From: Dmitry Ananyev <d.ananyev@gmail.com> To: ALT Linux Community <community@lists.altlinux.org> Subject: Re: [Comm] Скорость мыши в КДЕ? Date: Wed, 16 Aug 2006 22:42:19 +0400 Message-ID: <44E3670B.1020901@gmail.com> (raw) In-Reply-To: <20060816074651.GC14990@procyon.home> Sergey Vlasov wrote: > On Wed, Aug 16, 2006 at 12:39:07AM +0400, Dmitry Ananyev wrote: >> Как сменить скорость мыши в КДЕ? У меня мышь из набора Logitech S510 >> очень быстро ездиет (для меня). До этого была проводная МХ310 - отлично >> двигалась. > > В Compact 3.0 (в contrib) и в Сизифе есть пакет logitech_applet - эта > утилита позволяет переключать режимы работы некоторых мышей Logitech. > Правда, именно этой модели там в списке нет, но попробовать можно. > Поставил, только она как то странно работает. Ошибок не выводит,. и ничего не выводит, Ни когда ставишь значение, ни когда просишь показать :( > Если устройство не определится, покажите, что в /proc/bus/usb/devices. > А как узнать - определилось или нет? Прилагаю то что вывелось ----------------------------------------------- T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.16-std26-up-alt9 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.3 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.16-std26-up-alt9 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 34/900 us ( 4%), #Int= 2, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.16-std26-up-alt9 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c513 Rev=32.00 S: Manufacturer=Logitech S: Product=USB Receiver C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 98mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=8ms I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=8ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.16-std26-up-alt9 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.16-std26-up-alt9 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms ------------------------------------------------ >> В КДЕ есть "ускорение" у мыши , которое можно менять. Но оно не меняется >> ниже 1х. с 1х всё ещё быстро. > > Значит, проблема не в ускорении, а в разрешении сенсора. Ну да. Вот только как поменять это разрешение - не понятно. Пробывал в xorg.conf писать там где про мышь - options resolution 200/400/800 и т.д - нулевой эффект.
next prev parent reply other threads:[~2006-08-16 18:42 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-08-15 20:39 Dmitry Ananyev 2006-08-16 7:46 ` Sergey Vlasov 2006-08-16 18:42 ` Dmitry Ananyev [this message] 2006-08-16 19:22 ` Sergey Vlasov 2006-08-16 21:02 ` Dmitry Ananyev 2006-08-17 6:31 ` Sergey Vlasov 2006-08-17 16:02 ` Dmitry Ananyev 2006-08-16 21:24 ` Dmitry Ananyev 2006-08-17 6:36 ` Sergey Vlasov 2006-08-17 16:04 ` Dmitry Ananyev 2006-08-18 9:36 ` Alexey I. Froloff 2006-08-23 21:23 ` Vitaly Lipatov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=44E3670B.1020901@gmail.com \ --to=d.ananyev@gmail.com \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git