ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] /usr/lib/cups/filter/hpcups failed
@ 2012-11-07  3:20 Denis G. Samsonenko
  2012-11-07  7:50 ` Michael Shigorin
  2012-11-07 10:53 ` Igor Vlasenko
  0 siblings, 2 replies; 5+ messages in thread
From: Denis G. Samsonenko @ 2012-11-07  3:20 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 848 bytes --]

День добрый!

Есть сетевой принтер HP LaserJet P1606dn, подключённый к локальной
сети ethernet кабелем.

Есть его настроить через Foomatic/foo2zjs-z2, то он печатает, но лист
получается смещённым по вертикали вниз на ~4 мм, что создаёт некоторые
неудобства при двусторонней печати.

Пытаюсь его подключить через hplip. Ставлю hplip 3.11.10-alt1.M60P.1,
присутствующий в используемом мной p6. Принтер определяется, печатает
правильно, но двусторонняя печать недоступна. Вообще такой настройки
нет.

Пересобрал версию hplip из t6: 3.12.9-alt1.M60T.1. С ним принтер тоже
определяется, устанавливается, в настройках двусторонняя печать, но
принтер не печатает. При попытке напечатать тестовую страницу задание
обламывается с сообщением:

/usr/lib/cups/filter/hpcups failed

Вывод hp-check -t приложил.

Система: p6, x86-64.

-- 
Всего доброго,

Денис.

[-- Attachment #2: hp-check.log.gz --]
[-- Type: application/x-gzip, Size: 2698 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Comm] /usr/lib/cups/filter/hpcups failed
  2012-11-07  3:20 [Comm] /usr/lib/cups/filter/hpcups failed Denis G. Samsonenko
@ 2012-11-07  7:50 ` Michael Shigorin
  2012-11-07 10:03   ` Denis G. Samsonenko
  2012-11-07 10:53 ` Igor Vlasenko
  1 sibling, 1 reply; 5+ messages in thread
From: Michael Shigorin @ 2012-11-07  7:50 UTC (permalink / raw)
  To: community; +Cc: Igor Vlasenko

On Wed, Nov 07, 2012 at 09:20:37AM +0600, Denis G. Samsonenko wrote:
> Пытаюсь его подключить через hplip. Ставлю hplip 3.11.10-alt1.M60P.1,
> присутствующий в используемом мной p6. Принтер определяется, печатает
> правильно, но двусторонняя печать недоступна. Вообще такой настройки
> нет.
> 
> Пересобрал версию hplip из t6: 3.12.9-alt1.M60T.1. С ним принтер тоже
> определяется, устанавливается, в настройках двусторонняя печать, но
> принтер не печатает. При попытке напечатать тестовую страницу задание
> обламывается с сообщением:
> 
> /usr/lib/cups/filter/hpcups failed
> 
> Вывод hp-check -t приложил.

"warning: Printer is not HPLIP installed. Printers must use
the hp: or hpfax: CUPS backend for HP-Devices" намекает на
осмысленность "сбэкапить /etc/cups, снести этот принтер,
настроить заново как hplip".

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Comm] /usr/lib/cups/filter/hpcups failed
  2012-11-07  7:50 ` Michael Shigorin
@ 2012-11-07 10:03   ` Denis G. Samsonenko
  0 siblings, 0 replies; 5+ messages in thread
From: Denis G. Samsonenko @ 2012-11-07 10:03 UTC (permalink / raw)
  To: shigorin, ALT Linux Community general discussions, Igor Vlasenko

Михаил!

7 ноября 2012 г., 14:50 пользователь Michael Shigorin написал:
> "warning: Printer is not HPLIP installed. Printers must use
> the hp: or hpfax: CUPS backend for HP-Devices" намекает на
> осмысленность "сбэкапить /etc/cups, снести этот принтер,
> настроить заново как hplip".

Этот варнинг относится к варианту установки через foo2zjs, который как
раз работает. Там же есть и вариант установки через hplip, но который
не работает.

Дома у меня на другом принтере (HP LaserJet P1102w) оба варианта (и
foo2zjs, и hplip) работают, а тут нет.

-- 
Всего доброго,

Денис.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Comm] /usr/lib/cups/filter/hpcups failed
  2012-11-07  3:20 [Comm] /usr/lib/cups/filter/hpcups failed Denis G. Samsonenko
  2012-11-07  7:50 ` Michael Shigorin
@ 2012-11-07 10:53 ` Igor Vlasenko
  2012-11-08  3:12   ` Denis G. Samsonenko
  1 sibling, 1 reply; 5+ messages in thread
From: Igor Vlasenko @ 2012-11-07 10:53 UTC (permalink / raw)
  To: ALT Linux Community general discussions

On Wed, Nov 07, 2012 at 09:20:37AM +0600, Denis G. Samsonenko wrote:
> Пересобрал версию hplip из t6: 3.12.9-alt1.M60T.1. С ним принтер тоже
> определяется, устанавливается, в настройках двусторонняя печать, но
> принтер не печатает. При попытке напечатать тестовую страницу задание
> обламывается с сообщением:
> 
> /usr/lib/cups/filter/hpcups failed
> Вывод hp-check -t приложил.

Этого недостаточно, надо посмотреть диагностику в логах, 
там должна была остаться ругань от падения hpcups.
Например, перестартовать cups, запустить
su -c "hp-logcapture"
и послать пробу на печать.
или руками логи посмотреть.

-- 

Dr. Igor Vlasenko
--------------------
Topology Department
Institute of Math
Kiev, Ukraine


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Comm] /usr/lib/cups/filter/hpcups failed
  2012-11-07 10:53 ` Igor Vlasenko
@ 2012-11-08  3:12   ` Denis G. Samsonenko
  0 siblings, 0 replies; 5+ messages in thread
From: Denis G. Samsonenko @ 2012-11-08  3:12 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 423 bytes --]

День добрый!

7 ноября 2012 г., 17:53 пользователь Igor Vlasenko написал:
> Этого недостаточно, надо посмотреть диагностику в логах,
> там должна была остаться ругань от падения hpcups.
> Например, перестартовать cups, запустить
> su -c "hp-logcapture"

hp-logcapture как-то странно отработала.

> и послать пробу на печать.
> или руками логи посмотреть.

Собрал логи руками, прилагаю к письму.

-- 
Всего доброго,

Денис.

[-- Attachment #2: logs.tar.gz --]
[-- Type: application/x-gzip, Size: 3331 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2012-11-08  3:12 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-07  3:20 [Comm] /usr/lib/cups/filter/hpcups failed Denis G. Samsonenko
2012-11-07  7:50 ` Michael Shigorin
2012-11-07 10:03   ` Denis G. Samsonenko
2012-11-07 10:53 ` Igor Vlasenko
2012-11-08  3:12   ` Denis G. Samsonenko

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git