00:00 into blacklist CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys wpa_driver_madwifi_del_key: keyidx=0 wpa_driver_madwifi_del_key: keyidx=1 wpa_driver_madwifi_del_key: keyidx=2 wpa_driver_madwifi_del_key: keyidx=3 wpa_driver_madwifi_del_key: keyidx=0 State: DISCONNECTED -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Scan results: -1 Failed to get scan results Failed to get scan results - try scanning again Setting scan request: 0 sec 0 usec Starting AP scan (broadcast SSID) RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) Wireless event: cmd=0x8b1a len=12 RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) Wireless event: cmd=0x8b19 len=12 Received 1340 bytes of scan results (7 BSSes) Scan results: 7 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:60:b3:d8:17:6c ssid='ADSL_Wireless' wpa_ie_len=24 rsn_ie_len=0 caps=0x11 selected based on WPA IE selected WPA AP 00:60:b3:d8:17:6c ssid='ADSL_Wireless' Try to find non-WPA AP Trying to associate with 00:60:b3:d8:17:6c (SSID='ADSL_Wireless' freq=2437 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: using IEEE 802.11i/D3.0 WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 WPA: clearing AP RSN IE WPA: using GTK TKIP WPA: using PTK TKIP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 No keys have been configured - skip key clearing wpa_driver_madwifi_set_drop_unencrypted: enabled=1 State: SCANNING -> ASSOCIATING wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_madwifi_associate wpa_driver_madwifi_associate: SETMLME[ASSOC] failed Association request to the driver failed Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) Wireless event: cmd=0x8b1a len=26 Authentication with 00:00:00:00:00:00 timed out. Added BSSID 00:60:b3:d8:17:6c into blacklist No keys have been configured - skip key clearing State: ASSOCIATING -> DISCONNECTED