ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [mdk-re] Abit KT7-100 (HPT370)
@ 2001-05-16 19:00 Dmitry Koudryavtsev
  2001-05-16 23:35 ` Igor Solovyov
  0 siblings, 1 reply; 2+ messages in thread
From: Dmitry Koudryavtsev @ 2001-05-16 19:00 UTC (permalink / raw)
  To: mandrake-russian

Здравствуйте,

Подскажите, пожалуйста, как поставить (если это возможно)
Mandrake 7.0RE (full) на сабж (Raid-0) ?
Или где можно посмотреть архив рассылки
(помню что-то было по этому поводу) ?

Best regards,
Dmitry Koudryavtsev
mailto:juliasoft@mail.ru
http://juliasoft.chat.ru





^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [mdk-re] Abit KT7-100 (HPT370)
  2001-05-16 19:00 [mdk-re] Abit KT7-100 (HPT370) Dmitry Koudryavtsev
@ 2001-05-16 23:35 ` Igor Solovyov
  0 siblings, 0 replies; 2+ messages in thread
From: Igor Solovyov @ 2001-05-16 23:35 UTC (permalink / raw)
  To: mandrake-russian

Hi!
On Wed, 16 May 2001 19:07:16 +0400
Dmitry Koudryavtsev <juliasoft@mail.ru> wrote:

> Здравствуйте,
> 
> Подскажите, пожалуйста, как поставить (если это возможно)
> Mandrake 7.0RE (full) на сабж (Raid-0) ?
> Или где можно посмотреть архив рассылки
> (помню что-то было по этому поводу) ?

Сначала "изготовьте" RAID. Грузитесь с дискеты (см. каталог /images дистрибутива).
На приглашение boot: введите linux ide2=adr1,adr2,irq ide3=adr3,adr4,irq,
где adr1-4 - адреса используемые Вашим контроллером (можно подглядеть в Windows). 
Дальше все стандартно.

-- 
Best regards!
Igor Solovyov
Zlatoust, Russia



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2001-05-16 23:35 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-05-16 19:00 [mdk-re] Abit KT7-100 (HPT370) Dmitry Koudryavtsev
2001-05-16 23:35 ` Igor Solovyov

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git