* [Comm] Конкверор игнорирует настройки прокси
@ 2007-10-03 9:55 Алексей Данилович
2007-10-03 12:33 ` Olexander Chernetskyy
0 siblings, 1 reply; 5+ messages in thread
From: Алексей Данилович @ 2007-10-03 9:55 UTC (permalink / raw)
To: ALT Linux Community general discussions
Доброго времени суток.
Навеяно прошлым тредом конкверор vs лисица.... У мну в последней
неверно печатаются, например, описания с www.nix.ru. Решил попробовать
конкверор. И наткнулся на сабдж. Дистр ALD4.0. Кто-нибудь сталкивался?
Спасибо.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Конкверор игнорирует настройки прокси
2007-10-03 9:55 [Comm] Конкверор игнорирует настройки прокси Алексей Данилович
@ 2007-10-03 12:33 ` Olexander Chernetskyy
2007-10-03 12:38 ` Алексей Данилович
0 siblings, 1 reply; 5+ messages in thread
From: Olexander Chernetskyy @ 2007-10-03 12:33 UTC (permalink / raw)
To: community
> Доброго времени суток.
>
> Навеяно прошлым тредом конкверор vs лисица.... У мну в последней
> неверно печатаются, например, описания с www.nix.ru. Решил попробовать
> конкверор. И наткнулся на сабдж. Дистр ALD4.0. Кто-нибудь сталкивался?
>
> Спасибо.
Угу. У меня имеется 2 прокси, и оба требуют авторизацию. 1 - ISA, 2 - SQUID.
В настройках конкверора стоит "Запрашивать пароль при необходимости"
Так вот. Со сквидом все нормально. При первой попытке доступа в интернет
вылазит окно авторизации и дальше всё как и должно быть.
А если в качестве прокси ISA то окно авторизации не появляется и потом
говорит "Ошибка при загрузке htpp://bla-bla-bla Истекло время ожидания
прокси ххх.ххх.ххх.ххх, порт ХХХХ"
У меня так.
--
Best regards,
ArCher
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Конкверор игнорирует настройки прокси
2007-10-03 12:33 ` Olexander Chernetskyy
@ 2007-10-03 12:38 ` Алексей Данилович
2007-10-03 17:47 ` Gleb Kulikov
0 siblings, 1 reply; 5+ messages in thread
From: Алексей Данилович @ 2007-10-03 12:38 UTC (permalink / raw)
To: sp_archer, ALT Linux Community general discussions
Не-а, не то. У мну вылезает таймоут на порту 80, а в настройках
прописан в прямую порт 3128. И никаких паролей там нет, таже лисичка
прекрасно работает. И это squid/
03.10.07, Olexander Chernetskyy<sp_archer@meta.ua> написал(а):
>
> > Доброго времени суток.
> >
> > Навеяно прошлым тредом конкверор vs лисица.... У мну в последней
> > неверно печатаются, например, описания с www.nix.ru. Решил попробовать
> > конкверор. И наткнулся на сабдж. Дистр ALD4.0. Кто-нибудь сталкивался?
> >
> > Спасибо.
>
> Угу. У меня имеется 2 прокси, и оба требуют авторизацию. 1 - ISA, 2 - SQUID.
> В настройках конкверора стоит "Запрашивать пароль при необходимости"
> Так вот. Со сквидом все нормально. При первой попытке доступа в интернет
> вылазит окно авторизации и дальше всё как и должно быть.
> А если в качестве прокси ISA то окно авторизации не появляется и потом
> говорит "Ошибка при загрузке htpp://bla-bla-bla Истекло время ожидания
> прокси ххх.ххх.ххх.ххх, порт ХХХХ"
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Конкверор игнорирует настройки прокси
2007-10-03 12:38 ` Алексей Данилович
@ 2007-10-03 17:47 ` Gleb Kulikov
2007-10-04 3:24 ` Sergey Sharavin
0 siblings, 1 reply; 5+ messages in thread
From: Gleb Kulikov @ 2007-10-03 17:47 UTC (permalink / raw)
To: mlists, ALT Linux Community general discussions
В сообщении от Среда 03 октября 2007 Алексей Данилович написал:
> Не-а, не то. У мну вылезает таймоут на порту 80, а в настройках
> прописан в прямую порт 3128. И никаких паролей там нет, таже лисичка
> прекрасно работает. И это squid/
Не подтверждаю. Сквид, два десятка машин, конкверор, полёт нормальный.
По крайней мере, при указании порта 8080, другие не пробовал.
--
Салют, /GLeb
UIN: 15341920
jabber://gleb@asd.iao.ru
sip://2387245@sipnet.ru (telephony)
skype://gleb_kulikov.tomsk (telephony)
sip://20000204@sip.pctel.ru (telephony)
netmail: 2:5005/78
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Конкверор игнорирует настройки прокси
2007-10-03 17:47 ` Gleb Kulikov
@ 2007-10-04 3:24 ` Sergey Sharavin
0 siblings, 0 replies; 5+ messages in thread
From: Sergey Sharavin @ 2007-10-04 3:24 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Thursday 04 October 2007 00:47:01 Gleb Kulikov написал(а):
> В сообщении от Среда 03 октября 2007 Алексей Данилович написал:
> > Не-а, не то. У мну вылезает таймоут на порту 80, а в настройках
> > прописан в прямую порт 3128. И никаких паролей там нет, таже лисичка
> > прекрасно работает. И это squid/
>
> Не подтверждаю. Сквид, два десятка машин, конкверор, полёт нормальный.
> По крайней мере, при указании порта 8080, другие не пробовал.
То же не могу подтвердить, всё работает, порт 8090
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-10-04 3:24 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-10-03 9:55 [Comm] Конкверор игнорирует настройки прокси Алексей Данилович
2007-10-03 12:33 ` Olexander Chernetskyy
2007-10-03 12:38 ` Алексей Данилович
2007-10-03 17:47 ` Gleb Kulikov
2007-10-04 3:24 ` Sergey Sharavin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git