From: "Алексей Данилович" <mlists@list.ru> To: ALT Linux Community general discussions <community@lists.altlinux.org> Subject: [Comm] MSI wind U90 и 4.1.1 Date: Thu, 5 Mar 2009 13:24:14 +0300 Message-ID: <94a6689a0903050224u516d31ebq2adb84df2d53cb2b@mail.gmail.com> (raw) Доброго времени суток Купил вот себе порося, хочу постаивть альт. нарезал флешку с altlinux-4.1.1-desktop-i586-install-flash.img. Установил. В упор не видит wifi. ядро 2.6.25-std-def-alt8.M41.4. Нашел на багзилле что вроде как поддержка этих карточек уже включена, но dmesg и lspci не показывают его в упор. Я что-то делаю не так или msi мне не завести под альтом? Я читал вроде что там было что-то с образом, но исправилось или нет не знаю. И удасться ли завести камеру? lspci и dmesg прикладываю в тексте, вложения тут не получатся, сори. Большое спасибо. 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 02) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8199 (rev 22)\ Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.25-std-def-alt8.M41.4 (builder@apiary.int.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt2)) #1 SMP Sat Dec 6 14:42:12 MSK 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f5b2000 (usable) BIOS-e820: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS) BIOS-e820: 000000003f5d5000 - 000000003f5e6000 (reserved) BIOS-e820: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS) BIOS-e820: 000000003f5e9000 - 000000003f605000 (reserved) BIOS-e820: 000000003f605000 - 000000003f606000 (ACPI NVS) BIOS-e820: 000000003f606000 - 000000003f608000 (reserved) BIOS-e820: 000000003f608000 - 000000003f611000 (ACPI data) BIOS-e820: 000000003f611000 - 000000003f617000 (ACPI NVS) BIOS-e820: 000000003f617000 - 000000003f700000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 117MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009ec00 for 1024 bytes. Entering add_active_range(0, 0, 259506) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259506 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 259506 On node 0 totalpages: 259506 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 235 pages used for memmap HighMem zone: 29895 pages, LIFO batch:7 Movable zone: 0 pages used for memmap DMI 2.4 present. ACPI: RSDP 000F03C0, 0024 (r2 MSI_NB) ACPI: XSDT 3F60FF10, 005C (r1 MSI_NB MEGABOOK 6222004 MSFT 10013) ACPI: FACP 3F5E6C10, 00F4 (r4 MSI_NB MEGABOOK 6222004 MSFT 10013) ACPI: DSDT 3F608010, 5337 (r1 MSI_NB MEGABOOK 0 INTL 20051117) ACPI: FACS 3F611D40, 0040 ACPI: APIC 3F610E90, 005C (r2 MSI_NB MEGABOOK 6222004 MSFT 10013) ACPI: MCFG 3F615C90, 003C (r1 MSI_NB MEGABOOK 6222004 MSFT 97) ACPI: SLIC 3F612C10, 0176 (r1 MSI_NB MEGABOOK 6222004 MSFT 97) ACPI: SSDT 3F605510, 04CE (r2 PmRef CpuPm 3000 INTL 20051117) ACPI: SSDT 3F5E8A10, 0232 (r2 PmRef Cpu0Tst 3000 INTL 20051117) ACPI: SSDT 3F611A10, 00A0 (r2 PmRef Cpu1Tst 3000 INTL 20051117) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 7:12 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 7:12 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f700000:c0400000) PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257479 Kernel command line: auto BOOT_IMAGE=2625-std-def-8M414 ro root=801 resume=/dev/disk/by-uuid/802b676f-6ac5-4336-92cf-a85ea3df2dde panic=30 splash=silent bootsplash: silent mode. mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1600.130 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1023468k/1038024k available (2268k kernel code, 13940k reserved, 778k data, 392k init, 120520k highmem) virtual kernel memory layout: fixmap : 0xffe13000 - 0xfffff000 (1968 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0501000 - 0xc0563000 ( 392 kB) .data : 0xc04370ae - 0xc04f9ba0 ( 778 kB) .text : 0xc0200000 - 0xc04370ae (2268 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated spurious 8259A interrupt: IRQ7. Calibrating delay using timer specific routine.. 3205.87 BogoMIPS (lpj=6411753) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 ip 4000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3200.21 BogoMIPS (lpj=6400435) CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 Total of 2 processors activated (6406.09 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1808 bytes CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 domain 1: span 00000003 groups: 00000003 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 domain 1: span 00000003 groups: 00000003 net_namespace: 548 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: MICRO-STAR INTERNATIONAL CO., LTD ACPI: DMI Product Name: U-100 ACPI: DMI Product Version: Ver.001 ACPI: DMI Board Name: U-100 ACPI: DMI BIOS Vendor: American Megatrends Inc. ACPI: DMI BIOS Date: 07/16/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: Force enabled HPET at 0xfed03000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x400-0x47f has been reserved system 00:09: ioport range 0x1180-0x119f has been reserved system 00:09: ioport range 0x500-0x53f has been reserved system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: c000-cfff MEM window: 0xdfd00000-0xdfdfffff PREFETCH window: 0x00000000ffd00000-0x00000000ffdfffff PCI: Bridge: 0000:00:1c.1 IO window: b000-bfff MEM window: 0xdfc00000-0xdfcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 884k freed audit: initializing netlink socket (disabled) type=2000 audit(1236254839.572:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3750k, total 7872k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 133202 bytes bootsplash: ...found (800x600, 12886 bytes, v3). Console: switching to colour frame buffer device 97x34 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found hpet_resources: 0xfed03000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 392k freed Write protecting the kernel read-only data: 588k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Executing init=/init SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0a0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0a8 irq 15 ata1.00: ATA-8: TOSHIBA MK8052GSX, LV010J, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8052GS LV01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver libusual Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.4 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: unable to enumerate USB device on port 1 usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb 1-6: New USB device found, idVendor=0bda, idProduct=0158 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: Product: USB2.0-CRW usb 1-6: Manufacturer: Generic usb 1-6: SerialNumber: 20071114173400000 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.4 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.4 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.4 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-1: configuration #1 chosen from 1 choice input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2 input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1 usb 2-1: New USB device found, idVendor=046d, idProduct=c018 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB Optical Mouse usb 2-1: Manufacturer: Logitech usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.4 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sdb] Attached SCSI removable disk usb-storage: device scan complete PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /devices/platform/pcspkr/input/input3 Real Time Clock Driver v1.12ac sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 iTCO_vendor_support: vendor-support=0 Linux agpgart interface v0.103 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 r8169 0000:01:00.0: unknown MAC (37a00000) eth0: RTL8169 at 0xf8dec000, 00:21:85:50:ea:1f, XID 34a00000 IRQ 221 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) agpgart: Detected an Intel 945GME Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C09:00/PNP0C0D:00/input/input5 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 ACPI: SSDT 3F5E8C90, 0253 (r2 PmRef Cpu0Ist 3000 INTL 20051117) ACPI: SSDT 3F5E7690, 0653 (r2 PmRef Cpu0Cst 3001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3F5E8F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117) ACPI: SSDT 3F611B10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7 ACPI: Sleep Button (CM) [SLPB] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64. ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (60 C) input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input8 iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: device:1c is registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/input/input9 atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. ACPI: Video Device [IGD] (multi-head: yes rom: no post: no) ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: WMI: Mapper loaded Marking TSC unstable due to: TSC halts in idle. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k EXT3 FS on sda1, internal journal device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com Clocksource tsc unstable (delta = -292766502 ns) warning: `dnsmasq' uses 32-bit capabilities (legacy support in use) rtc_cmos: probe of 00:04 failed with error -16 intel_rng: FWH not detected atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. bootsplash 3.1.6-2004/03/31: looking for picture... atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. bootsplash: silentjpeg size 133202 bytes bootsplash: ...found (800x600, 12886 bytes, v3). bootsplash: status on console 1 changed to on atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known. r8169: eth0: link down
next reply other threads:[~2009-03-05 10:24 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-03-05 10:24 Алексей Данилович [this message] 2009-03-05 10:42 ` Алексей Данилович 2009-03-05 10:52 ` Slava Dubrovskiy 2009-03-05 10:55 ` Алексей Данилович 2009-03-05 11:04 ` Slava Dubrovskiy 2009-03-05 11:07 ` Алексей Данилович 2009-03-05 11:36 ` Алексей Данилович 2009-03-05 11:43 ` Алексей Данилович 2009-03-05 12:03 ` Владимир Гусев 2009-03-05 11:42 ` Владимир Гусев 2009-03-05 11:41 ` Владимир Гусев 2009-03-05 12:25 ` Slava Dubrovskiy 2009-03-05 13:16 ` Владимир Гусев 2009-03-05 21:27 ` Maks Re 2009-03-06 7:45 ` Dmitriy Kruglikov 2009-03-06 12:13 ` Slava Dubrovskiy 2009-03-06 12:40 ` Владимир Гусев 2009-03-06 12:58 ` Slava Dubrovskiy 2009-03-06 22:56 ` Владимир Гусев 2009-03-08 9:36 ` Dmitriy Kruglikov 2009-03-05 11:38 ` Владимир Гусев
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=94a6689a0903050224u516d31ebq2adb84df2d53cb2b@mail.gmail.com \ --to=mlists@list.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git