[Comm] usb cardreader

[alisher <alisher_faiz@rambler.ru>]

Здравствуйте. Есть usb cardreader подключаю делаю как в faq написано, 
вроде все определилось но как монтировать не пойму. Пробовал так: mount 
-t vfat /dev/sdf0 /mnt/mmc. Может кто-нибудь подсказать по этому поводу?
cat /var/log/messages
...
Jul 24 10:30:44 serversmb kernel: usb 1-1: new high speed USB device 
using ehci_hcd and address 3
Jul 24 10:30:45 serversmb kernel: usb 1-1: configuration #1 chosen from 
1 choice
Jul 24 10:30:45 serversmb kernel: usbcore: registered new driver libusual
Jul 24 10:30:45 serversmb kernel: Initializing USB Mass Storage driver...
Jul 24 10:30:45 serversmb kernel: scsi2 : SCSI emulation for USB Mass 
Storage devices
Jul 24 10:30:45 serversmb kernel: usbcore: registered new driver usb-storage
Jul 24 10:30:45 serversmb kernel: USB Mass Storage support registered.
Jul 24 10:30:50 serversmb kernel:   Vendor: Generic   Model: USB SD 
Reader     Rev: 1.00
Jul 24 10:30:50 serversmb kernel:   Type:   
Direct-Access                      ANSI SCSI revision: 00
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:0: Attached scsi removable 
disk sdc
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:0: Attached scsi generic sg3 
type 0
Jul 24 10:30:50 serversmb kernel:   Vendor: Generic   Model: USB CF 
Reader     Rev: 1.01
Jul 24 10:30:50 serversmb kernel:   Type:   
Direct-Access                      ANSI SCSI revision: 00
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:1: Attached scsi removable 
disk sdd
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:1: Attached scsi generic sg4 
type 0
Jul 24 10:30:50 serversmb kernel:   Vendor: Generic   Model: USB SM 
Reader     Rev: 1.02
Jul 24 10:30:50 serversmb kernel:   Type:   
Direct-Access                      ANSI SCSI revision: 00
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:2: Attached scsi removable 
disk sde
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:2: Attached scsi generic sg5 
type 0
Jul 24 10:30:50 serversmb kernel:   Vendor: Generic   Model: USB MS 
Reader     Rev: 1.03
Jul 24 10:30:50 serversmb kernel:   Type:   
Direct-Access                      ANSI SCSI revision: 00
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:3: Attached scsi removable 
disk sdf
Jul 24 10:30:50 serversmb kernel: sd 2:0:0:3: Attached scsi generic sg6 
type 0

cat /etc/modules.conf
# Local configuration goes here.
# To inspect package defined part, see also /etc/modutils.d/
alias net-pf-31 bluez
alias tty-ldisc-15 hci_uart
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-5 bnep
options scsi_mod max_luns=255

cat /etc/sysconfig/usb
# -*- Mode: sh -*-
# Set this to no if you don't want USB.
USB=yes

# This will force to load the usb system and keyboard at the early
# process of the boot proces
KEYBOARD_AT_BOOT=no

# Some driver you may want to force the load, normally all of this is
# done by the USBD daemon
MOUSE=no
KEYBOARD=no
STORAGE=yes
VISOR=no
PRINTER=no