Linux version 2.6.27-desktop-0.rc8.2mnb (pterjan@klodia.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Oct 2 05:49:37 EDT 2008 Command line: BOOT_IMAGE=linux root=UUID=36b13f94-b34d-11e2-88bd-c3581079cb6c resume=UUID=397bb72c-b34d-11e2-81f3-81a02c7f6009 splash=silent vga=788 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037fb0000 (usable) BIOS-e820: 0000000037fb0000 - 0000000037fc0000 (ACPI data) BIOS-e820: 0000000037fc0000 - 0000000037ff0000 (ACPI NVS) BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) last_pfn = 0x37fb0 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 0037e00000 page 2M 0037e00000 - 0037fb0000 page 4k kernel direct mapping tables up to 37fb0000 @ 8000-b000 last_map_addr: 37fb0000 end: 37fb0000 RAMDISK: 37bed000 - 37f9f3d7 DMI present. ACPI: RSDP 000FA4F0, 0014 (r0 ACPIAM) ACPI: RSDT 37FB0000, 0044 (r1 A_M_I OEMRSDT 3001109 MSFT 97) ACPI: FACP 37FB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT 97) ACPI: DSDT 37FB0460, 494B (r1 AS359 AS359142 142 INTL 20051117) ACPI: FACS 37FC0000, 0040 ACPI: APIC 37FB0390, 0090 (r1 A_M_I OEMAPIC 3001109 MSFT 97) ACPI: MCFG 37FB0420, 003C (r1 A_M_I OEMMCFG 3001109 MSFT 97) ACPI: OEMB 37FC0040, 0061 (r1 A_M_I AMI_OEM 3001109 MSFT 97) ACPI: SRAT 37FB4DB0, 0090 (r3 AMD FAM_F_10 2 AMD 1) ACPI: MSCT 37FB4E40, 004E (r1 A M I OEMBOARD 1 AMD 1) ACPI: AAFT 37FB4E90, 0027 (r1 A_M_I OEMAAFT 3001109 MSFT 97) ACPI: SSDT 37FB4EC0, 023E (r1 A M I POWERNOW 1 AMD 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-40000000 NUMA: Allocated memnodemap from 9000 - 9880 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000037fb0000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [000000000000a000 - 0000000000010ff7] pages 7 (7 early reservations) ==> bootmem [0000000000 - 0037fb0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00007f194c] TEXT DATA BSS ==> [0000200000 - 00007f194c] #3 [0037bed000 - 0037f9f3d7] RAMDISK ==> [0037bed000 - 0037f9f3d7] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] #6 [0000009000 - 0000009880] MEMNODEMAP ==> [0000009000 - 0000009880] found SMP MP-table at [ffff8800000ff780] 000ff780 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00037fb0 On node 0 totalpages: 229199 DMA zone: 2320 pages, LIFO batch:0 DMA32 zone: 222121 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x508 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information SMP: Allowing 6 CPUs, 5 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000 PM: Registered nosave memory: 00000000000e7000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000) PERCPU: Allocating 51744 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 6, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 224441 Policy zone: DMA32 Kernel command line: BOOT_IMAGE=linux root=UUID=36b13f94-b34d-11e2-88bd-c3581079cb6c resume=UUID=397bb72c-b34d-11e2-81f3-81a02c7f6009 splash=silent vga=788 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PMTIMER calibration value Detected 2812.784 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ 8300000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 892124k/917184k available (3077k kernel code, 24672k reserved, 1558k data, 540k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.56 BogoMIPS (lpj=2812780) Security Framework initialized AppArmor: AppArmor disabled by boottime parameter Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Hook version: 2.6.27-2.3 2008/08/29 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 0000000000 using C1E aware idle routine Early unpacking initramfs... done Freeing initrd memory: 3784k freed ACPI: Core revision 20080609 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Sempron(tm) 145 Processor stepping 03 Using local APIC timer interrupts. APIC timer calibration result 12557051 Detected 12.557 MHz APIC timer. Brought up 1 CPUs Total of 1 processors activated (5625.56 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level NODE groups: 0 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000040000000 aka 1024M Fam 10h mmconf [fc000000, fdffffff] node 0 link 0: mmio [fc000000, fdffffff] ==> none node 0 link 0: mmio [40000000, fbffffff] node 0 link 0: mmio [fe000000, fe0bffff] node 0 link 0: mmio [a0000, bffff] bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [40000000, fbffffff] bus: 00 index 2 mmio: [fe000000, fcffffffff] bus: 00 index 3 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 PCI: MCFG area at fc000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at fc000000 - fdffffff ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:01.0 reg 10 io port: [900, 9ff] PCI: 0000:00:01.1 reg 10 io port: [dc00, dc3f] PCI: 0000:00:01.1 reg 20 io port: [600, 63f] PCI: 0000:00:01.1 reg 24 io port: [700, 73f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [fbfff000, fbffffff] pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled PCI: 0000:00:02.1 reg 10 32bit mmio: [fbffec00, fbffecff] pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled PCI: 0000:00:05.0 reg 10 32bit mmio: [fbff8000, fbffbfff] pci 0000:00:05.0: PME# supported from D3hot D3cold pci 0000:00:05.0: PME# disabled PCI: 0000:00:06.0 reg 20 io port: [ffa0, ffaf] PCI: 0000:00:07.0 reg 10 32bit mmio: [fbffd000, fbffdfff] PCI: 0000:00:07.0 reg 14 io port: [d480, d487] pci 0000:00:07.0: supports D1 pci 0000:00:07.0: supports D2 pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:07.0: PME# disabled PCI: 0000:00:08.0 reg 10 io port: [d400, d407] PCI: 0000:00:08.0 reg 14 io port: [d080, d083] PCI: 0000:00:08.0 reg 18 io port: [d000, d007] PCI: 0000:00:08.0 reg 1c io port: [cc00, cc03] PCI: 0000:00:08.0 reg 20 io port: [c880, c88f] PCI: 0000:00:08.0 reg 24 32bit mmio: [fbffc000, fbffcfff] PCI: 0000:00:08.1 reg 10 io port: [c800, c807] PCI: 0000:00:08.1 reg 14 io port: [c480, c483] PCI: 0000:00:08.1 reg 18 io port: [c400, c407] PCI: 0000:00:08.1 reg 1c io port: [c080, c083] PCI: 0000:00:08.1 reg 20 io port: [c000, c00f] PCI: 0000:00:08.1 reg 24 32bit mmio: [fbff7000, fbff7fff] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled PCI: 0000:00:0d.0 reg 10 32bit mmio: [fa000000, faffffff] PCI: 0000:00:0d.0 reg 14 32bit mmio: [e0000000, efffffff] PCI: 0000:00:0d.0 reg 1c 64bit mmio: [f9000000, f9ffffff] PCI: 0000:00:0d.0 reg 30 32bit mmio: [fbfc0000, fbfdffff] PCI: 0000:01:0a.0 reg 10 io port: [ec00, ec07] PCI: 0000:01:0a.0 reg 14 io port: [e880, e887] PCI: 0000:01:0a.0 reg 18 io port: [e800, e807] PCI: 0000:01:0a.0 reg 1c io port: [e480, e487] PCI: 0000:01:0a.0 reg 20 io port: [e400, e407] PCI: 0000:01:0a.0 reg 24 io port: [e080, e08f] pci 0000:00:04.0: transparent bridge PCI: bridge 0000:00:04.0 io port: [e000, efff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 12, should be 11 [20080609] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:parse DMAR table failure. ACPI: RTC can wake from S4 system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0x500-0x57f has been reserved system 00:05: ioport range 0x580-0x5ff has been reserved system 00:05: ioport range 0x800-0x87f has been reserved system 00:05: ioport range 0x880-0x8ff has been reserved system 00:05: ioport range 0xd00-0xd7f has been reserved system 00:05: ioport range 0xd80-0xdff has been reserved system 00:05: ioport range 0x1100-0x117f has been reserved system 00:05: ioport range 0x1180-0x11ff has been reserved system 00:05: iomem range 0xfec80000-0x1fd93ffff could not be reserved system 00:05: iomem range 0xfefe0000-0xfefe01ff has been reserved system 00:05: iomem range 0xfefe1000-0xfefe1fff has been reserved system 00:05: iomem range 0xfee01000-0xfeefffff could not be reserved system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:09: ioport range 0x280-0x28f has been reserved system 00:09: ioport range 0x290-0x29f has been reserved system 00:0a: iomem range 0xfc000000-0xfdffffff has been reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0xc0000-0xcffff has been reserved system 00:0b: iomem range 0xe0000-0xfffff could not be reserved system 00:0b: iomem range 0x100000-0x3fffffff could not be reserved system 00:0b: iomem range 0xff380000-0xffffffff could not be reserved pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 pci 0000:00:04.0: IO window: 0xe000-0xefff pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 pci 0000:00:09.0: IO window: disabled pci 0000:00:09.0: MEM window: disabled pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: disabled pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [e000, efff] bus: 01 index 1 mmio: [0, 0] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 io port: [0, ffff] bus: 01 index 4 mmio: [0, ffffffffffffffff] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [0, 0] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [0, 0] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1368550534.162:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1749 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:04.0: Enabling HT MSI Mapping pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:07.0: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:08.1: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Boot video device pcieport-driver 0000:00:09.0: setting latency timer to 64 pcieport-driver 0000:00:09.0: found MSI capability pci_express 0000:00:09.0:pcie00: allocate port service pci_express 0000:00:09.0:pcie03: allocate port service pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service pci_express 0000:00:0b.0:pcie03: allocate port service pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service pci_express 0000:00:0c.0:pcie03: allocate port service vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20002580000, using 1875k, total 131072k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 540k freed input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbffec00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected Switched to high resolution mode on CPU 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-desktop-0.rc8.2mnb ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbfff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-desktop-0.rc8.2mnb ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. sata_nv 0000:00:08.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:08.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21 ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21 usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=0c2e, idProduct=0200 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Honeywell Scanning and Mobility Scanner usb 2-1: Manufacturer: Honeywell Scanning and Mobility usb 2-3: new low speed USB device using ohci_hcd and address 3 usb 2-3: configuration #1 chosen from 1 choice usb 2-3: New USB device found, idVendor=15d9, idProduct=0a4c usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 2-3: Product: USB OPTICAL MOUSE ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-8: ST3160316AS, JC4B, max UDMA/133 ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 1:0:0:0: Direct-Access ATA ST3160316AS JC4B PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 > sd 1:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:08.1: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20 ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20 pata_amd 0000:00:06.0: version 0.3.10 pata_amd 0000:00:06.0: setting latency timer to 64 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata6: port disabled. ignoring. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. TomoyoLinux Mandatory Access Control disabled by default. You need to install ccs-tools if you want to enable it. sd 1:0:0:0: Attached scsi generic sg0 type 0 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 forcedeth 0000:00:07.0: setting latency timer to 64 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:db:c6:b4 forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 parport_serial 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 parport0: PC-style at 0xe800 [PCSPP,TRISTATE,EPP] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 processor ACPI0007:00: registered as cooling_device0 input: Power Button (FF) as /class/input/input2 usbcore: registered new interface driver hiddev ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 input: Honeywell Scanning and Mobility Honeywell Scanning and Mobility Scanner as /class/input/input4 ACPI: Power Button (CM) [PWRB] 0000:01:0a.0: ttyS1 at I/O 0xec00 (irq = 19) is a 16550A 0000:01:0a.0: ttyS2 at I/O 0xe880 (irq = 19) is a 16550A input,hidraw0: USB HID v1.11 Keyboard [Honeywell Scanning and Mobility Honeywell Scanning and Mobility Scanner] on usb-0000:00:02.0-1 input: USB OPTICAL MOUSE as /class/input/input5 input,hidraw1: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-3 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ppdev: user-space parallel port driver ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:05.0: setting latency timer to 64 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) loop: module loaded Adding 4089920k swap on /dev/sda6. Priority:-1 extents:1 across:4089920k hda_codec: num_steps = 0 for NID=0x1a (ctl = Mic Boost) NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no link during initialization. ADDRCONF(NETDEV_UP): eth0: link is not ready