From: s-damir <s-damir@mail.ru> To: ALT Linux Community general discussions <community@lists.altlinux.org> Subject: Re: [Comm] Открытие порта Date: Thu, 03 Jul 2008 23:41:41 +0600 Message-ID: <486D0F55.40907@mail.ru> (raw) In-Reply-To: <486D0A1C.5020901@mail.ru> s-damir пишет: > Алексей Шенцев пишет: >> В сообщении от Thursday 03 July 2008 19:08:39 s-damir написал(а): >> >>> На команду service iptables status пишет: bash: service: command >>> not found >>> На команду iptables-save пишет bash: iptables-save: command not found >>> >> Что то я не уследил за дискуссией. У вас какой дистрибутив то? >> > AltLinux Personal Desktop 4.0 > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community Разобрался, оказывается нужно было su- набирать, с дифисом, а я сначало не понял фразу: > > А это, наверняка, любимейшая и строго оберегаемая командой АЛЬТ фича > (она же любимая грабля) "su -" вместо "su". > _______________________________________________ А по поводу того, как мне открыть порт: Dmitriy Kruglikov пишет: > 1 июля 2008 г. 14:23 пользователь s-damir написал: > > >> Модем работает в режиме моста, в Интернет выхожу через Tkpppoe. >> > Жалко, телепаты в отпусках уже ... > А то они бы быстро определили, не режет ли ваш провайдер порты для > динамических адресов, > а за одно, динамический ли у вас адрес, или нет ... > Так же быстро определили схему маршрутов вашей сети и настройки > iptables ... > Им бы все сразу стало понятно ... > > Они, вероятно, сразу скаали бы, что настройки VPI-0, VCI-33, QoS-UBR и > прочие > не имеют ни малейшего отношения к стеку протоколов TCP/IP ... > > Но их нет, они в отпусках ... > > P.S. > У нас тут иногда появляются специалисты, которые могут выехать к вам и > выполнить все настройки на месте ... > Но оплата проезда, проживания и работ - за ваш счет ... Адрес динамический. Провайдер, скорее всего, порты не режет, т.к. на внутренней сети на торренте такие же клиенты моего провайдера, спокойно раздоют и порты у них открыты. Настройки iptables: [root@computer ~]# service iptables status Table: filter Chain INPUT (policy ACCEPT) target prot opt source destination LOG udp -- anywhere anywhere udp dpts:0:1023 LOG level warning LOG tcp -- anywhere anywhere tcp dpts:0:1023 LOG level warning DROP udp -- anywhere anywhere udp dpts:0:1023 DROP tcp -- anywhere anywhere tcp dpts:0:1023 LOG tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN LOG level warning DROP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN DROP icmp -- anywhere anywhere icmp echo-request Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@computer ~]# s [root@computer /]# su [root@computer /]# service iptables status Table: filter Chain INPUT (policy ACCEPT) target prot opt source destination LOG udp -- anywhere anywhere udp dpts:0:1023 LOG level warning LOG tcp -- anywhere anywhere tcp dpts:0:1023 LOG level warning DROP udp -- anywhere anywhere udp dpts:0:1023 DROP tcp -- anywhere anywhere tcp dpts:0:1023 LOG tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN LOG level warning DROP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN DROP icmp -- anywhere anywhere icmp echo-request Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Схему маршрутов я к сожалению не знаю, но если скажете как узнать, то напишу. И ещё проблема. В командной строке пишу: iptables -I INPUT -p tcp --destination-port 60550 -j ACCEPT. Сканирую через онлайн сканер этот порт -- он открыт. После отключения от интернета, и повторного подлючения, этот порт закрыт. Снова пишу в командной строке ту же команду, порт опять открывается. Так как мне открыть порт?
next prev parent reply other threads:[~2008-07-03 17:41 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2008-07-01 8:29 s-damir 2008-07-01 8:31 ` Andrey Rahmatullin 2008-07-01 8:36 ` Andrey Rahmatullin 2008-07-01 8:43 ` Motsyo Gennadi aka Drool 2008-07-01 8:50 ` s-damir 2008-07-01 9:51 ` Sergey Alembekov 2008-07-01 20:07 ` Владимир Кутявин 2008-07-01 8:55 ` Pavlov Konstantin 2008-07-01 9:09 ` s-damir 2008-07-01 9:12 ` Andrey Rahmatullin 2008-07-01 9:39 ` Sergey Alembekov 2008-07-01 10:42 ` Sergey Alembekov 2008-07-01 10:06 ` s-damir 2008-07-01 10:13 ` Motsyo Gennadi aka Drool 2008-07-01 10:16 ` Andrey Rahmatullin 2008-07-01 10:51 ` Motsyo Gennadi aka Drool 2008-07-01 10:17 ` Dmitriy Kruglikov 2008-07-01 10:42 ` s-damir 2008-07-01 10:54 ` Alexei V. Mezin 2008-07-01 11:23 ` s-damir 2008-07-01 11:34 ` Dmitriy Kruglikov 2008-07-01 15:08 ` Andriy Dobrovol`s`kii 2008-07-01 15:21 ` Dmitriy Kruglikov 2008-07-02 11:01 ` s-damir 2008-07-03 12:28 ` s-damir 2008-07-03 12:35 ` s-damir 2008-07-03 12:39 ` Алексей Шенцев 2008-07-03 12:49 ` s-damir 2008-07-03 12:56 ` Алексей Шенцев 2008-07-03 15:08 ` s-damir 2008-07-03 15:33 ` Алексей Шенцев 2008-07-03 17:19 ` s-damir 2008-07-03 17:41 ` s-damir [this message] 2008-07-03 13:07 ` Alexei V. Mezin 2008-07-03 14:21 ` s-damir 2008-07-03 13:13 ` Хихин Руслан 2008-07-03 14:23 ` s-damir 2008-07-03 14:40 ` s-damir 2008-07-04 9:03 ` Хихин Руслан 2008-07-04 9:16 ` Alexei V. Mezin 2008-07-03 13:45 ` Хихин Руслан 2008-07-03 14:16 ` s-damir 2008-07-01 9:30 ` [Comm] [JT] " Motsyo Gennadi aka Drool 2008-07-01 9:10 ` Andrey Rahmatullin 2008-07-01 8:38 ` [Comm] " Alexei V. Mezin 2008-07-01 9:07 ` Alexey Morsov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=486D0F55.40907@mail.ru \ --to=s-damir@mail.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git