* Re: [Comm] Настройка внешней звуковой карты через интерфейс ieee1394
@ 2008-02-02 22:49 Докторов Михаил
0 siblings, 0 replies; only message in thread
From: Докторов Михаил @ 2008-02-02 22:49 UTC (permalink / raw)
To: ALT Linux Community general discussions
Извиняюсь за опоздалый ответ.
Итак, по порядку:
1)
"Вообще с поддержкой звуковых устройств Firewire в Linux ситуация не
очень хорошая - см. http://ffado.org/; в ALT Linux 4.0.x есть некий
пакет libfreebob-1.0.0-alt0.svn.r300 (проект FreeBoB переименовался в
FFADO), но о его работоспособности я ничего сказать не могу. Пакет
jackit собран с поддержкой freebob - подключать устройство надо через
него; при необходимости вывода звука из программ, использующих
libalsa, нужно настраивать вывод через jack plugin (пакет
alsa-plugins)."
Пробовал запустить сервер Jackd - не удалось.
Использую утилиту qjackctl
Вот лог ее работы:
01:36:54.343 jackd -v -R -dfreebob -r44100 -p256 -n2 -i0 -o0
01:36:54.345 JACK was started with PID=23964 (0x5d9c).
getting driver descriptor from /usr/lib/jack/jack_alsa.so
getting driver descriptor from /usr/lib/jack/jack_dummy.so
getting driver descriptor from /usr/lib/jack/jack_freebob.so
getting driver descriptor from /usr/lib/jack/jack_oss.so
jackd 0.102.20
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
server `default' registered
cannot use real-time scheduling (FIFO at priority 10) [for thread -1210415424, from thread -1210415424] (1: Operation not permitted)
cannot create engine
cleaning up shared memory
cleaning up files
unregistering server `default'
01:36:54.361 JACK was stopped successfully.
01:36:54.361 Post-shutdown script...
01:36:54.365 killall jackd
2)
Порывшись в сети нашел прогу gscanbus. Она определяет мою звуковуху:
"SelfID Info
-----------
Physical ID: 0
Link active: Yes
Gap Count: 63
PHY Speed: S400
PHY Delay: <=144ns
IRM Capable: Yes
Power Class: +15W
Port 0: Connected to parent node
Port 1: Not connected
Init. reset: No
CSR ROM Info
------------
GUID: 0x000D6C0B00E59007
Node Capabilities: 0x000083C0
Vendor ID: 0x00000D6C
Unit Spec ID: 0x0000A02D
Unit SW Version: 0x00010001
Model ID: 0x00010062
Nr. Textual Leafes: 2
Vendor: Unknown
Textual Leafes:
M-Audio
FW Solo
AV/C Subunits
-------------
Unknown: 1
Unknown: 1"
3)
"VIA - не лучший вариант. Покажите вывод dmesg|grep 1394 - какие-то
чипы от VIA не поддерживали даже OHCI-1394 1.1."
$ dmesg|grep 1394
ieee1394: Initialized config rom entry `ip1394'
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[66]
MMIO=[fdffe000-fdffe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011666606091d4a]
ieee1394: Node added: ID:BUS[0-01:1023] GUID[000d6c0b00e59007]
ieee1394: raw1394: /dev/raw1394 device initialized
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
Помогите, пожалуйста, связать все ниточки в узелок :)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-02-02 22:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-02-02 22:49 [Comm] Настройка внешней звуковой карты через интерфейс ieee1394 Докторов Михаил
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git