* [Comm] /usr/lib/cups/filter/hpcups failed
@ 2012-11-07 3:20 Denis G. Samsonenko
2012-11-07 7:50 ` Michael Shigorin
2012-11-07 10:53 ` Igor Vlasenko
0 siblings, 2 replies; 5+ messages in thread
From: Denis G. Samsonenko @ 2012-11-07 3:20 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 848 bytes --]
День добрый!
Есть сетевой принтер HP LaserJet P1606dn, подключённый к локальной
сети ethernet кабелем.
Есть его настроить через Foomatic/foo2zjs-z2, то он печатает, но лист
получается смещённым по вертикали вниз на ~4 мм, что создаёт некоторые
неудобства при двусторонней печати.
Пытаюсь его подключить через hplip. Ставлю hplip 3.11.10-alt1.M60P.1,
присутствующий в используемом мной p6. Принтер определяется, печатает
правильно, но двусторонняя печать недоступна. Вообще такой настройки
нет.
Пересобрал версию hplip из t6: 3.12.9-alt1.M60T.1. С ним принтер тоже
определяется, устанавливается, в настройках двусторонняя печать, но
принтер не печатает. При попытке напечатать тестовую страницу задание
обламывается с сообщением:
/usr/lib/cups/filter/hpcups failed
Вывод hp-check -t приложил.
Система: p6, x86-64.
--
Всего доброго,
Денис.
[-- Attachment #2: hp-check.log.gz --]
[-- Type: application/x-gzip, Size: 2698 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] /usr/lib/cups/filter/hpcups failed
2012-11-07 3:20 [Comm] /usr/lib/cups/filter/hpcups failed Denis G. Samsonenko
@ 2012-11-07 7:50 ` Michael Shigorin
2012-11-07 10:03 ` Denis G. Samsonenko
2012-11-07 10:53 ` Igor Vlasenko
1 sibling, 1 reply; 5+ messages in thread
From: Michael Shigorin @ 2012-11-07 7:50 UTC (permalink / raw)
To: community; +Cc: Igor Vlasenko
On Wed, Nov 07, 2012 at 09:20:37AM +0600, Denis G. Samsonenko wrote:
> Пытаюсь его подключить через hplip. Ставлю hplip 3.11.10-alt1.M60P.1,
> присутствующий в используемом мной p6. Принтер определяется, печатает
> правильно, но двусторонняя печать недоступна. Вообще такой настройки
> нет.
>
> Пересобрал версию hplip из t6: 3.12.9-alt1.M60T.1. С ним принтер тоже
> определяется, устанавливается, в настройках двусторонняя печать, но
> принтер не печатает. При попытке напечатать тестовую страницу задание
> обламывается с сообщением:
>
> /usr/lib/cups/filter/hpcups failed
>
> Вывод hp-check -t приложил.
"warning: Printer is not HPLIP installed. Printers must use
the hp: or hpfax: CUPS backend for HP-Devices" намекает на
осмысленность "сбэкапить /etc/cups, снести этот принтер,
настроить заново как hplip".
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] /usr/lib/cups/filter/hpcups failed
2012-11-07 7:50 ` Michael Shigorin
@ 2012-11-07 10:03 ` Denis G. Samsonenko
0 siblings, 0 replies; 5+ messages in thread
From: Denis G. Samsonenko @ 2012-11-07 10:03 UTC (permalink / raw)
To: shigorin, ALT Linux Community general discussions, Igor Vlasenko
Михаил!
7 ноября 2012 г., 14:50 пользователь Michael Shigorin написал:
> "warning: Printer is not HPLIP installed. Printers must use
> the hp: or hpfax: CUPS backend for HP-Devices" намекает на
> осмысленность "сбэкапить /etc/cups, снести этот принтер,
> настроить заново как hplip".
Этот варнинг относится к варианту установки через foo2zjs, который как
раз работает. Там же есть и вариант установки через hplip, но который
не работает.
Дома у меня на другом принтере (HP LaserJet P1102w) оба варианта (и
foo2zjs, и hplip) работают, а тут нет.
--
Всего доброго,
Денис.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] /usr/lib/cups/filter/hpcups failed
2012-11-07 3:20 [Comm] /usr/lib/cups/filter/hpcups failed Denis G. Samsonenko
2012-11-07 7:50 ` Michael Shigorin
@ 2012-11-07 10:53 ` Igor Vlasenko
2012-11-08 3:12 ` Denis G. Samsonenko
1 sibling, 1 reply; 5+ messages in thread
From: Igor Vlasenko @ 2012-11-07 10:53 UTC (permalink / raw)
To: ALT Linux Community general discussions
On Wed, Nov 07, 2012 at 09:20:37AM +0600, Denis G. Samsonenko wrote:
> Пересобрал версию hplip из t6: 3.12.9-alt1.M60T.1. С ним принтер тоже
> определяется, устанавливается, в настройках двусторонняя печать, но
> принтер не печатает. При попытке напечатать тестовую страницу задание
> обламывается с сообщением:
>
> /usr/lib/cups/filter/hpcups failed
> Вывод hp-check -t приложил.
Этого недостаточно, надо посмотреть диагностику в логах,
там должна была остаться ругань от падения hpcups.
Например, перестартовать cups, запустить
su -c "hp-logcapture"
и послать пробу на печать.
или руками логи посмотреть.
--
Dr. Igor Vlasenko
--------------------
Topology Department
Institute of Math
Kiev, Ukraine
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] /usr/lib/cups/filter/hpcups failed
2012-11-07 10:53 ` Igor Vlasenko
@ 2012-11-08 3:12 ` Denis G. Samsonenko
0 siblings, 0 replies; 5+ messages in thread
From: Denis G. Samsonenko @ 2012-11-08 3:12 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 423 bytes --]
День добрый!
7 ноября 2012 г., 17:53 пользователь Igor Vlasenko написал:
> Этого недостаточно, надо посмотреть диагностику в логах,
> там должна была остаться ругань от падения hpcups.
> Например, перестартовать cups, запустить
> su -c "hp-logcapture"
hp-logcapture как-то странно отработала.
> и послать пробу на печать.
> или руками логи посмотреть.
Собрал логи руками, прилагаю к письму.
--
Всего доброго,
Денис.
[-- Attachment #2: logs.tar.gz --]
[-- Type: application/x-gzip, Size: 3331 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-11-08 3:12 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-07 3:20 [Comm] /usr/lib/cups/filter/hpcups failed Denis G. Samsonenko
2012-11-07 7:50 ` Michael Shigorin
2012-11-07 10:03 ` Denis G. Samsonenko
2012-11-07 10:53 ` Igor Vlasenko
2012-11-08 3:12 ` Denis G. Samsonenko
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git