* [Comm] Воспроизведение MP3 с помощью amaroka
@ 2008-05-18 10:37 Kharitonov A. Dmitry
2008-05-18 12:46 ` Motsyo Gennadi aka Drool
0 siblings, 1 reply; 12+ messages in thread
From: Kharitonov A. Dmitry @ 2008-05-18 10:37 UTC (permalink / raw)
To: community
Как улучшить качество воспроизведения MP3?
madplay воспроизводит значительно качественней.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 10:37 [Comm] Воспроизведение MP3 с помощью amaroka Kharitonov A. Dmitry
@ 2008-05-18 12:46 ` Motsyo Gennadi aka Drool
2008-05-18 13:51 ` Kharitonov A. Dmitry
0 siblings, 1 reply; 12+ messages in thread
From: Motsyo Gennadi aka Drool @ 2008-05-18 12:46 UTC (permalink / raw)
To: ALT Linux Community general discussions
Kharitonov A. Dmitry пишет:
> Как улучшить качество воспроизведения MP3?
> madplay воспроизводит значительно качественней.
Качественней чем что? Я юзаю qmmp и доволен. Так же хорошо играют
audacious и xmms с плагином дополнительного эквалайзера. Амарок лично
мне, не смотря на крутизну и навороты, звуком не понравился
категорически - глухой как через вату. Акустика - дерево.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 12:46 ` Motsyo Gennadi aka Drool
@ 2008-05-18 13:51 ` Kharitonov A. Dmitry
2008-05-18 14:08 ` Motsyo Gennadi aka Drool
0 siblings, 1 reply; 12+ messages in thread
From: Kharitonov A. Dmitry @ 2008-05-18 13:51 UTC (permalink / raw)
To: ALT Linux Community general discussions
>> Как улучшить качество воспроизведения MP3?
>> madplay воспроизводит значительно качественней.
>
> Качественней чем что? Я юзаю qmmp и доволен. Так же хорошо играют
> audacious и xmms с плагином дополнительного эквалайзера. Амарок лично
> мне, не смотря на крутизну и навороты, звуком не понравился
> категорически - глухой как через вату. Акустика - дерево.
Качественней чем amarok. Как я понимаю amarok использует движок xine.
Как поменять движок или настроить параметры движка?
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 13:51 ` Kharitonov A. Dmitry
@ 2008-05-18 14:08 ` Motsyo Gennadi aka Drool
2008-05-18 14:30 ` Kharitonov A. Dmitry
0 siblings, 1 reply; 12+ messages in thread
From: Motsyo Gennadi aka Drool @ 2008-05-18 14:08 UTC (permalink / raw)
To: ALT Linux Community general discussions
Kharitonov A. Dmitry пишет:
>> Качественней чем что? Я юзаю qmmp и доволен. Так же хорошо играют
>> audacious и xmms с плагином дополнительного эквалайзера. Амарок лично
>> мне, не смотря на крутизну и навороты, звуком не понравился
>> категорически - глухой как через вату. Акустика - дерево.
>
> Качественней чем amarok. Как я понимаю amarok использует движок xine.
> Как поменять движок или настроить параметры движка?
Попробовать что-то другое, кроме амарока? ;-)
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 14:08 ` Motsyo Gennadi aka Drool
@ 2008-05-18 14:30 ` Kharitonov A. Dmitry
2008-05-18 14:39 ` Motsyo Gennadi aka Drool
0 siblings, 1 reply; 12+ messages in thread
From: Kharitonov A. Dmitry @ 2008-05-18 14:30 UTC (permalink / raw)
To: ALT Linux Community general discussions
Motsyo Gennadi aka Drool пишет:
> Kharitonov A. Dmitry пишет:
>>> Качественней чем что? Я юзаю qmmp и доволен. Так же хорошо
>>> играют audacious и xmms с плагином дополнительного эквалайзера.
>>> Амарок лично мне, не смотря на крутизну и навороты, звуком не
>>> понравился категорически - глухой как через вату. Акустика - дерево.
>>
>> Качественней чем amarok. Как я понимаю amarok использует движок xine.
>> Как поменять движок или настроить параметры движка?
>
> Попробовать что-то другое, кроме амарока? ;-)
Интерфейс мне у него нравиться. Многие идеи у него тоже хороши.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 14:30 ` Kharitonov A. Dmitry
@ 2008-05-18 14:39 ` Motsyo Gennadi aka Drool
2008-05-18 15:20 ` Kharitonov A. Dmitry
2008-05-18 15:42 ` Владимир Гусев
0 siblings, 2 replies; 12+ messages in thread
From: Motsyo Gennadi aka Drool @ 2008-05-18 14:39 UTC (permalink / raw)
To: ALT Linux Community general discussions
Kharitonov A. Dmitry пишет:
>>> Качественней чем amarok. Как я понимаю amarok использует движок xine.
>>> Как поменять движок или настроить параметры движка?
>>
>> Попробовать что-то другое, кроме амарока? ;-)
>
> Интерфейс мне у него нравиться. Многие идеи у него тоже хороши.
Вам на проигрыватель смотреть или слушать музыку? ;-) Я держу амарок
исключительно только для выдирания адресов радиостанций. Автор qmmp
вроде обещался сделать такую же фишку, когда это будет готово - амарок у
меня уйдет совсем.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 14:39 ` Motsyo Gennadi aka Drool
@ 2008-05-18 15:20 ` Kharitonov A. Dmitry
2008-05-18 15:35 ` Motsyo Gennadi aka Drool
2008-05-18 15:42 ` Владимир Гусев
1 sibling, 1 reply; 12+ messages in thread
From: Kharitonov A. Dmitry @ 2008-05-18 15:20 UTC (permalink / raw)
To: ALT Linux Community general discussions
Motsyo Gennadi aka Drool пишет:
> Kharitonov A. Dmitry пишет:
>>>> Качественней чем amarok. Как я понимаю amarok использует движок
>>>> xine. Как поменять движок или настроить параметры движка?
>>>
>>> Попробовать что-то другое, кроме амарока? ;-)
>>
>> Интерфейс мне у него нравиться. Многие идеи у него тоже хороши.
>
> Вам на проигрыватель смотреть или слушать музыку? ;-) Я держу
> амарок исключительно только для выдирания адресов радиостанций. Автор
> qmmp вроде обещался сделать такую же фишку, когда это будет готово -
> амарок у меня уйдет совсем.
Поставил для интереса qmmp:
[user@localhost 19:14:05 ~]$ qmmp
Skin: set skin :/default
Skin: cannot find region.txt. Transparenty disabled
Output: plugin loaded - libalsa.so
Output: plugin loaded - libjack.so
Output: plugin loaded - liboss.so
Output: plugin loaded - libpulseaudio.so
OutputALSA: setupMixer()
OutputALSA: setupMixer() succes
Decoder: plugin loaded - libffmpeg.so
Decoder: plugin loaded - libflac.so
Decoder: plugin loaded - libmad.so
Decoder: plugin loaded - libmodplug.so
Decoder: plugin loaded - libmpc.so
Decoder: plugin loaded - libsndfile.so
Decoder: plugin loaded - libvorbis.so
Decoder: plugin loaded - libwavpack.so
Output: added external visualization
void MainWindow::addDir()
QtFileDialog::~QtFileDialog()
QtFileDialog::~QtFileDialog()
TagLib: MPEG::Header::parse() -- Invalid sample rate.
TagLib: MPEG::Header::parse() -- Invalid sample rate.
TagLib: MPEG::Header::parse() -- Invalid sample rate.
TagLib: MPEG::Header::parse() -- Invalid sample rate.
и так далее ничего, не воспроизводит...
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 15:20 ` Kharitonov A. Dmitry
@ 2008-05-18 15:35 ` Motsyo Gennadi aka Drool
2008-05-18 17:04 ` Kharitonov A. Dmitry
0 siblings, 1 reply; 12+ messages in thread
From: Motsyo Gennadi aka Drool @ 2008-05-18 15:35 UTC (permalink / raw)
To: ALT Linux Community general discussions
Kharitonov A. Dmitry пишет:
> Поставил для интереса qmmp:
> [user@localhost 19:14:05 ~]$ qmmp
> Skin: set skin :/default
> Skin: cannot find region.txt. Transparenty disabled
> Output: plugin loaded - libalsa.so
> Output: plugin loaded - libjack.so
> Output: plugin loaded - liboss.so
> Output: plugin loaded - libpulseaudio.so
> OutputALSA: setupMixer()
> OutputALSA: setupMixer() succes
> Decoder: plugin loaded - libffmpeg.so
> Decoder: plugin loaded - libflac.so
> Decoder: plugin loaded - libmad.so
> Decoder: plugin loaded - libmodplug.so
> Decoder: plugin loaded - libmpc.so
> Decoder: plugin loaded - libsndfile.so
> Decoder: plugin loaded - libvorbis.so
> Decoder: plugin loaded - libwavpack.so
> Output: added external visualization
> void MainWindow::addDir()
> QtFileDialog::~QtFileDialog()
> QtFileDialog::~QtFileDialog()
> TagLib: MPEG::Header::parse() -- Invalid sample rate.
> TagLib: MPEG::Header::parse() -- Invalid sample rate.
> TagLib: MPEG::Header::parse() -- Invalid sample rate.
> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>
> и так далее ничего, не воспроизводит...
Какая версия? Какой дистрибутив? У меня установлено такое:
rpm -qa | grep qmmp
qmmp-in-wavpack-0.2-alt0.svn374.M40.1
qmmp-vis-analyzer-0.2-alt0.svn374.M40.1
qmmp-skins-0.3-alt1
qmmp-in-modplug-0.2-alt0.svn374.M40.1
qmmp-in-flac-0.2-alt0.svn374.M40.1
qmmp-statusicon-0.2-alt0.svn374.M40.1
qmmp-in-sndfile-0.2-alt0.svn374.M40.1
qmmp-in-musepack-0.2-alt0.svn374.M40.1
qmmp-0.2-alt0.svn374.M40.1
qmmp-in-ffmpeg-0.2-alt0.svn374.M40.1
Посмотрите в настройках (Ctrl+P) какой модуль выбран для вывода (alsa,
jack, oss?). У меня идет через alsa, в его настройках сделан выбор
конкретного устройства.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 15:35 ` Motsyo Gennadi aka Drool
@ 2008-05-18 17:04 ` Kharitonov A. Dmitry
2008-05-18 17:17 ` Kharitonov A. Dmitry
0 siblings, 1 reply; 12+ messages in thread
From: Kharitonov A. Dmitry @ 2008-05-18 17:04 UTC (permalink / raw)
To: ALT Linux Community general discussions
Motsyo Gennadi aka Drool пишет:
> Kharitonov A. Dmitry пишет:
>> Поставил для интереса qmmp:
>> [user@localhost 19:14:05 ~]$ qmmp
>> Skin: set skin :/default
>> Skin: cannot find region.txt. Transparenty disabled
>> Output: plugin loaded - libalsa.so
>> Output: plugin loaded - libjack.so
>> Output: plugin loaded - liboss.so
>> Output: plugin loaded - libpulseaudio.so
>> OutputALSA: setupMixer()
>> OutputALSA: setupMixer() succes
>> Decoder: plugin loaded - libffmpeg.so
>> Decoder: plugin loaded - libflac.so
>> Decoder: plugin loaded - libmad.so
>> Decoder: plugin loaded - libmodplug.so
>> Decoder: plugin loaded - libmpc.so
>> Decoder: plugin loaded - libsndfile.so
>> Decoder: plugin loaded - libvorbis.so
>> Decoder: plugin loaded - libwavpack.so
>> Output: added external visualization
>> void MainWindow::addDir()
>> QtFileDialog::~QtFileDialog()
>> QtFileDialog::~QtFileDialog()
>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>>
>> и так далее ничего, не воспроизводит...
>
> Какая версия? Какой дистрибутив? У меня установлено такое:
> rpm -qa | grep qmmp
> qmmp-in-wavpack-0.2-alt0.svn374.M40.1
> qmmp-vis-analyzer-0.2-alt0.svn374.M40.1
> qmmp-skins-0.3-alt1
> qmmp-in-modplug-0.2-alt0.svn374.M40.1
> qmmp-in-flac-0.2-alt0.svn374.M40.1
> qmmp-statusicon-0.2-alt0.svn374.M40.1
> qmmp-in-sndfile-0.2-alt0.svn374.M40.1
> qmmp-in-musepack-0.2-alt0.svn374.M40.1
> qmmp-0.2-alt0.svn374.M40.1
> qmmp-in-ffmpeg-0.2-alt0.svn374.M40.1
Desktop 4.0.3[user@localhost 20:45:46 ~]$ rpm -qa | grep qmmp
qmmp-0.2-alt0.svn369.M40.1
> Посмотрите в настройках (Ctrl+P) какой модуль выбран для вывода
> (alsa, jack, oss?). У меня идет через alsa, в его настройках сделан
> выбор конкретного устройства.
А причем тут это? Глючит-то библиотека обработки тегов.
А воспроизводить он должен через
[user@localhost 20:58:58 ~]$ rpm -qa | grep libmad
libmad-0.15.1b-alt3
в настройках соответствующая галка стоит. Библиотека затыкается на
служебных кадрах потока (которые она должна игнорировать). Все руки не
доходят поправить.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 17:04 ` Kharitonov A. Dmitry
@ 2008-05-18 17:17 ` Kharitonov A. Dmitry
2008-05-18 17:46 ` Motsyo Gennadi aka Drool
0 siblings, 1 reply; 12+ messages in thread
From: Kharitonov A. Dmitry @ 2008-05-18 17:17 UTC (permalink / raw)
To: ALT Linux Community general discussions
Kharitonov A. Dmitry пишет:
> Motsyo Gennadi aka Drool пишет:
>> Kharitonov A. Dmitry пишет:
>>> Поставил для интереса qmmp:
>>> [user@localhost 19:14:05 ~]$ qmmp
>>> Skin: set skin :/default
>>> Skin: cannot find region.txt. Transparenty disabled
>>> Output: plugin loaded - libalsa.so
>>> Output: plugin loaded - libjack.so
>>> Output: plugin loaded - liboss.so
>>> Output: plugin loaded - libpulseaudio.so
>>> OutputALSA: setupMixer()
>>> OutputALSA: setupMixer() succes
>>> Decoder: plugin loaded - libffmpeg.so
>>> Decoder: plugin loaded - libflac.so
>>> Decoder: plugin loaded - libmad.so
>>> Decoder: plugin loaded - libmodplug.so
>>> Decoder: plugin loaded - libmpc.so
>>> Decoder: plugin loaded - libsndfile.so
>>> Decoder: plugin loaded - libvorbis.so
>>> Decoder: plugin loaded - libwavpack.so
>>> Output: added external visualization
>>> void MainWindow::addDir()
>>> QtFileDialog::~QtFileDialog()
>>> QtFileDialog::~QtFileDialog()
>>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>>> TagLib: MPEG::Header::parse() -- Invalid sample rate.
>>>
>>> и так далее ничего, не воспроизводит...
>>
>> Какая версия? Какой дистрибутив? У меня установлено такое:
>> rpm -qa | grep qmmp
>> qmmp-in-wavpack-0.2-alt0.svn374.M40.1
>> qmmp-vis-analyzer-0.2-alt0.svn374.M40.1
>> qmmp-skins-0.3-alt1
>> qmmp-in-modplug-0.2-alt0.svn374.M40.1
>> qmmp-in-flac-0.2-alt0.svn374.M40.1
>> qmmp-statusicon-0.2-alt0.svn374.M40.1
>> qmmp-in-sndfile-0.2-alt0.svn374.M40.1
>> qmmp-in-musepack-0.2-alt0.svn374.M40.1
>> qmmp-0.2-alt0.svn374.M40.1
>> qmmp-in-ffmpeg-0.2-alt0.svn374.M40.1
> Desktop 4.0.3[user@localhost 20:45:46 ~]$ rpm -qa | grep qmmp
> qmmp-0.2-alt0.svn369.M40.1
>
>> Посмотрите в настройках (Ctrl+P) какой модуль выбран для вывода
>> (alsa, jack, oss?). У меня идет через alsa, в его настройках сделан
>> выбор конкретного устройства.
> А причем тут это? Глючит-то библиотека обработки тегов.
> А воспроизводить он должен через
> [user@localhost 20:58:58 ~]$ rpm -qa | grep libmad
> libmad-0.15.1b-alt3
> в настройках соответствующая галка стоит. Библиотека затыкается на
> служебных кадрах потока (которые она должна игнорировать). Все руки не
> доходят поправить.
>
ему реинсталл - запел
Он умеет как-то работать с коллекцыей?
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Воспроизведение MP3 с помощью amaroka
2008-05-18 14:39 ` Motsyo Gennadi aka Drool
2008-05-18 15:20 ` Kharitonov A. Dmitry
@ 2008-05-18 15:42 ` Владимир Гусев
1 sibling, 0 replies; 12+ messages in thread
From: Владимир Гусев @ 2008-05-18 15:42 UTC (permalink / raw)
To: ALT Linux Community general discussions
>> [..]
>> Интерфейс мне у него нравиться. Многие идеи у него тоже хороши.
> Вам на проигрыватель смотреть или слушать музыку?[..]
В программе все должно быть прекрасно - "и душа и тело" :-)
--
С уважением, Владимир Гусев
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2008-05-18 17:46 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-05-18 10:37 [Comm] Воспроизведение MP3 с помощью amaroka Kharitonov A. Dmitry
2008-05-18 12:46 ` Motsyo Gennadi aka Drool
2008-05-18 13:51 ` Kharitonov A. Dmitry
2008-05-18 14:08 ` Motsyo Gennadi aka Drool
2008-05-18 14:30 ` Kharitonov A. Dmitry
2008-05-18 14:39 ` Motsyo Gennadi aka Drool
2008-05-18 15:20 ` Kharitonov A. Dmitry
2008-05-18 15:35 ` Motsyo Gennadi aka Drool
2008-05-18 17:04 ` Kharitonov A. Dmitry
2008-05-18 17:17 ` Kharitonov A. Dmitry
2008-05-18 17:46 ` Motsyo Gennadi aka Drool
2008-05-18 15:42 ` Владимир Гусев
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git