From: Teimuraz Abashidze <tgasoft@gmail.com> To: ALT Linux Community general discussions <community@lists.altlinux.org> Subject: [Comm] Branch 5.0: всякие глюки Date: Sun, 15 Feb 2009 13:49:13 +0400 Message-ID: <7ddd15690902150149p3f508730u15f7b786e5cd19de@mail.gmail.com> (raw) Дано: АлтЛинукс Бранч 5.0, апдейтенный с 4.1 Комп - HP Compaq dx7400 Microtower # lspci 00:00.0 Host bridge: Intel Corporation 82Q33 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82Q33 Express PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce GTX 260] (rev a1) 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5786 Gigabit Ethernet PCI Express (rev 02) Два винта SATA 400 ГБ + 1 ТБ. 3 ГБ памяти. Глюк первый. При обновлении ядра в /etc/lilo.conf упорно пишет, что винт /dev/hda, хотя он на самом деле, естественно, /dev/sda # fdisk -l Disk /dev/sda: 400.1 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x45cf150f Device Boot Start End Blocks Id System /dev/sda1 * 1 2611 20972826 7 HPFS/NTFS /dev/sda2 2612 2742 1052257+ 82 Linux swap / Solaris /dev/sda3 2743 5234 20016990 83 Linux /dev/sda4 5235 48641 348666727+ f W95 Ext'd (LBA) /dev/sda5 5235 27096 175606483+ 7 HPFS/NTFS /dev/sda6 27097 48641 173060181 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x06a28a76 Device Boot Start End Blocks Id System /dev/sdb1 1 57367 460800396 7 HPFS/NTFS /dev/sdb2 57368 121601 515959605 7 HPFS/NTFS Кроме того, в /etc/lilo.conf все разделы у меня прописаны UUID-ами специально. В результате после каждого обновления ядра приходится /etc/lilo.conf править ручками, иначе при перезагрузке пишет 99 99 99 99 99 на весь экран и приходится грузиться с LiveCD. На 4.1 этого не было. Глюк второй. При загрузке заметил, что подхватились сенсоры материнки, и полюбопытствовал, что же мне покажет команда sensors. # sensors w83627dhg-isa-0290 Adapter: ISA adapter VCore: +1.18 V (min = +0.00 V, max = +1.74 V) in1: +12.14 V (min = +3.64 V, max = +1.69 V) ALARM AVCC: +3.30 V (min = +2.11 V, max = +0.03 V) ALARM 3VCC: +3.30 V (min = +0.26 V, max = +2.11 V) ALARM in4: +1.59 V (min = +1.55 V, max = +1.80 V) in5: +0.94 V (min = +0.03 V, max = +1.82 V) in6: +2.30 V (min = +1.28 V, max = +4.10 V) VSB: +3.30 V (min = +0.83 V, max = +2.88 V) ALARM VBAT: +3.25 V (min = +0.00 V, max = +2.69 V) ALARM Case Fan: 0 RPM (min = 4218 RPM, div = 64) ALARM CPU Fan: 1171 RPM (min = 1180 RPM, div = 8) ALARM Aux Fan: 0 RPM (min = 4440 RPM, div = 16) ALARM fan4: 1214 RPM (min = 6490 RPM, div = 8) ALARM fan5: 0 RPM (min = 1757 RPM, div = 64) ALARM Sys Temp: +41°C (high = -75°C, hyst = -126°C) [thermistor] ALARM CPU Temp: +40.0°C (high = +120.0°C, hyst = +100.0°C) [transistor] AUX Temp: +58.5°C (high = +80.0°C, hyst = +75.0°C) [thermistor] vid: +0.000 V ИМХО полный бред, впечатление, что датчики местами перепутаны. При этом все нормально работает (естественно). Глюки compiz-а. Решил поиграться с Compiz-ом. Поставил compiz-fusion ну и что там до кучи... Все красиво, летает просто. Однако глюки с firefox-ом - заголовок окна (где кнопки минимизации. закрытия и т.д.) не показывает, уменьшить/увеличить окно не могу, кроме того внизу не видна панель КДЕ, чтобы что-то сделать, приходится Алт-Табом переключаться. После изменения хоть чего-то в compiz manager в konsole перестают переключаться мышью вкладки и скроллинг не работает. Минимизирую/максимизирую его окошко - и все в норме. С другими программами такого не происходит, однако: несмотря на то, что в свойствах панели "Allow another windows to cover the panel" отключено, другие окна могут перекрывать панель. Кроме того, при включении в свойствах окна "Move to another workplace" окно просто исчезает - как с экрана, так и из списков процессов, т.е. фактически просто закрывается без всяких вопросов... Best regards, Teimuraz Abashidze -------------------------------------------- ---Visit my home page: http://tga.pvt.ge http://raindi.ge/taichi http://picasaweb.google.com/tgasoft/
next reply other threads:[~2009-02-15 9:49 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-02-15 9:49 Teimuraz Abashidze [this message] 2009-02-15 12:05 ` Teimuraz Abashidze
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=7ddd15690902150149p3f508730u15f7b786e5cd19de@mail.gmail.com \ --to=tgasoft@gmail.com \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git