From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <46FBDB9C.5020201@gmail.com> Date: Thu, 27 Sep 2007 20:34:36 +0400 From: Mike Shuvalov User-Agent: Thunderbird 2.0.0.6 (X11/20070804) MIME-Version: 1.0 To: shigorin@gmail.com, ALT Linux Community general discussions References: <46FAA2E4.2090703@gmail.com> <20070926183310.GJ21544@osdn.org.ua> In-Reply-To: <20070926183310.GJ21544@osdn.org.ua> Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: 8bit Subject: Re: [Comm] =?koi8-r?b?QUxENCDw0s/CzMXNwSDTIEV0aDA=?= X-BeenThere: community@lists.altlinux.org X-Mailman-Version: 2.1.9 Precedence: list Reply-To: ALT Linux Community general discussions List-Id: ALT Linux Community general discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Sep 2007 16:34:48 -0000 Archived-At: List-Archive: List-Post: Michael Shigorin пишет: > On Wed, Sep 26, 2007 at 10:20:20PM +0400, Mike Shuvalov wrote: >> Обновил систему и появились тормоза на eth0. Пинги до соседней >> машины принимают фантастические значения: >> Что где нужно подкрутить, что бы вылечить это дело? > > Покажите dmesg и /proc/interrupts? (возможно, поможет загрузка > с pci=noacpi или заклинания из той же оперы) > Вот вывод dmesg: ============================== Linux version 2.6.18-std-smp-alt8 (builder@hint1.office.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Mon Sep 24 01:41:06 MSD 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4cb0 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.4 present. ACPI: RSDP (v000 GBT ) @ 0x000f6620 ACPI: RSDT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff3040 ACPI: FADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff30c0 ACPI: HPET (v001 GBT GBTUACPI 0x42302e31 GBTU 0x00000098) @ 0x3fff69c0 ACPI: MCFG (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff6a40 ACPI: MADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff6900 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x3fff6ac0 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x3fff6f50 ACPI: DSDT (v001 GBT GBTUACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) Detected 1607.787 MHz processor. Built 1 zonelists. Total pages: 262128 Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=493b63ac-d971-4eb8-80d7-70158beeb5ff panic=30 splash=silent resume=/dev/sdb2 bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1035208k/1048512k available (1585k kernel code, 12732k reserved, 640k data, 192k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3218.20 BogoMIPS (lpj=6436408) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e39d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 541k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. CPU0: Intel Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3215.72 BogoMIPS (lpj=6431440) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e39d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 Total of 2 processors activated (6433.92 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=63 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e0000000-e3ffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: 8000-8fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: a000-afff MEM window: e4000000-e5ffffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:1e.0 IO window: 7000-7fff MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1190919823.620:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] vesafb: framebuffer at 0xe1000000, mapped to 0xf8880000, using 10240k, total 14336k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at c000:ad80 vesafb: pmi: set display start = c00cade3, set palette = c00cae3e vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 127900 bytes,<6> error in silent jpeg. ...found (1280x1024, 22880 bytes, v3). Console: switching to colour frame buffer device 157x60 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 192k freed Executing init=/init Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: Optiarc DVD RW AD-5170A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xD402 bmdma 0xE000 irq 177 ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xDC02 bmdma 0xE008 irq 177 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488395055 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.01: ATA-7, max UDMA7, 156301488 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 16 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0xD807 Vendor: ATA Model: ST3250310AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb4 < sdb5 > sd 0:0:1:0: Attached scsi disk sdb Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 225, io mem 0xe6004000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 177 hda: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: AGP aperture is 256M @ 0x0 intel_rng: FWH not detected nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007 input: PC Speaker as /class/input/input1 ACPI: Processor [CPU0] (supports 2 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI: Processor [CPU1] (supports 2 throttling states) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: Identified chip type is 'RTL8168B/8111B'. eth0: r10001.05, the Linux device driver for Realtek Ethernet Controllers at 0xa000, 00:1a:4d:20:d8:ae, IRQ 177 Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter Driver version:1.05 Released date:2006/10/25 Link Status:Linked Link Speed:100Mbps Duplex mode:Full-Duplex I/O Base:0xA000(I/O port) IRQ:177 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1b.0 to 64 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000b800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000bc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 3 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 usb 4-2: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using uhci_hcd and address 2 Real Time Clock Driver v1.12ac usb 5-1: configuration #1 chosen from 1 choice Floppy drive(s): fd0 is 1.44M parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] FDC 0 is a post-1991 82077 usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 3 ports detected usb 5-2.1: new full speed USB device using uhci_hcd and address 4 usb 5-2.1: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usb 5-2.2: new full speed USB device using uhci_hcd and address 5 usb 5-2.2: configuration #1 chosen from 1 choice usb 5-2.3: new full speed USB device using uhci_hcd and address 6 usb 5-2.3: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev usbcore: registered new driver hci_usb input: Genius NetScroll + Traveler as /class/input/input2 input: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:1d.2-1 input: Padix Co. Ltd. USB, 3-axis, 4-button joystick as /class/input/input3 input: USB HID v1.00 Joystick [Padix Co. Ltd. USB, 3-axis, 4-button joystick] on usb-0000:00:1d.2-2 input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input4 input: USB HID v1.11 Keyboard [Broadcom Corp BCM92045DG-Flash_UHE] on usb-0000:00:1d.3-2.2 input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input5 input: USB HID v1.11 Mouse [Broadcom Corp BCM92045DG-Flash_UHE] on usb-0000:00:1d.3-2.3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ts: Compaq touchscreen protocol output Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Adding 3140696k swap on /dev/sdb2. Priority:-1 extents:1 across:3140696k EXT3 FS on sdb1, internal journal device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sdb5, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.7) UDF-fs: No VRS found ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A intel_rng: FWH not detected bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 127900 bytes,<6> error in silent jpeg. ...found (1280x1024, 22880 bytes, v3). bootsplash: status on console 1 changed to on ============================================================================= вот содержимое /proc/interrupts ============================================================================= CPU0 CPU1 0: 1338224 0 IO-APIC-edge timer 1: 3689 0 IO-APIC-edge i8042 6: 3 0 IO-APIC-edge floppy 7: 0 0 IO-APIC-edge parport0 8: 1 0 IO-APIC-edge rtc 9: 1 0 IO-APIC-level acpi 14: 138 0 IO-APIC-edge ide0 169: 1143915 0 IO-APIC-level HDA Intel, uhci_hcd:usb5, nvidia 177: 30567 0 IO-APIC-level libata, uhci_hcd:usb3, eth0 217: 40375 0 IO-APIC-level uhci_hcd:usb4 225: 5 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 NMI: 0 0 LOC: 1323421 1323438 ERR: 0 MIS: 0 ============================================================================= -- Mike Shuvalov