* [Comm] nepravil'naya kodirovka v terminale in Master 2.2
@ 2003-06-10 2:41 Yuriy
2003-06-10 7:32 ` Alexej Kryukov
0 siblings, 1 reply; 6+ messages in thread
From: Yuriy @ 2003-06-10 2:41 UTC (permalink / raw)
To: community
Здравствуйте.
Только установил Мастера 2.2
При установке ставил локаль кои8-р.
всё бы хорошо, но в терминале нельзя:
а) прочесть в терминале и программах в нём запускаемых сообщения
на русском (одни крякозяблики, кроме того даже в mc нельзя
прочесть русские кои8-р файлы которые раньше читались без проблемм)
б) написать на русском (пишутся крякозяблики).
В других програмах с руским всё Ок (я имею в виду "нетерминальные")
Вот вывод команды locale:
***
LANG=ru_RU.KOI8-R
LC_CTYPE="ru_RU.KOI8-R"
LC_NUMERIC="ru_RU.KOI8-R"
LC_TIME="ru_RU.KOI8-R"
LC_COLLATE="ru_RU.KOI8-R"
LC_MONETARY="ru_RU.KOI8-R"
LC_MESSAGES="ru_RU.KOI8-R"
LC_PAPER="ru_RU.KOI8-R"
LC_NAME="ru_RU.KOI8-R"
LC_ADDRESS="ru_RU.KOI8-R"
LC_TELEPHONE="ru_RU.KOI8-R"
LC_MEASUREMENT="ru_RU.KOI8-R"
LC_IDENTIFICATION="ru_RU.KOI8-R"
LC_ALL=
****(последняя строка почему то незаконченная. Может здесь проблемы?)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] nepravil'naya kodirovka v terminale in Master 2.2
2003-06-10 2:41 [Comm] nepravil'naya kodirovka v terminale in Master 2.2 Yuriy
@ 2003-06-10 7:32 ` Alexej Kryukov
2003-06-11 1:45 ` Yuriy
0 siblings, 1 reply; 6+ messages in thread
From: Alexej Kryukov @ 2003-06-10 7:32 UTC (permalink / raw)
To: community
On Tuesday 10 June 2003 06:41, Yuriy wrote:
> Здравствуйте.
>
> Только установил Мастера 2.2
>
> При установке ставил локаль кои8-р.
>
> всё бы хорошо, но в терминале нельзя:
> а) прочесть в терминале и программах в нём запускаемых сообщения
> на русском (одни крякозяблики, кроме того даже в mc нельзя
> прочесть русские кои8-р файлы которые раньше читались без проблемм)
> б) написать на русском (пишутся крякозяблики).
>
> В других програмах с руским всё Ок (я имею в виду "нетерминальные")
Вопрос задан неконкретно.
Во-первых, что такое "кракозябрики": бНОПНЯ или латиница?
Во-вторых, какой именно терминал используете (речь, как
я понимаю, идет о запуске приложений в терминале под
иксами)?
Если неправильная кодировка наблюдается только в терминале,
но не в "чистой" консоли, то наверняка просто нужно поменять
шрифт для данного конкретного терминала.
> Вот вывод команды locale:
> ***
> LANG=ru_RU.KOI8-R
> LC_CTYPE="ru_RU.KOI8-R"
> LC_NUMERIC="ru_RU.KOI8-R"
> LC_TIME="ru_RU.KOI8-R"
> LC_COLLATE="ru_RU.KOI8-R"
> LC_MONETARY="ru_RU.KOI8-R"
> LC_MESSAGES="ru_RU.KOI8-R"
> LC_PAPER="ru_RU.KOI8-R"
> LC_NAME="ru_RU.KOI8-R"
> LC_ADDRESS="ru_RU.KOI8-R"
> LC_TELEPHONE="ru_RU.KOI8-R"
> LC_MEASUREMENT="ru_RU.KOI8-R"
> LC_IDENTIFICATION="ru_RU.KOI8-R"
> LC_ALL=
>
> ****(последняя строка почему то незаконченная. Может здесь проблемы?)
Нет, такая и должна быть. Устанавливать LC_ALL во что бы то ни было
не есть хорошо.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] nepravil'naya kodirovka v terminale in Master 2.2
2003-06-10 7:32 ` Alexej Kryukov
@ 2003-06-11 1:45 ` Yuriy
2003-06-11 14:03 ` Alexej Kryukov
0 siblings, 1 reply; 6+ messages in thread
From: Yuriy @ 2003-06-11 1:45 UTC (permalink / raw)
To: community
Alexej Kryukov пишет:
> On Tuesday 10 June 2003 06:41, Yuriy wrote:
>
>>Здравствуйте.
>>
>>Только установил Мастера 2.2
>>
>>При установке ставил локаль кои8-р.
>>
>>всё бы хорошо, но в терминале нельзя:
>>а) прочесть в терминале и программах в нём запускаемых сообщения
>>на русском (одни крякозяблики, кроме того даже в mc нельзя
>>прочесть русские кои8-р файлы которые раньше читались без проблемм)
>>б) написать на русском (пишутся крякозяблики).
>>
>>В других програмах с руским всё Ок (я имею в виду "нетерминальные")
>
>
> Вопрос задан неконкретно.
>
> Во-первых, что такое "кракозябрики": бНОПНЯ или латиница?
Не латиница, но и не бНОПНЯ: куча букв с ударениями и
двоеточиями над ними.
> Во-вторых, какой именно терминал используете (речь, как
> я понимаю, идет о запуске приложений в терминале под
> иксами)?
Да, именно так. Причём, сподвинутый Вашими вопросами на
далльнейшие исследования понял что не в любом терминале дело
происходит:
Проблемма наблюдается в терминале, запускаемом
/usr/X11R6/bin/WindowMaker-Terminal (стандартная кнопка терминала
в WM, раньше в Юниоре я всегда с ним работал)
В другом: /usr/X11R6/bin/xterm -name XTerm
- всё нормально.
> Если неправильная кодировка наблюдается только в терминале,
> но не в "чистой" консоли, то наверняка просто нужно поменять
> шрифт для данного конкретного терминала.
Где и как это сделать для терминала
/usr/X11R6/bin/WindowMaker-Terminal ?
--
Спасибо,
Юрий
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] nepravil'naya kodirovka v terminale in Master 2.2
2003-06-11 1:45 ` Yuriy
@ 2003-06-11 14:03 ` Alexej Kryukov
2003-06-11 14:25 ` Re[2]: " KoLyA
2003-06-11 14:27 ` Slava Garelin
0 siblings, 2 replies; 6+ messages in thread
From: Alexej Kryukov @ 2003-06-11 14:03 UTC (permalink / raw)
To: community
On Wednesday 11 June 2003 05:45, Yuriy wrote:
>
> Не латиница, но и не бНОПНЯ: куча букв с ударениями и
> двоеточиями над ними.
Как у господина Журдена: ни прозы, ни стихов :) Буквы-то
с ударениями латинские? Значит, латиница.
> Проблемма наблюдается в терминале, запускаемом
> /usr/X11R6/bin/WindowMaker-Terminal (стандартная кнопка терминала
> в WM, раньше в Юниоре я всегда с ним работал)
Тогда я не знаю, какой это терминал. Может быть,
откликнется кто-то, кто использует WindowMaker, и именно
под ALT?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re[2]: [Comm] nepravil'naya kodirovka v terminale in Master 2.2
2003-06-11 14:03 ` Alexej Kryukov
@ 2003-06-11 14:25 ` KoLyA
2003-06-11 14:27 ` Slava Garelin
1 sibling, 0 replies; 6+ messages in thread
From: KoLyA @ 2003-06-11 14:25 UTC (permalink / raw)
To: community
> > Проблемма наблюдается в терминале, запускаемом
> > /usr/X11R6/bin/WindowMaker-Terminal (стандартная кнопка терминала
> > в WM, раньше в Юниоре я всегда с ним работал)
>
> Тогда я не знаю, какой это терминал. Может быть,
> откликнется кто-то, кто использует WindowMaker, и именно
> под ALT?
да это обычный xterm насколько я помню, просто вызывается с кучей параметров
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Comm] nepravil'naya kodirovka v terminale in Master 2.2
2003-06-11 14:03 ` Alexej Kryukov
2003-06-11 14:25 ` Re[2]: " KoLyA
@ 2003-06-11 14:27 ` Slava Garelin
1 sibling, 0 replies; 6+ messages in thread
From: Slava Garelin @ 2003-06-11 14:27 UTC (permalink / raw)
To: community
On Wed, 11 Jun 2003 18:03:16 +0400
Alexej Kryukov <akrioukov@kengu.ru> wrote:
> On Wednesday 11 June 2003 05:45, Yuriy wrote:
> >
> > Не латиница, но и не бНОПНЯ: куча букв с ударениями и
> > двоеточиями над ними.
>
> Как у господина Журдена: ни прозы, ни стихов :) Буквы-то
> с ударениями латинские? Значит, латиница.
>
> > Проблемма наблюдается в терминале, запускаемом
> > /usr/X11R6/bin/WindowMaker-Terminal (стандартная кнопка терминала
> > в WM, раньше в Юниоре я всегда с ним работал)
>
> Тогда я не знаю, какой это терминал. Может быть,
> откликнется кто-то, кто использует WindowMaker, и именно
> под ALT?
Если не определена WMTERMNAME, то - xvt, которая суть символьная ссылка
на aterm.
Если не ошибаюсь.
--
Slava Garelin
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-06-11 14:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-06-10 2:41 [Comm] nepravil'naya kodirovka v terminale in Master 2.2 Yuriy
2003-06-10 7:32 ` Alexej Kryukov
2003-06-11 1:45 ` Yuriy
2003-06-11 14:03 ` Alexej Kryukov
2003-06-11 14:25 ` Re[2]: " KoLyA
2003-06-11 14:27 ` Slava Garelin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git