From: "Дегтярёв Дмитрий" <ddv@nevod.ru> To: ALT Linux Community general discussions <community@lists.altlinux.org> Subject: [Comm] Проблема с Xorg на ноутбуке Sony VGN-NR21MR Date: Fri, 01 Aug 2008 13:29:57 +0600 Message-ID: <4892BB75.90006@nevod.ru> (raw) [-- Attachment #1: Type: text/plain, Size: 3403 bytes --] Добрый день! Установил ALM-4.0.0r1 на данный ноутбук и никак не получается выставить родное разрешение экрана 1280x800. С драйвером intel9xx картинка в левом верхнем углу 800x600, при этом под ней в оставшейся части изображение дублируется. в нижней часты экрана видеокарточка аппаратно воспроизводит анимацию(вспышки всякие, спецэффекты), красиво но не надо. С драйвером vesa картинка тоже только 800x600 или 1024x768 в центре экрана. Изображение ни при каких обстоятельствах не растягивается, т.е. если сделать 640x480, то изображение будет занимать маленький квадратик. Пробовал генерировать ModeLine - безрезультатно, в krandrtray максимальное разрешение всё равно 800x600. Пробовал xorg.conf от ноута с монитором такого же разрешения, неполучилось. # lspci 00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown device 4353 (rev 15) 06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 08:03.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 08:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 08:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Как же быть? [-- Attachment #2: ddv.vcf --] [-- Type: text/x-vcard, Size: 1111 bytes --] begin:vcard fn;quoted-printable:=D0=94=D0=BC=D0=B8=D1=82=D1=80=D0=B8=D0=B9 =D0=94=D0=B5=D0=B3=D1=82=D1=8F= =D1=80=D1=91=D0=B2 n;quoted-printable;quoted-printable:=D0=94=D0=B5=D0=B3=D1=82=D1=8F=D1=80=D1=91=D0=B2;=D0=94=D0=BC=D0=B8=D1=82=D1=80=D0=B8=D0=B9 org;quoted-printable:=D0=9E=D0=9E=D0=9E "=D0=9D=D0=95=D0=92=D0=9E=D0=94" adr;quoted-printable;quoted-printable;quoted-printable;quoted-printable:;;=D0=9A=D0=BE=D0=BC=D1=81=D0=BE=D0=BC=D0=BE=D0=BB=D1=8C=D1=81=D0=BA=D0=B8=D0= =B9 =D0=BF=D1=80=D0=BE=D1=81=D0=BF=D0=B5=D0=BA=D1=82 34, =D0=BE=D1=84=D0=B8= =D1=81 519;=D0=9F=D0=B5=D1=80=D0=BC=D1=8C;=D0=9F=D0=B5=D1=80=D0=BC=D1=81=D0=BA=D0=B8=D0=B9 =D0=BA=D1=80=D0=B0=D0=B9= ;614000;=D0=A0=D0=BE=D1=81=D1=81=D0=B8=D0=B9=D1=81=D0=BA=D0=B0=D1=8F =D0=A4=D0=B5= =D0=B4=D0=B5=D1=80=D0=B0=D1=86=D0=B8=D1=8F email;internet:ddv@nevod.ru title;quoted-printable:=D0=A1=D0=B8=D1=81=D1=82=D0=B5=D0=BC=D0=BD=D1=8B=D0=B9 =D0=B8=D0=BD=D1=82= =D0=B5=D0=B3=D1=80=D0=B0=D1=82=D0=BE=D1=80 tel;work:+73422196960,+73422385309 tel;cell:+79082555386 x-mozilla-html:FALSE url:www.nevod.ru version:2.1 end:vcard
next reply other threads:[~2008-08-01 7:29 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2008-08-01 7:29 Дегтярёв Дмитрий [this message] 2008-08-01 7:44 ` Alexey I. Froloff 2008-08-01 12:11 ` Andriy Dobrovol`s`kii 2008-08-04 6:13 ` Dmitry Tabunov 2008-08-04 20:45 ` Michael Shigorin 2008-08-05 6:24 ` Dmitry Tabunov 2008-08-05 7:11 ` Dmitry Tabunov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4892BB75.90006@nevod.ru \ --to=ddv@nevod.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git