* Re: [Comm] hp1020 & p6 @ 2011-05-31 20:55 ` Michael Shigorin 2011-06-01 5:37 ` Evgeny 0 siblings, 1 reply; 4+ messages in thread From: Michael Shigorin @ 2011-05-31 20:55 UTC (permalink / raw) To: community On Mon, May 30, 2011 at 09:16:16PM +0600, Ринат Шигапов wrote: > Скачал firmware с помощью foo2zjs-fwdownloader, проверил > наличие /etc/udev/rules.d/11-hplj10xx.rules. В cups добавил > usb-принтер. После включения принтера firmware в него не > загружается, в /var/log/messages подозрительно выскакивает > следующее сообщение: > > udevd[27707]: kernel-provided name 'bus/usb/001/006' and NAME= > 'usb/1-1' disagree, please use SYMLINK+= or change the kernel > to provide the proper name Я бы вешал багу с указанием этих фактов на foo2zjs в Sisyphus. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] hp1020 & p6 2011-05-31 20:55 ` [Comm] hp1020 & p6 Michael Shigorin @ 2011-06-01 5:37 ` Evgeny 2011-06-01 15:12 ` Rinat Shigapov 0 siblings, 1 reply; 4+ messages in thread From: Evgeny @ 2011-06-01 5:37 UTC (permalink / raw) To: shigorin, ALT Linux Community general discussions 01.06.2011 00:55, Michael Shigorin пишет: > On Mon, May 30, 2011 at 09:16:16PM +0600, Ринат Шигапов wrote: >> Скачал firmware с помощью foo2zjs-fwdownloader, проверил >> наличие /etc/udev/rules.d/11-hplj10xx.rules. В cups добавил >> usb-принтер. После включения принтера firmware в него не >> загружается, в /var/log/messages подозрительно выскакивает >> следующее сообщение: >> >> udevd[27707]: kernel-provided name 'bus/usb/001/006' and NAME= >> 'usb/1-1' disagree, please use SYMLINK+= or change the kernel >> to provide the proper name > > Я бы вешал багу с указанием этих фактов на foo2zjs в Sisyphus. > Решил разобраться. Система - сегодняшний сизиф. Подключил принтер hp1018. Прошивка в него загрузилась. Cups его не видит (localhost:631), что загружай usblp, что не загружай. Естественно, всё, что я вносил в конфиги связанное с usblp я удалял. Может кто ещё проверить - видит cups принтер (hp 1018/1020...) или нет? ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] hp1020 & p6 2011-06-01 5:37 ` Evgeny @ 2011-06-01 15:12 ` Rinat Shigapov 2011-06-01 16:19 ` Евгений 0 siblings, 1 reply; 4+ messages in thread From: Rinat Shigapov @ 2011-06-01 15:12 UTC (permalink / raw) To: evgeny, ALT Linux Community general discussions > > Решил разобраться. > Система - сегодняшний сизиф. > Подключил принтер hp1018. Прошивка в него загрузилась. > Cups его не видит (localhost:631), что загружай usblp, что не загружай. > Естественно, всё, что я вносил в конфиги связанное с usblp я удалял. > Может кто ещё проверить - видит cups принтер (hp 1018/1020...) или нет? > У меня после загрузки usblp прошивка загружалась и cups видел принтер. -- С уважением, Ринат Шигапов ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] hp1020 & p6 2011-06-01 15:12 ` Rinat Shigapov @ 2011-06-01 16:19 ` Евгений 0 siblings, 0 replies; 4+ messages in thread From: Евгений @ 2011-06-01 16:19 UTC (permalink / raw) To: ALT Linux Community general discussions 01.06.2011 19:12, Rinat Shigapov пишет: > >> >> Решил разобраться. >> Система - сегодняшний сизиф. >> Подключил принтер hp1018. Прошивка в него загрузилась. >> Cups его не видит (localhost:631), что загружай usblp, что не загружай. >> Естественно, всё, что я вносил в конфиги связанное с usblp я удалял. >> Может кто ещё проверить - видит cups принтер (hp 1018/1020...) или нет? >> > > У меня после загрузки usblp прошивка загружалась и cups видел принтер. > usblp должен загружать скрипт из foo2zjs, о после загрузки прошивки в принтер - выгружать модуль. Сегодня проверил работу на HP1018 - отлично всё отрабатывается. Но вот проблему того, что cups не видит HP1018, но видит HP1022 - решить не смог, хотя /usr/lib/cups/backend/usb видит принтер. ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-06-01 16:19 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-05-31 20:55 ` [Comm] hp1020 & p6 Michael Shigorin 2011-06-01 5:37 ` Evgeny 2011-06-01 15:12 ` Rinat Shigapov 2011-06-01 16:19 ` Евгений
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git