* [Comm] При старте KDE отваливается тачпад
@ 2015-04-10 8:43 Kharitonov A. Dmitry
2015-04-10 13:28 ` Sergey V Turchin
2015-04-11 18:39 ` Kharitonov A. Dmitry
0 siblings, 2 replies; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-10 8:43 UTC (permalink / raw)
To: community
При старте KDE отваливается тачпад.
В окне ввода пароля тачпад работает. В процессе загрузки KDE перестаёт
работать.
При завершении сеанса KDE появляется окно вода пароля там опять работает.
Помогите советами.
user@eee2 11:37:58> rpm -qa | grep syn [~]
libasyncns-0.8-alt2.qa1
i586-libasyncns-0.8-alt2.qa1
xorg-conf-synaptics-0.2-alt1
synaptic-usermode-1.3-alt3
libsyndication4-4.12.4-alt0.M70P.1
rsync-3.0.9-alt2
fluidsynth-1.1.6-alt1
libfluidsynth-1.1.6-alt1
libcsync-0.50.6-alt1
kde4-synaptiks-0.8.1-alt4
synaptic-kde-1.0-alt2
synaptic-0.58-alt13.M70P.1
xorg-drv-synaptics-1.7.3-alt1
user@eee2 11:39:08> synclient | grep ouc [~]
TouchpadOff = 0
user@eee2 11:41:38> uname -a [~]
Linux eee2.altdomain 3.14.36-std-def-alt1 #1 SMP Wed Mar 18 14:51:51 UTC
2015 x86_64 GNU/Linux
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-10 8:43 [Comm] При старте KDE отваливается тачпад Kharitonov A. Dmitry
@ 2015-04-10 13:28 ` Sergey V Turchin
2015-04-10 17:33 ` Kharitonov A. Dmitry
2015-04-11 18:39 ` Kharitonov A. Dmitry
1 sibling, 1 reply; 11+ messages in thread
From: Sergey V Turchin @ 2015-04-10 13:28 UTC (permalink / raw)
To: ALT Linux Community general discussions
On Friday 10 April 2015 11:43:08 Kharitonov A wrote:
> При старте KDE отваливается тачпад.
>
> В окне ввода пароля тачпад работает. В процессе загрузки KDE перестаёт
> работать.
> При завершении сеанса KDE появляется окно вода пароля там опять работает.
Видимо, запуск
/usr/share/kde4/autostart/synaptiks_*.desktop
влияет. synaptiks настраивали?
--
Regards, Sergey. ALT Linux, http://www.altlinux.ru/
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-10 13:28 ` Sergey V Turchin
@ 2015-04-10 17:33 ` Kharitonov A. Dmitry
2015-04-10 17:48 ` Kharitonov A. Dmitry
2015-04-10 18:29 ` Kharitonov A. Dmitry
0 siblings, 2 replies; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-10 17:33 UTC (permalink / raw)
To: ALT Linux Community general discussions
10.04.2015 16:28, Sergey V Turchin пишет:
> On Friday 10 April 2015 11:43:08 Kharitonov A wrote:
>> При старте KDE отваливается тачпад.
>>
>> В окне ввода пароля тачпад работает. В процессе загрузки KDE перестаёт
>> работать.
>> При завершении сеанса KDE появляется окно вода пароля там опять работает.
> Видимо, запуск
> /usr/share/kde4/autostart/synaptiks_*.desktop
> влияет. synaptiks настраивали?
Не настраивал.
На запуск вручную появляется меню настройки.
Но настройка ни к чему не приводит.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-10 17:33 ` Kharitonov A. Dmitry
@ 2015-04-10 17:48 ` Kharitonov A. Dmitry
2015-04-10 18:29 ` Kharitonov A. Dmitry
1 sibling, 0 replies; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-10 17:48 UTC (permalink / raw)
To: ALT Linux Community general discussions
[-- Attachment #1: Type: text/plain, Size: 3760 bytes --]
10.04.2015 20:33, Kharitonov A. Dmitry пишет:
> 10.04.2015 16:28, Sergey V Turchin пишет:
>> On Friday 10 April 2015 11:43:08 Kharitonov A wrote:
>>> При старте KDE отваливается тачпад.
>>>
>>> В окне ввода пароля тачпад работает. В процессе загрузки KDE перестаёт
>>> работать.
>>> При завершении сеанса KDE появляется окно вода пароля там опять
>>> работает.
>> Видимо, запуск
>> /usr/share/kde4/autostart/synaptiks_*.desktop
>> влияет. synaptiks настраивали?
> Не настраивал.
> На запуск вручную появляется меню настройки.
> Но настройка ни к чему не приводит.
Система видит тачпал, но почему-то
[ 968.408] (**) ETPS/2 Elantech Touchpad: Ignoring device from
InputClass "touchpad ignore duplicates"
[ 968.353] (II) config/udev: Adding input device ETPS/2 Elantech
Touchpad (/dev/input/event10)
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev
touchpad catchall"
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass
"touchpad catchall"
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default
clickpad buttons"
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass
"touchpad catchall"
[ 968.354] (II) LoadModule: "synaptics"
[ 968.354] (II) Loading /usr/lib64/X11/modules/input/synaptics_drv.so
[ 968.355] (II) Module synaptics: vendor="X.Org Foundation"
[ 968.355] compiled for 1.14.5, module version = 1.7.3
[ 968.355] Module class: X.Org XInput Driver
[ 968.355] ABI class: X.Org XInput driver, version 19.1
[ 968.355] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech
Touchpad'
[ 968.355] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 968.355] (**) Option "Device" "/dev/input/event10"
[ 968.388] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch
events for semi-multitouch device
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 -
1216 (res 0)
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 -
512 (res 0)
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0
- 255
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: finger width
range 0 - 15
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left
right double triple
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2
Product 0xe
[ 968.388] (**) Option "ClickTime" "100"
[ 968.388] (**) Option "TapButton1" "1"
[ 968.389] (**) Option "ClickFinger1" "1"
[ 968.389] (**) Option "ClickFinger2" "1"
[ 968.389] (**) Option "ClickFinger3" "1"
[ 968.389] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 968.389] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 968.406] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input8/event10"
[ 968.406] (II) XINPUT: Adding extended input device "ETPS/2 Elantech
Touchpad" (type: TOUCHPAD, id 15)
[ 968.406] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed
is now constant deceleration 2.5
[ 968.406] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed
is now 1.75
[ 968.406] (**) synaptics: ETPS/2 Elantech Touchpad: (accel)
AccelFactor is now 0.152
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration
scheme 1
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor:
2.000
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration
threshold: 4
[ 968.407] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 968.408] (II) config/udev: Adding input device ETPS/2 Elantech
Touchpad (/dev/input/mouse1)
[ 968.408] (**) ETPS/2 Elantech Touchpad: Ignoring device from
InputClass "touchpad ignore duplicates"
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 40658 bytes --]
[ 967.274]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 967.275] X Protocol Version 11, Revision 0
[ 967.275] Build Operating System: ALT Linux Sisyphus (20081222) x86_64
[ 967.275] Current Operating System: Linux eee2.altdomain 3.14.36-std-def-alt1 #1 SMP Wed Mar 18 14:51:51 UTC 2015 x86_64
[ 967.275] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=8ab97a60-8a03-4986-8da4-ab8644ca9929 ro quiet=1 resume=/dev/disk/by-uuid/c14aa3bf-e9cd-412e-9f9d-5144af48d3f7 panic=30 splash
[ 967.275] Build Date: 29 January 2014 10:51:02PM
[ 967.275]
[ 967.275] Current version of pixman: 0.28.2
[ 967.275] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 967.275] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 967.276] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 10 20:26:28 2015
[ 967.311] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 967.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 967.323] (==) No Layout section. Using the first Screen section.
[ 967.323] (==) No screen section available. Using defaults.
[ 967.323] (**) |-->Screen "Default Screen Section" (0)
[ 967.323] (**) | |-->Monitor "<default monitor>"
[ 967.324] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 967.324] (==) Automatically adding devices
[ 967.324] (==) Automatically enabling devices
[ 967.324] (==) Automatically adding GPU devices
[ 967.324] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 967.324] (==) ModulePath set to "/usr/lib64/X11/modules"
[ 967.324] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 967.324] (II) Loader magic: 0x801ce0
[ 967.324] (II) Module ABI versions:
[ 967.324] X.Org ANSI C Emulation: 0.4
[ 967.324] X.Org Video Driver: 14.1
[ 967.324] X.Org XInput driver : 19.1
[ 967.324] X.Org Server Extension : 7.0
[ 967.325] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 967.329] (--) PCI:*(0:0:1:0) 1002:9807:1043:84e4 rev 0, Mem @ 0xd0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 967.330] Initializing built-in extension Generic Event Extension
[ 967.330] Initializing built-in extension SHAPE
[ 967.330] Initializing built-in extension MIT-SHM
[ 967.330] Initializing built-in extension XInputExtension
[ 967.330] Initializing built-in extension XTEST
[ 967.330] Initializing built-in extension BIG-REQUESTS
[ 967.330] Initializing built-in extension SYNC
[ 967.330] Initializing built-in extension XKEYBOARD
[ 967.330] Initializing built-in extension XC-MISC
[ 967.330] Initializing built-in extension SECURITY
[ 967.330] Initializing built-in extension XINERAMA
[ 967.330] Initializing built-in extension XFIXES
[ 967.330] Initializing built-in extension RENDER
[ 967.330] Initializing built-in extension RANDR
[ 967.330] Initializing built-in extension COMPOSITE
[ 967.330] Initializing built-in extension DAMAGE
[ 967.330] Initializing built-in extension MIT-SCREEN-SAVER
[ 967.330] Initializing built-in extension DOUBLE-BUFFER
[ 967.330] Initializing built-in extension RECORD
[ 967.330] Initializing built-in extension DPMS
[ 967.330] Initializing built-in extension X-Resource
[ 967.331] Initializing built-in extension XVideo
[ 967.331] Initializing built-in extension XVideo-MotionCompensation
[ 967.331] Initializing built-in extension SELinux
[ 967.331] Initializing built-in extension XFree86-VidModeExtension
[ 967.331] Initializing built-in extension XFree86-DGA
[ 967.331] Initializing built-in extension XFree86-DRI
[ 967.331] Initializing built-in extension DRI2
[ 967.331] (==) Matched ati as autoconfigured driver 0
[ 967.331] (==) Matched ati as autoconfigured driver 1
[ 967.331] (==) Matched modesetting as autoconfigured driver 2
[ 967.331] (==) Matched fbdev as autoconfigured driver 3
[ 967.331] (==) Matched vesa as autoconfigured driver 4
[ 967.331] (==) Assigned the driver to the xf86ConfigLayout
[ 967.374] (II) Executed /usr/libexec/X11/drv.d/x11
[ 967.375] (II) LoadModule: "glx"
[ 967.382] (II) Loading /usr/lib64/X11/modules/extensions/libglx.so
[ 967.383] (II) Module glx: vendor="X.Org Foundation"
[ 967.383] compiled for 1.14.5, module version = 1.0.0
[ 967.383] ABI class: X.Org Server Extension, version 7.0
[ 967.383] (==) AIGLX enabled
[ 967.383] Loading extension GLX
[ 967.383] (II) LoadModule: "ati"
[ 967.416] (II) Loading /usr/lib64/X11/modules/drivers/ati_drv.so
[ 967.416] (II) Module ati: vendor="X.Org Foundation"
[ 967.416] compiled for 1.14.0, module version = 7.1.0
[ 967.416] Module class: X.Org Video Driver
[ 967.416] ABI class: X.Org Video Driver, version 14.1
[ 967.417] (II) LoadModule: "radeon"
[ 967.417] (II) Loading /usr/lib64/X11/modules/drivers/radeon_drv.so
[ 967.433] (II) Module radeon: vendor="X.Org Foundation"
[ 967.433] compiled for 1.14.0, module version = 7.1.0
[ 967.433] Module class: X.Org Video Driver
[ 967.433] ABI class: X.Org Video Driver, version 14.1
[ 967.433] (II) LoadModule: "modesetting"
[ 967.434] (II) Loading /usr/lib64/X11/modules/drivers/modesetting_drv.so
[ 967.438] (II) Module modesetting: vendor="X.Org Foundation"
[ 967.438] compiled for 1.14.5, module version = 0.8.1
[ 967.438] Module class: X.Org Video Driver
[ 967.438] ABI class: X.Org Video Driver, version 14.1
[ 967.438] (II) LoadModule: "fbdev"
[ 967.439] (II) Loading /usr/lib64/X11/modules/drivers/fbdev_drv.so
[ 967.451] (II) Module fbdev: vendor="X.Org Foundation"
[ 967.451] compiled for 1.14.0, module version = 0.4.3
[ 967.451] Module class: X.Org Video Driver
[ 967.451] ABI class: X.Org Video Driver, version 14.1
[ 967.451] (II) LoadModule: "vesa"
[ 967.452] (II) Loading /usr/lib64/X11/modules/drivers/vesa_drv.so
[ 967.455] (II) Module vesa: vendor="X.Org Foundation"
[ 967.455] compiled for 1.14.0, module version = 2.3.2
[ 967.455] Module class: X.Org Video Driver
[ 967.455] ABI class: X.Org Video Driver, version 14.1
[ 967.455] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE
[ 967.475] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 967.475] (II) FBDEV: driver for framebuffer: fbdev
[ 967.475] (II) VESA: driver for VESA chipsets: vesa
[ 967.475] (++) using VT number 7
[ 967.482] (II) [KMS] Kernel modesetting enabled.
[ 967.482] (WW) Falling back to old probe method for modesetting
[ 967.482] (WW) Falling back to old probe method for fbdev
[ 967.482] (II) Loading sub module "fbdevhw"
[ 967.482] (II) LoadModule: "fbdevhw"
[ 967.483] (II) Loading /usr/lib64/X11/modules/libfbdevhw.so
[ 967.503] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 967.503] compiled for 1.14.5, module version = 0.0.2
[ 967.503] ABI class: X.Org Video Driver, version 14.1
[ 967.503] (WW) Falling back to old probe method for vesa
[ 967.504] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 967.504] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 967.504] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 967.504] (==) RADEON(0): Default visual is TrueColor
[ 967.504] (==) RADEON(0): RGB weight 888
[ 967.504] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 967.504] (--) RADEON(0): Chipset: "AMD Radeon HD 6200 Series Graphics" (ChipID = 0x9807)
[ 967.504] (II) Loading sub module "dri2"
[ 967.504] (II) LoadModule: "dri2"
[ 967.504] (II) Module "dri2" already built-in
[ 967.504] (II) Loading sub module "exa"
[ 967.504] (II) LoadModule: "exa"
[ 967.505] (II) Loading /usr/lib64/X11/modules/libexa.so
[ 967.505] (II) Module exa: vendor="X.Org Foundation"
[ 967.505] compiled for 1.14.5, module version = 2.6.0
[ 967.505] ABI class: X.Org Video Driver, version 14.1
[ 967.505] (II) RADEON(0): KMS Color Tiling: enabled
[ 967.505] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 967.505] (II) RADEON(0): KMS Pageflipping: enabled
[ 967.505] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 967.505] (II) RADEON(0): Output LVDS has no monitor section
[ 967.508] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 967.522] (II) RADEON(0): Output VGA-0 has no monitor section
[ 967.522] (II) RADEON(0): EDID for output LVDS
[ 967.522] (II) RADEON(0): Manufacturer: IVO Model: 3f4 Serial#: 0
[ 967.522] (II) RADEON(0): Year: 2010 Week: 10
[ 967.522] (II) RADEON(0): EDID Version: 1.3
[ 967.522] (II) RADEON(0): Digital Display Input
[ 967.522] (II) RADEON(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 967.522] (II) RADEON(0): Gamma: 2.20
[ 967.522] (II) RADEON(0): No DPMS capabilities specified
[ 967.522] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 967.522] (II) RADEON(0): First detailed timing is preferred mode
[ 967.522] (II) RADEON(0): redX: 0.578 redY: 0.346 greenX: 0.336 greenY: 0.560
[ 967.522] (II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.312 whiteY: 0.328
[ 967.523] (II) RADEON(0): Manufacturer's mask: 0
[ 967.523] (II) RADEON(0): Supported detailed timing:
[ 967.523] (II) RADEON(0): clock: 50.4 MHz Image Size: 223 x 125 mm
[ 967.523] (II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1344 h_border: 0
[ 967.523] (II) RADEON(0): v_active: 600 v_sync: 603 v_sync_end 613 v_blanking: 625 v_border: 0
[ 967.523] (II) RADEON(0): Unknown vendor-specific block f
[ 967.523] (II) RADEON(0): InfoVision
[ 967.523] (II) RADEON(0): M101NWT2 R2
[ 967.523] (II) RADEON(0): EDID (in hex):
[ 967.523] (II) RADEON(0): 00ffffffffffff0026cff40300000000
[ 967.523] (II) RADEON(0): 0a14010380160d780a21d09458568f27
[ 967.523] (II) RADEON(0): 1f505400000001010101010101010101
[ 967.523] (II) RADEON(0): 010101010101b0130040415819203020
[ 967.523] (II) RADEON(0): 3a00df7d000000190000000f00000000
[ 967.523] (II) RADEON(0): 00000000000000000001000000fe0049
[ 967.523] (II) RADEON(0): 6e666f566973696f6e0a2020000000fe
[ 967.523] (II) RADEON(0): 004d3130314e575432205232200a0011
[ 967.523] (II) RADEON(0): Printing probed modes for output LVDS
[ 967.523] (II) RADEON(0): Modeline "1024x600"x60.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 967.523] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 967.523] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 967.523] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 967.523] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 967.526] (II) RADEON(0): EDID for output HDMI-0
[ 967.540] (II) RADEON(0): EDID for output VGA-0
[ 967.540] (II) RADEON(0): Output LVDS connected
[ 967.540] (II) RADEON(0): Output HDMI-0 disconnected
[ 967.540] (II) RADEON(0): Output VGA-0 disconnected
[ 967.540] (II) RADEON(0): Using exact sizes for initial modes
[ 967.540] (II) RADEON(0): Output LVDS using initial mode 1024x600
[ 967.540] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 967.540] (II) RADEON(0): mem size init: gart size :3fdee000 vram size: s:18000000 visible:17d68000
[ 967.540] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 967.540] (==) RADEON(0): DPI set to (96, 96)
[ 967.540] (II) Loading sub module "fb"
[ 967.540] (II) LoadModule: "fb"
[ 967.541] (II) Loading /usr/lib64/X11/modules/libfb.so
[ 967.542] (II) Module fb: vendor="X.Org Foundation"
[ 967.542] compiled for 1.14.5, module version = 1.0.0
[ 967.542] ABI class: X.Org ANSI C Emulation, version 0.4
[ 967.542] (II) Loading sub module "ramdac"
[ 967.542] (II) LoadModule: "ramdac"
[ 967.542] (II) Module "ramdac" already built-in
[ 967.543] (II) UnloadModule: "modesetting"
[ 967.543] (II) Unloading modesetting
[ 967.543] (II) UnloadModule: "fbdev"
[ 967.543] (II) Unloading fbdev
[ 967.543] (II) UnloadSubModule: "fbdevhw"
[ 967.543] (II) Unloading fbdevhw
[ 967.543] (II) UnloadModule: "vesa"
[ 967.543] (II) Unloading vesa
[ 967.543] (--) Depth 24 pixmap format is 32 bpp
[ 967.543] (II) RADEON(0): [DRI2] Setup complete
[ 967.544] (II) RADEON(0): [DRI2] DRI driver: r600
[ 967.544] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 967.544] (II) RADEON(0): Front buffer size: 2560K
[ 967.544] (II) RADEON(0): VRAM usage limit set to 349171K
[ 967.544] (==) RADEON(0): Backing store disabled
[ 967.544] (II) RADEON(0): Direct rendering enabled
[ 967.544] (II) EXA(0): Driver allocated offscreen pixmaps
[ 967.545] (II) EXA(0): Driver registered support for the following operations:
[ 967.545] (II) Solid
[ 967.545] (II) Copy
[ 967.545] (II) Composite (RENDER acceleration)
[ 967.545] (II) UploadToScreen
[ 967.545] (II) DownloadFromScreen
[ 967.545] (II) RADEON(0): Acceleration enabled
[ 967.545] (==) RADEON(0): DPMS enabled
[ 967.545] (==) RADEON(0): Silken mouse enabled
[ 967.545] (II) RADEON(0): Set up textured video
[ 967.545] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 967.545] (II) RADEON(0): [XvMC] Extension initialized.
[ 967.545] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 967.546] (--) RandR disabled
[ 967.564] (II) SELinux: Disabled on system
[ 967.809] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 967.809] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 967.809] (II) AIGLX: enabled GLX_ARB_create_context
[ 967.809] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 967.809] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 967.809] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 967.809] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 967.812] (II) AIGLX: Loaded and initialized r600
[ 967.812] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 967.814] (II) RADEON(0): Setting screen physical size to 270 x 158
[ 968.243] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 968.243] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 968.243] (II) LoadModule: "evdev"
[ 968.243] (II) Loading /usr/lib64/X11/modules/input/evdev_drv.so
[ 968.244] (II) Module evdev: vendor="X.Org Foundation"
[ 968.244] compiled for 1.14.0, module version = 2.8.0
[ 968.244] Module class: X.Org XInput Driver
[ 968.244] ABI class: X.Org XInput driver, version 19.1
[ 968.244] (II) Using input driver 'evdev' for 'Power Button'
[ 968.244] (**) Power Button: always reports core events
[ 968.244] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 968.245] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 968.245] (--) evdev: Power Button: Found keys
[ 968.245] (II) evdev: Power Button: Configuring as keyboard
[ 968.245] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 968.245] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 968.245] (**) Option "xkb_rules" "evdev"
[ 968.245] (**) Option "xkb_model" "evdev"
[ 968.245] (**) Option "xkb_layout" "us"
[ 968.332] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 968.332] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 968.332] (II) Using input driver 'evdev' for 'Video Bus'
[ 968.332] (**) Video Bus: always reports core events
[ 968.332] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 968.332] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 968.332] (--) evdev: Video Bus: Found keys
[ 968.332] (II) evdev: Video Bus: Configuring as keyboard
[ 968.332] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[ 968.332] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 968.332] (**) Option "xkb_rules" "evdev"
[ 968.332] (**) Option "xkb_model" "evdev"
[ 968.333] (**) Option "xkb_layout" "us"
[ 968.334] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 968.334] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 968.334] (II) Using input driver 'evdev' for 'Video Bus'
[ 968.334] (**) Video Bus: always reports core events
[ 968.334] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 968.335] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 968.335] (--) evdev: Video Bus: Found keys
[ 968.335] (II) evdev: Video Bus: Configuring as keyboard
[ 968.335] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:50/LNXVIDEO:01/input/input7/event6"
[ 968.335] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 968.335] (**) Option "xkb_rules" "evdev"
[ 968.335] (**) Option "xkb_model" "evdev"
[ 968.335] (**) Option "xkb_layout" "us"
[ 968.336] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 968.337] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 968.337] (II) Using input driver 'evdev' for 'Power Button'
[ 968.337] (**) Power Button: always reports core events
[ 968.337] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 968.337] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 968.337] (--) evdev: Power Button: Found keys
[ 968.337] (II) evdev: Power Button: Configuring as keyboard
[ 968.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 968.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 968.337] (**) Option "xkb_rules" "evdev"
[ 968.337] (**) Option "xkb_model" "evdev"
[ 968.337] (**) Option "xkb_layout" "us"
[ 968.339] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 968.339] (II) No input driver specified, ignoring this device.
[ 968.339] (II) This device may have been added with another device file.
[ 968.339] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 968.340] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 968.340] (II) Using input driver 'evdev' for 'Sleep Button'
[ 968.340] (**) Sleep Button: always reports core events
[ 968.340] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 968.340] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 968.340] (--) evdev: Sleep Button: Found keys
[ 968.340] (II) evdev: Sleep Button: Configuring as keyboard
[ 968.340] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event3"
[ 968.340] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 968.340] (**) Option "xkb_rules" "evdev"
[ 968.340] (**) Option "xkb_model" "evdev"
[ 968.340] (**) Option "xkb_layout" "us"
[ 968.341] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 968.343] (II) config/udev: Adding input device 2.4G Wireless Mouse (/dev/input/event9)
[ 968.343] (**) 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 968.343] (II) Using input driver 'evdev' for '2.4G Wireless Mouse'
[ 968.343] (**) 2.4G Wireless Mouse: always reports core events
[ 968.343] (**) evdev: 2.4G Wireless Mouse: Device: "/dev/input/event9"
[ 968.343] (--) evdev: 2.4G Wireless Mouse: Vendor 0x4f3 Product 0x601
[ 968.343] (--) evdev: 2.4G Wireless Mouse: Found 9 mouse buttons
[ 968.343] (--) evdev: 2.4G Wireless Mouse: Found scroll wheel(s)
[ 968.343] (--) evdev: 2.4G Wireless Mouse: Found relative axes
[ 968.343] (--) evdev: 2.4G Wireless Mouse: Found x and y relative axes
[ 968.343] (II) evdev: 2.4G Wireless Mouse: Configuring as mouse
[ 968.343] (II) evdev: 2.4G Wireless Mouse: Adding scrollwheel support
[ 968.343] (**) evdev: 2.4G Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 968.343] (**) evdev: 2.4G Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 968.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0/0003:04F3:0601.0001/input/input11/event9"
[ 968.343] (II) XINPUT: Adding extended input device "2.4G Wireless Mouse" (type: MOUSE, id 11)
[ 968.344] (II) evdev: 2.4G Wireless Mouse: initialized for relative axes.
[ 968.344] (**) 2.4G Wireless Mouse: (accel) keeping acceleration scheme 1
[ 968.344] (**) 2.4G Wireless Mouse: (accel) acceleration profile 0
[ 968.344] (**) 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[ 968.345] (**) 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[ 968.345] (II) config/udev: Adding input device 2.4G Wireless Mouse (/dev/input/mouse0)
[ 968.345] (II) No input driver specified, ignoring this device.
[ 968.346] (II) This device may have been added with another device file.
[ 968.346] (II) config/udev: Adding input device USB2.0 0.3M UVC WebCam (/dev/input/event8)
[ 968.346] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 968.346] (II) Using input driver 'evdev' for 'USB2.0 0.3M UVC WebCam'
[ 968.347] (**) USB2.0 0.3M UVC WebCam: always reports core events
[ 968.347] (**) evdev: USB2.0 0.3M UVC WebCam: Device: "/dev/input/event8"
[ 968.347] (--) evdev: USB2.0 0.3M UVC WebCam: Vendor 0x4f2 Product 0xb26f
[ 968.347] (--) evdev: USB2.0 0.3M UVC WebCam: Found keys
[ 968.347] (II) evdev: USB2.0 0.3M UVC WebCam: Configuring as keyboard
[ 968.347] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input10/event8"
[ 968.347] (II) XINPUT: Adding extended input device "USB2.0 0.3M UVC WebCam" (type: KEYBOARD, id 12)
[ 968.347] (**) Option "xkb_rules" "evdev"
[ 968.347] (**) Option "xkb_model" "evdev"
[ 968.347] (**) Option "xkb_layout" "us"
[ 968.349] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 968.349] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 968.349] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 968.349] (**) Eee PC WMI hotkeys: always reports core events
[ 968.349] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 968.349] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 968.349] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 968.349] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 968.349] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event7"
[ 968.349] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[ 968.349] (**) Option "xkb_rules" "evdev"
[ 968.349] (**) Option "xkb_model" "evdev"
[ 968.349] (**) Option "xkb_layout" "us"
[ 968.351] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 968.351] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 968.351] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 968.351] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 968.351] (**) AT Translated Set 2 keyboard: always reports core events
[ 968.351] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 968.351] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 968.351] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 968.352] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 968.352] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 968.352] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 968.352] (**) Option "xkb_rules" "evdev"
[ 968.352] (**) Option "xkb_model" "evdev"
[ 968.352] (**) Option "xkb_layout" "us"
[ 968.353] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 968.354] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 968.354] (II) LoadModule: "synaptics"
[ 968.354] (II) Loading /usr/lib64/X11/modules/input/synaptics_drv.so
[ 968.355] (II) Module synaptics: vendor="X.Org Foundation"
[ 968.355] compiled for 1.14.5, module version = 1.7.3
[ 968.355] Module class: X.Org XInput Driver
[ 968.355] ABI class: X.Org XInput driver, version 19.1
[ 968.355] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 968.355] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 968.355] (**) Option "Device" "/dev/input/event10"
[ 968.388] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1216 (res 0)
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 512 (res 0)
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 968.388] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 968.388] (**) Option "ClickTime" "100"
[ 968.388] (**) Option "TapButton1" "1"
[ 968.389] (**) Option "ClickFinger1" "1"
[ 968.389] (**) Option "ClickFinger2" "1"
[ 968.389] (**) Option "ClickFinger3" "1"
[ 968.389] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 968.389] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 968.406] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event10"
[ 968.406] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 968.406] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 968.406] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 968.406] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.152
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 968.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 968.407] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 968.408] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 968.408] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 975.842] (II) RADEON(0): EDID vendor "IVO", prod id 1012
[ 975.842] (II) RADEON(0): Printing DDC gathered Modelines:
[ 975.842] (II) RADEON(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 979.505] (II) RADEON(0): EDID vendor "IVO", prod id 1012
[ 979.505] (II) RADEON(0): Printing DDC gathered Modelines:
[ 979.505] (II) RADEON(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-10 17:33 ` Kharitonov A. Dmitry
2015-04-10 17:48 ` Kharitonov A. Dmitry
@ 2015-04-10 18:29 ` Kharitonov A. Dmitry
2015-04-11 3:48 ` Kharitonov A. Dmitry
1 sibling, 1 reply; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-10 18:29 UTC (permalink / raw)
To: ALT Linux Community general discussions
10.04.2015 20:33, Kharitonov A. Dmitry пишет:
> 10.04.2015 16:28, Sergey V Turchin пишет:
>> On Friday 10 April 2015 11:43:08 Kharitonov A wrote:
>>> При старте KDE отваливается тачпад.
>>>
>>> В окне ввода пароля тачпад работает. В процессе загрузки KDE перестаёт
>>> работать.
>>> При завершении сеанса KDE появляется окно вода пароля там опять
>>> работает.
>> Видимо, запуск
>> /usr/share/kde4/autostart/synaptiks_*.desktop
>> влияет. synaptiks настраивали?
> Не настраивал.
> На запуск вручную появляется меню настройки.
> Но настройка ни к чему не приводит.
по совету http://ubuntuforums.org/showthread.php?t=2189117
sudo modprobe -r psmouse
sudo modprobe psmouse
Помогает, но создание
user@eee2 ~ 21:21:17> cat /etc/pm/sleep.d/65fixtouchpad
#!/bin/sh
#
# 65fixtouchpad: unload/reload psmouse module
case "$1" in
hibernate|suspend)
modprobe -r psmouse
;;
thaw|resume)
modprobe psmouse
;;
*) exit $NA
;;
esac
эффекта не даёт
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-10 18:29 ` Kharitonov A. Dmitry
@ 2015-04-11 3:48 ` Kharitonov A. Dmitry
2015-04-11 7:00 ` Vasiliy D. Sevostyanov
0 siblings, 1 reply; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-11 3:48 UTC (permalink / raw)
To: ALT Linux Community general discussions
10.04.2015 21:29, Kharitonov A. Dmitry пишет:
> 10.04.2015 20:33, Kharitonov A. Dmitry пишет:
>> 10.04.2015 16:28, Sergey V Turchin пишет:
>>> On Friday 10 April 2015 11:43:08 Kharitonov A wrote:
>>>> При старте KDE отваливается тачпад.
>>>>
>>>> В окне ввода пароля тачпад работает. В процессе загрузки KDE перестаёт
>>>> работать.
>>>> При завершении сеанса KDE появляется окно вода пароля там опять
>>>> работает.
>>> Видимо, запуск
>>> /usr/share/kde4/autostart/synaptiks_*.desktop
>>> влияет. synaptiks настраивали?
>> Не настраивал.
>> На запуск вручную появляется меню настройки.
>> Но настройка ни к чему не приводит.
>
> по совету http://ubuntuforums.org/showthread.php?t=2189117
> sudo modprobe -r psmouse
> sudo modprobe psmouse
>
> Помогает
Как это автоматизировать?
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-11 3:48 ` Kharitonov A. Dmitry
@ 2015-04-11 7:00 ` Vasiliy D. Sevostyanov
2015-04-11 8:25 ` Kharitonov A. Dmitry
0 siblings, 1 reply; 11+ messages in thread
From: Vasiliy D. Sevostyanov @ 2015-04-11 7:00 UTC (permalink / raw)
To: ALT Linux Community general discussions
Hi, you wrote 06:48 Sat 11 Apr :
> 10.04.2015 21:29, Kharitonov A. Dmitry пишет:
> >10.04.2015 20:33, Kharitonov A. Dmitry пишет:
> >по совету http://ubuntuforums.org/showthread.php?t=2189117
> >sudo modprobe -r psmouse
> >sudo modprobe psmouse
> >
> >Помогает
> Как это автоматизировать?
В кедах есть автозапуск:
Параметры KDE4 > Системное администрирование > Запуск и завершение > Автозапуск > Добавить скрипт
Или просто кинуть исполняемый скрипт в ~/.kde4/Autostart .
А просто Fn+F9 не срабатывает при запуске KDE ? Потому что у меня synclient
на это не реагирует, постоянно показывает TouchpadOff=0 .
Попробуйте снять дамп с `synclient -l > /tmp/con` до запуска иксов и
сравнить с тем, что под графикой. Может, поля съезжают за пределы
железа...
>>Система видит тачпал, но почему-то
>>[ 968.408] (**) ETPS/2 Elantech Touchpad: Ignoring device from
>>InputClass "touchpad ignore duplicates"
Это нормально, не все функции драйвера поддерживаются железом. У меня то
же самое слово в слово.
--
С уважением, Василий Д. Севостьянов.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-11 7:00 ` Vasiliy D. Sevostyanov
@ 2015-04-11 8:25 ` Kharitonov A. Dmitry
2015-04-11 9:39 ` Vasiliy D. Sevostyanov
0 siblings, 1 reply; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-11 8:25 UTC (permalink / raw)
To: ALT Linux Community general discussions
[-- Attachment #1: Type: text/plain, Size: 2394 bytes --]
>> Как это автоматизировать?
> В кедах есть автозапуск:
> Параметры KDE4 > Системное администрирование > Запуск и завершение > Автозапуск > Добавить скрипт
> Или просто кинуть исполняемый скрипт в ~/.kde4/Autostart .
Правильнее $(kde4-config --localprefix)/Autostart
Да есть. Но запускать нужно из под rootа.
Автозапуск из под rootа почему-то не работает.
Можно sudo с nopasswd натравить, но должны же существовать какие-то
гуманные методы
>
> А просто Fn+F9 не срабатывает при запуске KDE ? Потому что у меня synclient
> на это не реагирует, постоянно показывает TouchpadOff=0 .
Не работает
>
> Попробуйте снять дамп с `synclient -l > /tmp/con` до запуска иксов и
> сравнить с тем, что под графикой. Может, поля съезжают за пределы
> железа...
На мой взгляд всё в порядке. Может я ошибаюсь?
user@eee2 ~ 11:08:38> cat ~/synclient_without_KDE.log
Failed to connect to X Server.
user@eee2 ~ 11:09:05> diff -u ~/synclient_with_KDE.log
~/synclient_after_modprobe.log
--- /home/user/synclient_with_KDE.log 2015-04-11 10:58:11.947026504 +0300
+++ /home/user/synclient_after_modprobe.log 2015-04-11
11:05:07.066853934 +0300
@@ -15,14 +15,14 @@
EmulateTwoFingerMinW = 7
VertScrollDelta = 26
HorizScrollDelta = 26
- VertEdgeScroll = 1
- HorizEdgeScroll = 1
- CornerCoasting = 1
+ VertEdgeScroll = 0
+ HorizEdgeScroll = 0
+ CornerCoasting = 0
VertTwoFingerScroll = 1
- HorizTwoFingerScroll = 1
+ HorizTwoFingerScroll = 0
MinSpeed = 1
MaxSpeed = 1.75
- AccelFactor = 0.1516
+ AccelFactor = 0.15163
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
@@ -30,14 +30,14 @@
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
- TapButton1 = 0
+ TapButton1 = 1
TapButton2 = 0
TapButton3 = 0
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
- CircScrollDelta = 0.100007
+ CircScrollDelta = 0.1
CircScrollTrigger = 0
PalmDetect = 0
PalmMinWidth = 10
user@eee2 ~ 11:10:00>
[-- Attachment #2: synclient_after_modprobe.log --]
[-- Type: text/x-log, Size: 1919 bytes --]
Parameter settings:
LeftEdge = 48
RightEdge = 1168
TopEdge = 27
BottomEdge = 485
FingerLow = 1
FingerHigh = 1
MaxTapTime = 180
MaxTapMove = 58
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 26
HorizScrollDelta = 26
VertEdgeScroll = 0
HorizEdgeScroll = 0
CornerCoasting = 0
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 0
MinSpeed = 1
MaxSpeed = 1.75
AccelFactor = 0.15163
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 0
TapButton3 = 0
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 1
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 6
VertHysteresis = 6
ClickPad = 0
[-- Attachment #3: synclient_with_KDE.log --]
[-- Type: text/x-log, Size: 1923 bytes --]
Parameter settings:
LeftEdge = 48
RightEdge = 1168
TopEdge = 27
BottomEdge = 485
FingerLow = 1
FingerHigh = 1
MaxTapTime = 180
MaxTapMove = 58
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 26
HorizScrollDelta = 26
VertEdgeScroll = 1
HorizEdgeScroll = 1
CornerCoasting = 1
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 1
MinSpeed = 1
MaxSpeed = 1.75
AccelFactor = 0.1516
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 0
TapButton2 = 0
TapButton3 = 0
ClickFinger1 = 1
ClickFinger2 = 1
ClickFinger3 = 1
CircularScrolling = 0
CircScrollDelta = 0.100007
CircScrollTrigger = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 1
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 6
VertHysteresis = 6
ClickPad = 0
[-- Attachment #4: synclient_without_KDE.log --]
[-- Type: text/x-log, Size: 31 bytes --]
Failed to connect to X Server.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-11 8:25 ` Kharitonov A. Dmitry
@ 2015-04-11 9:39 ` Vasiliy D. Sevostyanov
2015-04-11 11:24 ` Kharitonov A. Dmitry
0 siblings, 1 reply; 11+ messages in thread
From: Vasiliy D. Sevostyanov @ 2015-04-11 9:39 UTC (permalink / raw)
To: ALT Linux Community general discussions
Hi, you wrote 11:25 Sat 11 Apr :
> Правильнее $(kde4-config --localprefix)/Autostart
> Да есть. Но запускать нужно из под rootа.
> Автозапуск из под rootа почему-то не
> работает.
> Можно sudo с nopasswd натравить, но должны же
> существовать какие-то гуманные методы
Может и не быть. Все-таки от рута юзер запускать не должен ничего,
соответственно и лазеек в системе может не быть кроме sudo.
> На мой взгляд всё в порядке. Может я
> ошибаюсь?
> user@eee2 ~ 11:08:38> cat ~/synclient_without_KDE.log
> Failed to connect to X Server.
Я имел в виду в момент ввода пароля для входа в графику (иксы уже будут
работать, а кеды ещё нет)
> user@eee2 ~ 11:09:05> diff -u ~/synclient_with_KDE.log
> ~/synclient_after_modprobe.log
..кусь..
> - TapButton1 = 0
> + TapButton1 = 1
Это назначение клика одним пальцем на ЛКМ. На движение курсора не должно
влиять...
..кусь..
Всё остальное как будто в норме.
Собственно говоря, мышиные драйвера касаться тачпада не должны. Тот же
psmouse после 2.6.34 уступил synaptics'у, у него даже опцию force_elantech
убрали... Вы не пробовали его заблеклистить? Такое впечатление, что он
захватывает тачпад и потом они вдвоем его не поделят, пока один не уйдёт.
Или просто попробовать тач после 'modprode -r psmouse', но до 'modprobe psmouse'.
--
С уважением, Василий Д. Севостьянов.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-11 9:39 ` Vasiliy D. Sevostyanov
@ 2015-04-11 11:24 ` Kharitonov A. Dmitry
0 siblings, 0 replies; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-11 11:24 UTC (permalink / raw)
To: ALT Linux Community general discussions
11.04.2015 12:39, Vasiliy D. Sevostyanov пишет:
> Hi, you wrote 11:25 Sat 11 Apr :
>> Правильнее $(kde4-config --localprefix)/Autostart
>> Да есть. Но запускать нужно из под rootа.
>> Автозапуск из под rootа почему-то не
>> работает.
>> Можно sudo с nopasswd натравить, но должны же
>> существовать какие-то гуманные методы
> Может и не быть. Все-таки от рута юзер запускать не должен ничего,
> соответственно и лазеек в системе может не быть кроме sudo.
Это как-то должно регулироваться через dbus
>
>> На мой взгляд всё в порядке. Может я
>> ошибаюсь?
>> user@eee2 ~ 11:08:38> cat ~/synclient_without_KDE.log
>> Failed to connect to X Server.
> Я имел в виду в момент ввода пароля для входа в графику (иксы уже будут
> работать, а кеды ещё нет)
Это именно этот момент. Демон synaptic ещё не запущен.
>> user@eee2 ~ 11:09:05> diff -u ~/synclient_with_KDE.log
>> ~/synclient_after_modprobe.log
> ..кусь..
>> - TapButton1 = 0
>> + TapButton1 = 1
> Это назначение клика одним пальцем на ЛКМ. На движение курсора не должно
> влиять...
> ..кусь..
> Всё остальное как будто в норме.
>
> Собственно говоря, мышиные драйвера касаться тачпада не должны. Тот же
> psmouse после 2.6.34 уступил synaptics'у, у него даже опцию force_elantech
> убрали... Вы не пробовали его заблеклистить? Такое впечатление, что он
> захватывает тачпад и потом они вдвоем его не поделят, пока один не уйдёт.
> Или просто попробовать тач после 'modprode -r psmouse', но до 'modprobe psmouse'.
Тем не менее без modprobe psmouse не работает
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] При старте KDE отваливается тачпад
2015-04-10 8:43 [Comm] При старте KDE отваливается тачпад Kharitonov A. Dmitry
2015-04-10 13:28 ` Sergey V Turchin
@ 2015-04-11 18:39 ` Kharitonov A. Dmitry
1 sibling, 0 replies; 11+ messages in thread
From: Kharitonov A. Dmitry @ 2015-04-11 18:39 UTC (permalink / raw)
To: community
10.04.2015 11:43, Kharitonov A. Dmitry пишет:
> При старте KDE отваливается тачпад.
>
> В окне ввода пароля тачпад работает. В процессе загрузки KDE перестаёт
> работать.
> При завершении сеанса KDE появляется окно вода пароля там опять работает.
>
> Помогите советами.
>
Кому интересно, скрипт выполняющий автонастройку для временного
исправления положения
#!/bin/bash
fixtouchpad_file="/etc/sudoers.d/fixtouchpad"
tfile="$(mktemp ~/XXXXXX)"
echo "User_Alias USERS = %users" >"$tfile"
echo "USERS ALL=NOPASSWD: /sbin/modprobe -r psmouse,/sbin/modprobe
psmouse" >>"$tfile"
echo "" >>"$tfile"
sudo install --mode=400 --owner=root --group=root -pv "$tfile"
"$fixtouchpad_file"
fixtouchpad_file="/etc/pm/sleep.d/65-fixtouchpad"
echo "#!/bin/sh" >"$tfile"
echo "#" >>"$tfile"
echo "# fixtouchpad: unload/reload psmouse module" >>"$tfile"
echo "" >>"$tfile"
echo "sudo /sbin/modprobe -r psmouse" >>"$tfile"
echo "sudo /sbin/modprobe psmouse" >>"$tfile"
echo "" >>"$tfile"
sudo install --mode=555 --owner=root --group=root -pv "$tfile"
"$fixtouchpad_file"
sudo rm "$tfile"
tfile="$(kde4-config --prefix)/autostart/${fixtouchpad_file##*/}"
sudo ln -s "$fixtouchpad_file" "$tfile"
sudo chmod a-rwx+rX,u+w "$tfile"
sudo owner root:root "$tfile"
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2015-04-11 18:39 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-10 8:43 [Comm] При старте KDE отваливается тачпад Kharitonov A. Dmitry
2015-04-10 13:28 ` Sergey V Turchin
2015-04-10 17:33 ` Kharitonov A. Dmitry
2015-04-10 17:48 ` Kharitonov A. Dmitry
2015-04-10 18:29 ` Kharitonov A. Dmitry
2015-04-11 3:48 ` Kharitonov A. Dmitry
2015-04-11 7:00 ` Vasiliy D. Sevostyanov
2015-04-11 8:25 ` Kharitonov A. Dmitry
2015-04-11 9:39 ` Vasiliy D. Sevostyanov
2015-04-11 11:24 ` Kharitonov A. Dmitry
2015-04-11 18:39 ` Kharitonov A. Dmitry
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git