* [Comm] lm sensors
@ 2008-04-27 18:28 Vladimir Karpinsky
2008-04-27 19:31 ` Sergey Vlasov
0 siblings, 1 reply; 3+ messages in thread
From: Vladimir Karpinsky @ 2008-04-27 18:28 UTC (permalink / raw)
To: ALT Linux Community general discussions
Здравствуйте!
Пытаюсь настроить lm_sensors: sensors-detect отрабатывает и выдаёт:
Driver `to-be-written' (should be inserted):
Detects correctly:
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x09
Chip `Smart Battery Charger' (confidence: 5)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x0a
Chip `Smart Battery Manager/Selector' (confidence: 5)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x18
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x19
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x1a
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x1b
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x1c
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x1d
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x1e
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x1f
Chip `Philips Semiconductors PCA9556' (confidence: 1)
Driver `smartbatt' (should be inserted):
Detects correctly:
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x0b
Chip `Smart Battery' (confidence: 5)
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x50
Chip `eeprom' (confidence: 6)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x51
Chip `eeprom' (confidence: 6)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x52
Chip `eeprom' (confidence: 6)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x53
Chip `eeprom' (confidence: 6)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x54
Chip `eeprom' (confidence: 6)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x55
Chip `eeprom' (confidence: 6)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x56
Chip `eeprom' (confidence: 6)
* Bus `NVIDIA i2c adapter 2 at 5:00.0'
Busdriver `UNKNOWN', I2C address 0x57
Chip `eeprom' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x50
Chip `eeprom' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x51
Chip `eeprom' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x52
Chip `eeprom' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x53
Chip `eeprom' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x54
Chip `eeprom' (confidence: 6)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x55
Chip `eeprom' (confidence: 6)
EEPROMs are *NOT* sensors! They are data storage chips commonly
found on memory modules (SPD), in monitors (EDID), or in some
laptops, for example.
Driver `w83627ehf' (should be inserted):
Detects correctly:
* ISA bus, address 0x290
Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9)
Driver `coretemp' (should be inserted):
Detects correctly:
* Chip `Intel Core family thermal sensor' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To make the sensors modules behave correctly, add these lines to
/etc/modprobe.d/lm_sensors:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----
...
modprobe i2c-i801
# Chip drivers
# no driver for Smart Battery Charger yet
# Warning: the required module smartbatt is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
modprobe smartbatt
modprobe eeprom
modprobe w83627ehf
# Warning: the required module coretemp is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
modprobe coretemp
Ну, и далее: модули i2c и eeprom загружаются, coretemp и smartbatt
отсутствуют, как класс, а modprobe w83627ehf даёт ошибку:
FATAL: Error inserting w83627ehf
(/lib/modules/2.6.18-std-smp-alt7/kernel/drivers/hwmon/w83627ehf.ko): No
such device
И, как следствие:
# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
Можно всё-таки заставить работать сенсоры?
# sensors -v
sensors version 2.10.2 with libsensors version 2.10.2
# uname -a
Linux newseismix 2.6.18-std-smp-alt7 #1 SMP Sat Aug 4 00:07:54 MSD 2007
i686 GNU/Linux
--
С уважением,
Владимир.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] lm sensors
2008-04-27 18:28 [Comm] lm sensors Vladimir Karpinsky
@ 2008-04-27 19:31 ` Sergey Vlasov
2008-04-28 7:48 ` Vladimir Karpinsky
0 siblings, 1 reply; 3+ messages in thread
From: Sergey Vlasov @ 2008-04-27 19:31 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 3359 bytes --]
On Sun, Apr 27, 2008 at 10:28:24PM +0400, Vladimir Karpinsky wrote:
> Пытаюсь настроить lm_sensors: sensors-detect
> отрабатывает и выдаёт:
>
> Driver `to-be-written' (should be inserted):
> Detects correctly:
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x09
> Chip `Smart Battery Charger' (confidence: 5)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x0a
> Chip `Smart Battery Manager/Selector' (confidence: 5)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x18
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x19
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x1a
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x1b
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x1c
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x1d
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x1e
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x1f
> Chip `Philips Semiconductors PCA9556' (confidence: 1)
Это явно что-то неверно определилось...
> Driver `smartbatt' (should be inserted):
> Detects correctly:
> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
> Busdriver `UNKNOWN', I2C address 0x0b
> Chip `Smart Battery' (confidence: 5)
И это тоже (ну откуда на видеокарте батарея?).
> Driver `w83627ehf' (should be inserted):
> Detects correctly:
> * ISA bus, address 0x290
> Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9)
Хотя модуль w83627ehf и есть в ядре 2.6.18, поддержка чипа W83627DHG в
нём появилась только начиная с 2.6.21.
> Driver `coretemp' (should be inserted):
> Detects correctly:
> * Chip `Intel Core family thermal sensor' (confidence: 9)
Модуль coretemp в общем случае присутствует только в ядрах >= 2.6.22,
однако добавлен в kernel-image-std-smp >= 2.6.18-alt11.
> Можно всё-таки заставить работать
> сенсоры?
>
> # sensors -v
> sensors version 2.10.2 with libsensors version 2.10.2
>
> # uname -a
> Linux newseismix 2.6.18-std-smp-alt7 #1 SMP Sat Aug 4 00:07:54 MSD 2007
> i686 GNU/Linux
Модуль coretemp есть в свежих сборках ядер 2.6.18-std-smp (правда,
поддержки новых процессоров Penryn там нет - её добавили только в
2.6.25); для поддержки остальных сенсоров потребуется более
существенное обновление ядра.
Кстати, что это за материнка? На некоторых платах сенсоры на самом
деле не подключены к чипу Super-IO (например, у ABIT в топовых моделях
используется собственный чип uGuru, который не определяется
автоматически через sensors-detect; модуль abituguru3 также добавлен в
2.6.18-std-smp-alt11, а вообще входит в ядро начиная с 2.6.23).
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] lm sensors
2008-04-27 19:31 ` Sergey Vlasov
@ 2008-04-28 7:48 ` Vladimir Karpinsky
0 siblings, 0 replies; 3+ messages in thread
From: Vladimir Karpinsky @ 2008-04-28 7:48 UTC (permalink / raw)
To: community
Здравствуйте!
Sergey Vlasov пишет:
> On Sun, Apr 27, 2008 at 10:28:24PM +0400, Vladimir Karpinsky wrote:
>> Пытаюсь настроить lm_sensors: sensors-detect
>> отрабатывает и выдаёт:
>> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
>> Busdriver `UNKNOWN', I2C address 0x1f
>> Chip `Philips Semiconductors PCA9556' (confidence: 1)
>
> Это явно что-то неверно определилось...
>
>> Driver `smartbatt' (should be inserted):
>> Detects correctly:
>> * Bus `NVIDIA i2c adapter 2 at 5:00.0'
>> Busdriver `UNKNOWN', I2C address 0x0b
>> Chip `Smart Battery' (confidence: 5)
>
> И это тоже (ну откуда на видеокарте батарея?).
Я тоже удивился
>> Driver `w83627ehf' (should be inserted):
>> Detects correctly:
>> * ISA bus, address 0x290
>> Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9)
>
> Хотя модуль w83627ehf и есть в ядре 2.6.18, поддержка чипа W83627DHG в
> нём появилась только начиная с 2.6.21.
>
>> Driver `coretemp' (should be inserted):
>> Detects correctly:
>> * Chip `Intel Core family thermal sensor' (confidence: 9)
>
> Модуль coretemp в общем случае присутствует только в ядрах >= 2.6.22,
> однако добавлен в kernel-image-std-smp >= 2.6.18-alt11.
>
>> Можно всё-таки заставить работать
>> сенсоры?
>>
>> # sensors -v
>> sensors version 2.10.2 with libsensors version 2.10.2
>>
>> # uname -a
>> Linux newseismix 2.6.18-std-smp-alt7 #1 SMP Sat Aug 4 00:07:54 MSD 2007
>> i686 GNU/Linux
>
> Модуль coretemp есть в свежих сборках ядер 2.6.18-std-smp (правда,
> поддержки новых процессоров Penryn там нет - её добавили только в
> 2.6.25); для поддержки остальных сенсоров потребуется более
> существенное обновление ядра.
>
> Кстати, что это за материнка? На некоторых платах сенсоры на самом
> деле не подключены к чипу Super-IO (например, у ABIT в топовых моделях
> используется собственный чип uGuru, который не определяется
> автоматически через sensors-detect; модуль abituguru3 также добавлен в
> 2.6.18-std-smp-alt11, а вообще входит в ядро начиная с 2.6.23).
ASUS P5M2-E чипсет Intel® 3000 MCH + Intel® ICH7R
В целом понятно: надо для начала обновить ядро и попробовать ещё раз...
--
С уважением,
Владимир.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-04-28 7:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-04-27 18:28 [Comm] lm sensors Vladimir Karpinsky
2008-04-27 19:31 ` Sergey Vlasov
2008-04-28 7:48 ` Vladimir Karpinsky
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git