[Comm] настройка ppp на ms-chap-v2

[Comm] настройка ppp на ms-chap-v2

[Серебряков Владимир Анатольевич]

Народ, кто нить сталкивался с настройкой ppp, когда у провайдена ms-chap протокол v2
Если есть время и желание - посмотрите как пытался настроить;)
Мож кто кинет сцылку на подробную доку (для чайников)

Скрипты:
Ppp-on:
---------------
TELEPHONE=222333
LOCAL_IP=0.0.0.0
REMOTE_IP=0.0.0.0
NETMASK=255.255.255.0
export TELEPHONE
DIALER_SCRIPT=/etc/ppp/ppp-on-dialer
exec /usr/sbin/pppd /dev/modem 57600 connect $LOCAL_IP:$REMOTE_IP netmask $NETMASK connect $DIALER_SCRIPT

Ppp-on-dialer:
----------------
#!/bin/sh
exec chat -v                                    \
TIMEOUT         3                               \
ABORT           '\nBUSY\r'                      \
ABORT           '\nNO ANSWER\r'                 \
ABORT           '\nRINGING\r\n\r\nRINGING\r'    \
''              \rAT                            \
'OK-+++\c-OK'   ATH0                            \
TIMEOUT         30                              \
OK              ATDT$TELEPHONE                  \
''              ATA                             \
CONNECT         ''

Options:
-----------------
lock
require-mschap-v2
lcp-max-configure 40
modem
crtscts
debug
kdebug 0
-detach

Модем дозванивается, долго торгуется и выдает:
Connect: ppp0 <--> /dev/modem
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xa7255a43> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xa7255a43> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x4f <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x4f <auth pap>]
rcvd [LCP ConfNak id=0x1 <auth chap MD5>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xa7255a43> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x50 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x50 <auth pap>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0xa7255a43> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x51 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x51 <auth pap>]
rcvd [LCP ConfReq id=0x52 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x52 <auth pap>]
rcvd [LCP ConfReq id=0x53 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x53 <auth pap>]
rcvd [LCP ConfReq id=0x54 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x54 <auth pap>]
rcvd [LCP ConfReq id=0x55 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x55 <auth pap>]
rcvd [LCP ConfReq id=0x56 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x56 <auth pap>]
rcvd [LCP ConfReq id=0x57 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x57 <auth pap>]
rcvd [LCP ConfReq id=0x58 <asyncmap 0xa0000> <auth pap> <magic 0x29090710> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x58 <auth pap>]
rcvd [LCP TermReq id=0x59]
sent [LCP TermAck id=0x59]
Modem hangup
Connection terminated.

В логах:
-------------------
pppd 2.4.2b3 started by root, uid 0
timeout set to 3 seconds
abort on (\nBUSY\r)
abort on (\nNO ANSWER\r)
abort on (\nRINGING\r\n\r\nRINGING\r)
send (rAT^M)
expect (OK)
rAT^M^M
OK
 -- got it
send (ATH0^M)
timeout set to 30 seconds
expect (OK)
^M
ATH0^M^M
OK
 -- got it
send (ATDT222333^M)
send (ATA^M)
expect (CONNECT)
^M
ATDT9737649^MA^M
CONNECT
 -- got it
send (^M)
expect (~)
 50666/ARQ^M
Unauthorized use is prohibited.^M
alarm
send (^M)
send (^M)
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/modem
Modem hangup
Connection terminated.
Exit.