* [Comm] Остановите Clamav!
@ 2008-04-23 6:48 Vyacheslav Brunev
2008-04-23 6:56 ` Vyacheslav Brunev
0 siblings, 1 reply; 4+ messages in thread
From: Vyacheslav Brunev @ 2008-04-23 6:48 UTC (permalink / raw)
To: ALT Linux Community general discussions
Доброго времени суток уважаемое сообщество!
Столкнулся с небольшой неприятностью с антивирусом Clamav. Вот небольшой дамп
будет гораздо понятней моих слов:
[root@gate ~]# service clamd status
clamd is stopped
[root@gate ~]# service clamd start
Starting clamd service: [ DONE ]
[root@gate ~]# service clamd status
clamd is dead, but subsystem is locked
[root@gate ~]# ls -l /var/lock/subsys/ | grep clamd
-rw-r--r-- 1 root root 0 Апр 23 13:43 clamd
[root@gate ~]# ls -l /var/run/clamav/
итого 0
[root@gate ~]# ps ax | grep clamd
12626 ? Ss 0:09 /usr/sbin/clamd
12646 pts/3 S+ 0:00 grep clamd
[root@gate ~]# service clamd stop
Service clamd is not running.[PASSED]
И чего? Копаться в src и собирать самому?
Или есть другие предложения?
Выкидывание из init-scripts секции stop строчки параметра:
--pidfile "$PIDFILE" не предлагать, всё же должно работать из коробки!
--
С уважением, Вячеслав.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Остановите Clamav!
2008-04-23 6:48 [Comm] Остановите Clamav! Vyacheslav Brunev
@ 2008-04-23 6:56 ` Vyacheslav Brunev
2008-04-23 8:07 ` Serge
0 siblings, 1 reply; 4+ messages in thread
From: Vyacheslav Brunev @ 2008-04-23 6:56 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Wednesday 23 April 2008 13:48:32 Vyacheslav Brunev написал(а):
> Доброго времени суток уважаемое сообщество!
>
> Столкнулся с небольшой неприятностью с антивирусом Clamav. Вот небольшой
> дамп будет гораздо понятней моих слов:
>
> [root@gate ~]# service clamd status
> clamd is stopped
> [root@gate ~]# service clamd start
> Starting clamd service: [ DONE ]
> [root@gate ~]# service clamd status
> clamd is dead, but subsystem is locked
> [root@gate ~]# ls -l /var/lock/subsys/ | grep clamd
> -rw-r--r-- 1 root root 0 Апр 23 13:43 clamd
> [root@gate ~]# ls -l /var/run/clamav/
> итого 0
> [root@gate ~]# ps ax | grep clamd
> 12626 ? Ss 0:09 /usr/sbin/clamd
> 12646 pts/3 S+ 0:00 grep clamd
> [root@gate ~]# service clamd stop
> Service clamd is not running.[PASSED]
>
> И чего? Копаться в src и собирать самому?
> Или есть другие предложения?
>
> Выкидывание из init-scripts секции stop строчки параметра:
> --pidfile "$PIDFILE" не предлагать, всё же должно работать из коробки!
Да забыл про версию:
[root@gate ~]# clamd --version
ClamAV 0.92.1-exp/6891/Wed Apr 23 09:03:13 2008
--
С уважением, Вячеслав.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Остановите Clamav!
2008-04-23 6:56 ` Vyacheslav Brunev
@ 2008-04-23 8:07 ` Serge
2008-04-23 8:46 ` Шишков Евгений
0 siblings, 1 reply; 4+ messages in thread
From: Serge @ 2008-04-23 8:07 UTC (permalink / raw)
To: bv, ALT Linux Community general discussions
В сообщении от Wednesday 23 April 2008 09:56:23 Vyacheslav Brunev написал(а):
> В сообщении от Wednesday 23 April 2008 13:48:32 Vyacheslav Brunev
написал(а):
> > Доброго времени суток уважаемое сообщество!
> >
> > Столкнулся с небольшой неприятностью с антивирусом Clamav. Вот небольшой
> > дамп будет гораздо понятней моих слов:
> >
> > [root@gate ~]# service clamd status
> > clamd is stopped
> > [root@gate ~]# service clamd start
> > Starting clamd service: [ DONE ]
> > [root@gate ~]# service clamd status
> > clamd is dead, but subsystem is locked
> > [root@gate ~]# ls -l /var/lock/subsys/ | grep clamd
> > -rw-r--r-- 1 root root 0 Апр 23 13:43 clamd
> > [root@gate ~]# ls -l /var/run/clamav/
> > итого 0
> > [root@gate ~]# ps ax | grep clamd
> > 12626 ? Ss 0:09 /usr/sbin/clamd
> > 12646 pts/3 S+ 0:00 grep clamd
> > [root@gate ~]# service clamd stop
> > Service clamd is not running.[PASSED]
> >
> > И чего? Копаться в src и собирать самому?
> > Или есть другие предложения?
> >
> > Выкидывание из init-scripts секции stop строчки параметра:
> > --pidfile "$PIDFILE" не предлагать, всё же должно работать из коробки!
>
> Да забыл про версию:
> [root@gate ~]# clamd --version
> ClamAV 0.92.1-exp/6891/Wed Apr 23 09:03:13 2008
у меня эта версия портирована на Master24 работает пока без замечаний
советую, если есть файл clamd.conf.rpmnew, замените им clamd.conf
сконфигурируйте clamd заново. Должно помочь
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Остановите Clamav!
2008-04-23 8:07 ` Serge
@ 2008-04-23 8:46 ` Шишков Евгений
0 siblings, 0 replies; 4+ messages in thread
From: Шишков Евгений @ 2008-04-23 8:46 UTC (permalink / raw)
To: ALT Linux Community general discussions
Serge пишет:
> В сообщении от Wednesday 23 April 2008 09:56:23 Vyacheslav Brunev написал(а):
>> В сообщении от Wednesday 23 April 2008 13:48:32 Vyacheslav Brunev
> написал(а):
>>> Доброго времени суток уважаемое сообщество!
>>>
>>> Столкнулся с небольшой неприятностью с антивирусом Clamav. Вот небольшой
>>> дамп будет гораздо понятней моих слов:
>>>
>>> [root@gate ~]# service clamd status
>>> clamd is stopped
>>> [root@gate ~]# service clamd start
>>> Starting clamd service: [ DONE ]
>>> [root@gate ~]# service clamd status
>>> clamd is dead, but subsystem is locked
>>> [root@gate ~]# ls -l /var/lock/subsys/ | grep clamd
>>> -rw-r--r-- 1 root root 0 Апр 23 13:43 clamd
>>> [root@gate ~]# ls -l /var/run/clamav/
>>> итого 0
>>> [root@gate ~]# ps ax | grep clamd
>>> 12626 ? Ss 0:09 /usr/sbin/clamd
>>> 12646 pts/3 S+ 0:00 grep clamd
>>> [root@gate ~]# service clamd stop
>>> Service clamd is not running.[PASSED]
>>>
>>> И чего? Копаться в src и собирать самому?
>>> Или есть другие предложения?
>>>
>>> Выкидывание из init-scripts секции stop строчки параметра:
>>> --pidfile "$PIDFILE" не предлагать, всё же должно работать из коробки!
>> Да забыл про версию:
>> [root@gate ~]# clamd --version
>> ClamAV 0.92.1-exp/6891/Wed Apr 23 09:03:13 2008
> у меня эта версия портирована на Master24 работает пока без замечаний
> советую, если есть файл clamd.conf.rpmnew, замените им clamd.conf
> сконфигурируйте clamd заново. Должно помочь
Я тоже перебирал этот пакет для master24
И пришлось конфиг заново настраивать.
Правда со старым конфигом была ругань сервиса на то, что он не может понять некоторые
параметры конфига. Уж больно сильно он изменился.
Правьте конфиг.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-04-23 8:46 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-04-23 6:48 [Comm] Остановите Clamav! Vyacheslav Brunev
2008-04-23 6:56 ` Vyacheslav Brunev
2008-04-23 8:07 ` Serge
2008-04-23 8:46 ` Шишков Евгений
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git