From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-KWF-FilterProgress: * Message-ID: <44BD3FF3.5000306@mail.ru> Date: Wed, 19 Jul 2006 00:09:23 +0400 From: odergimiy User-Agent: Mozilla/5.0 (X11; U; Linux i686; ru-RU; rv:1.7.2) Gecko/20040808 X-Accept-Language: ru-ru, ru MIME-Version: 1.0 To: hihin@rambler.ru, ALT Linux Community References: <44BCF939.9040104@mail.ru> <44BD1D8B.3080200@mail.ru> <44BD22DE.4020900@mail.ru> <200607182249.45723@ruslandh> In-Reply-To: <200607182249.45723@ruslandh> X-Enigmail-Version: 0.85.0.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: 8bit X-Mailman-Approved-At: Wed, 19 Jul 2006 09:31:47 +0400 Subject: Re: [Comm] =?koi8-r?b?8M/EztHU2CBVU0I=?= X-BeenThere: community@lists.altlinux.org X-Mailman-Version: 2.1.7 Precedence: list Reply-To: ALT Linux Community List-Id: ALT Linux Community List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 18 Jul 2006 20:10:17 -0000 Archived-At: List-Archive: List-Post: Хихин Руслан пишет: >Здравствуйте odergimiy > В сообщении от 18 июля 2006 22:05 odergimiy написал(a): > > quakeR пишет: > > >Какая мать, чипсет? > > > > мать Asus P4R800VM > > > > чипсет Ati > > Заранее извеняюсь, скидываю полный dmesg дабы не упустить чего то важного. [root@localhost scorp]# modprobe ehci-hcd [root@localhost scorp]# dmesg 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-22, 1-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2394.4979 MHz. ..... host bus clock speed is 99.7705 MHz. cpu: 0, clocks: 997705, slice: 498852 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI-1132: *** Error: Method execution failed [\GPRW] (Node c154da60), AE_NOT_EXIST ACPI-1132: *** Error: Method execution failed [\_SB_.PCI0.SBRG.UAR1._PRW] (Node c1550dc0), AE_NOT_EXIST ACPI-0153: *** Error: Method execution failed [\_SB_.PCI0.SBRG.UAR1._PRW] (Node c1550dc0), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:14.1 Transparent bridge - PCI device 1002:4342 (ATI Technologies Inc) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) PCI: Probing PCI hardware 00:00:14[A] -> 1-16 -> IRQ 16 level low 00:00:14[B] -> 1-17 -> IRQ 17 level low 00:00:13[A] -> 1-19 -> IRQ 19 level low 00:02:08[A] -> 1-18 -> IRQ 18 level low number of MP IRQ sources: 16. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 B1 11 001 01 1 1 0 1 0 1 1 B9 12 001 01 1 1 0 1 0 1 1 C9 13 001 01 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 001 01 0 1 0 1 0 1 1 A9 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ21 -> 0:21 .................................... done. PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xe0000000, mapped to 0xdc809000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:534b vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1024x768, 68332 bytes, v2). Console: switching to colour frame buffer device 106x34 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 00:14.1 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio hda: ST3120022A, ATA DISK drive blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff) hdc: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hda3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 166k freed VFS: Mounted root (romfs filesystem) readonly. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 136k freed Executing init=/sbin/init Adding Swap: 248968k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal Real Time Clock Driver v1.10f ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset cp1251 MSDOS FS: Using codepage 866 NTFS driver 2.1.6b [Flags: R/O MODULE]. NTFS-fs warning (device 03:01): parse_options(): Option iocharset is deprecated. Please use option nls= in the future. NTFS-fs error (device 03:01): parse_options(): Unrecognized mount option codepage. subfs: subfs-2.4 version 0.9. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xdcba6000, IRQ 19 usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xdcba8000, IRQ 19 usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 00:13.2: irq 19, pci mem dcbb0000 usb.c: new USB bus registered, assigned bus number 3 ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb.c: USB disconnect on device 00:13.0-0 address 1 usb.c: USB bus 1 deregistered usb.c: USB disconnect on device 00:13.1-0 address 1 usb.c: USB bus 2 deregistered ehci_hcd 00:13.2: remove state 3 usb.c: USB disconnect on device 00:13.2-0 address 1 usb.c: USB bus 3 deregistered usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub inserting floppy driver for 2.4.26-std-up-alt6 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 00:13.2: irq 19, pci mem dcc83000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-ohci.c: USB OHCI at membase 0xdce1e000, IRQ 19 usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xdce20000, IRQ 19 usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 3 ports detected parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). /dev/vmmon[1949]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[1949]: Module vmmon: initialized slmdm: version 2.7.10 Feb 4 2003 15:18:20 (Smart Link Ltd.). slmdm: country set is 0xb5 (USA). Smart Link AMRMO modem. /dev/vmnet: open called by PID 1976 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: peer interface eth0 not found, will wait for it to come up bridge-eth0: attached /dev/vmnet: open called by PID 2004 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened divert: allocating divert_blk for vmnet1 /dev/vmnet: open called by PID 2005 (vmnet-netifup) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened divert: allocating divert_blk for vmnet8 /dev/vmnet: open called by PID 2003 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 2031 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 0 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 1 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 2 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 3 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 4 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 5 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 6 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 7 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 8 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 9 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 10 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 11 changed to on SCSI subsystem driver Revision: 1.00 /dev/vmnet: open called by PID 2291 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[2301]: host clock rate change request 0 -> 19 /dev/vmmon[2301]: host clock rate change request 19 -> 83 Loading Lucent Modem Controller driver version 8.26 Detected Parameters Irq=16 BaseAddress=0xe800 ComAddress=0xefe0 Lucent Modem Interface driver version 8.26 (2002-11-04) with SHARE_IRQ enabled ttyLT00 at 0xe800 (irq = 16) is a Lucent Modem CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 PPP BSD Compression module registered PPP Deflate Compression module registered divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 /dev/vmmon[2291]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 22810 pages from vm driver d09b4000 vmmon: Had to deallocate AWE 3664 pages from vm driver d09b4000 /dev/vmnet: open called by PID 3019 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[3034]: host clock rate change request 0 -> 19 /dev/vmmon[3034]: host clock rate change request 19 -> 83 /dev/vmmon[3019]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 12191 pages from vm driver d40fe000 vmmon: Had to deallocate AWE 3687 pages from vm driver d40fe000 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 hdc: attached ide-cdrom driver. hdc: ATAPI 22X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet /dev/vmnet: open called by PID 4324 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[4334]: host clock rate change request 0 -> 19 /dev/vmmon[4334]: host clock rate change request 19 -> 83 divert: not allocating divert_blk for non-ethernet device ppp0 /dev/vmmon[4324]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 21379 pages from vm driver cd63f000 vmmon: Had to deallocate AWE 3683 pages from vm driver cd63f000 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 [root@localhost scorp]# modprobe usb-uhci /lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o: insmod /lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o failed /lib/modules/2.4.26-std-up-alt6/kernel/drivers/usb/host/usb-uhci.o: insmod usb-uhci failed [root@localhost scorp]# dmesg I0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:14.1 Transparent bridge - PCI device 1002:4342 (ATI Technologies Inc) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) PCI: Probing PCI hardware 00:00:14[A] -> 1-16 -> IRQ 16 level low 00:00:14[B] -> 1-17 -> IRQ 17 level low 00:00:13[A] -> 1-19 -> IRQ 19 level low 00:02:08[A] -> 1-18 -> IRQ 18 level low number of MP IRQ sources: 16. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 B1 11 001 01 1 1 0 1 0 1 1 B9 12 001 01 1 1 0 1 0 1 1 C9 13 001 01 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 001 01 0 1 0 1 0 1 1 A9 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ21 -> 0:21 .................................... done. PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xe0000000, mapped to 0xdc809000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:534b vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1024x768, 68332 bytes, v2). Console: switching to colour frame buffer device 106x34 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 00:14.1 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio hda: ST3120022A, ATA DISK drive blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff) hdc: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hda3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 166k freed VFS: Mounted root (romfs filesystem) readonly. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 136k freed Executing init=/sbin/init Adding Swap: 248968k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal Real Time Clock Driver v1.10f ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset cp1251 MSDOS FS: Using codepage 866 NTFS driver 2.1.6b [Flags: R/O MODULE]. NTFS-fs warning (device 03:01): parse_options(): Option iocharset is deprecated. Please use option nls= in the future. NTFS-fs error (device 03:01): parse_options(): Unrecognized mount option codepage. subfs: subfs-2.4 version 0.9. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xdcba6000, IRQ 19 usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xdcba8000, IRQ 19 usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 00:13.2: irq 19, pci mem dcbb0000 usb.c: new USB bus registered, assigned bus number 3 ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb.c: USB disconnect on device 00:13.0-0 address 1 usb.c: USB bus 1 deregistered usb.c: USB disconnect on device 00:13.1-0 address 1 usb.c: USB bus 2 deregistered ehci_hcd 00:13.2: remove state 3 usb.c: USB disconnect on device 00:13.2-0 address 1 usb.c: USB bus 3 deregistered usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub inserting floppy driver for 2.4.26-std-up-alt6 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 00:13.2: irq 19, pci mem dcc83000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-ohci.c: USB OHCI at membase 0xdce1e000, IRQ 19 usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xdce20000, IRQ 19 usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 3 ports detected parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). /dev/vmmon[1949]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[1949]: Module vmmon: initialized slmdm: version 2.7.10 Feb 4 2003 15:18:20 (Smart Link Ltd.). slmdm: country set is 0xb5 (USA). Smart Link AMRMO modem. /dev/vmnet: open called by PID 1976 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: peer interface eth0 not found, will wait for it to come up bridge-eth0: attached /dev/vmnet: open called by PID 2004 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened divert: allocating divert_blk for vmnet1 /dev/vmnet: open called by PID 2005 (vmnet-netifup) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened divert: allocating divert_blk for vmnet8 /dev/vmnet: open called by PID 2003 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 2031 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 0 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 1 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 2 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 3 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 4 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 5 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 6 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 7 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 8 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 9 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 10 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 11 changed to on SCSI subsystem driver Revision: 1.00 /dev/vmnet: open called by PID 2291 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[2301]: host clock rate change request 0 -> 19 /dev/vmmon[2301]: host clock rate change request 19 -> 83 Loading Lucent Modem Controller driver version 8.26 Detected Parameters Irq=16 BaseAddress=0xe800 ComAddress=0xefe0 Lucent Modem Interface driver version 8.26 (2002-11-04) with SHARE_IRQ enabled ttyLT00 at 0xe800 (irq = 16) is a Lucent Modem CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 PPP BSD Compression module registered PPP Deflate Compression module registered divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 /dev/vmmon[2291]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 22810 pages from vm driver d09b4000 vmmon: Had to deallocate AWE 3664 pages from vm driver d09b4000 /dev/vmnet: open called by PID 3019 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[3034]: host clock rate change request 0 -> 19 /dev/vmmon[3034]: host clock rate change request 19 -> 83 /dev/vmmon[3019]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 12191 pages from vm driver d40fe000 vmmon: Had to deallocate AWE 3687 pages from vm driver d40fe000 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 hdc: attached ide-cdrom driver. hdc: ATAPI 22X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet /dev/vmnet: open called by PID 4324 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[4334]: host clock rate change request 0 -> 19 /dev/vmmon[4334]: host clock rate change request 19 -> 83 divert: not allocating divert_blk for non-ethernet device ppp0 /dev/vmmon[4324]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 21379 pages from vm driver cd63f000 vmmon: Had to deallocate AWE 3683 pages from vm driver cd63f000 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 hub.c: new USB device 00:13.2-4, assigned address 2 usb.c: USB device not accepting new address=2 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 3 usb.c: USB device not accepting new address=3 (error=-71) /dev/vmnet: open called by PID 4808 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[4818]: host clock rate change request 0 -> 19 /dev/vmmon[4818]: host clock rate change request 19 -> 83 hub.c: new USB device 00:13.2-4, assigned address 4 usb.c: USB device not accepting new address=4 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 5 usb.c: USB device not accepting new address=5 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 6 usb.c: USB device not accepting new address=6 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 7 usb.c: USB device not accepting new address=7 (error=-71) Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. hub.c: new USB device 00:13.2-1, assigned address 8 usb.c: USB device not accepting new address=8 (error=-71) hub.c: new USB device 00:13.2-1, assigned address 9 usb.c: USB device not accepting new address=9 (error=-71) hub.c: new USB device 00:13.2-2, assigned address 10 usb.c: USB device not accepting new address=10 (error=-71) hub.c: new USB device 00:13.2-2, assigned address 11 usb.c: USB device not accepting new address=11 (error=-71) usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug 3 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:13.2-1, assigned address 12 usb.c: USB device not accepting new address=12 (error=-71) hub.c: new USB device 00:13.2-1, assigned address 13 usb.c: USB device not accepting new address=13 (error=-71) usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug 3 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver [root@localhost scorp]# modprobe usb-ohci [root@localhost scorp]# dmesg Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) PCI: Probing PCI hardware 00:00:14[A] -> 1-16 -> IRQ 16 level low 00:00:14[B] -> 1-17 -> IRQ 17 level low 00:00:13[A] -> 1-19 -> IRQ 19 level low 00:02:08[A] -> 1-18 -> IRQ 18 level low number of MP IRQ sources: 16. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 B1 11 001 01 1 1 0 1 0 1 1 B9 12 001 01 1 1 0 1 0 1 1 C9 13 001 01 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 001 01 0 1 0 1 0 1 1 A9 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ21 -> 0:21 .................................... done. PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xe0000000, mapped to 0xdc809000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:534b vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1024x768, 68332 bytes, v2). Console: switching to colour frame buffer device 106x34 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 00:14.1 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio hda: ST3120022A, ATA DISK drive blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff) hdc: _NEC CD-RW NR-7900A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, UDMA(100) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hda3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 166k freed VFS: Mounted root (romfs filesystem) readonly. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 136k freed Executing init=/sbin/init Adding Swap: 248968k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal Real Time Clock Driver v1.10f ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset cp1251 MSDOS FS: Using codepage 866 NTFS driver 2.1.6b [Flags: R/O MODULE]. NTFS-fs warning (device 03:01): parse_options(): Option iocharset is deprecated. Please use option nls= in the future. NTFS-fs error (device 03:01): parse_options(): Unrecognized mount option codepage. subfs: subfs-2.4 version 0.9. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xdcba6000, IRQ 19 usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xdcba8000, IRQ 19 usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 00:13.2: irq 19, pci mem dcbb0000 usb.c: new USB bus registered, assigned bus number 3 ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb.c: USB disconnect on device 00:13.0-0 address 1 usb.c: USB bus 1 deregistered usb.c: USB disconnect on device 00:13.1-0 address 1 usb.c: USB bus 2 deregistered ehci_hcd 00:13.2: remove state 3 usb.c: USB disconnect on device 00:13.2-0 address 1 usb.c: USB bus 3 deregistered usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub inserting floppy driver for 2.4.26-std-up-alt6 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 00:13.2: irq 19, pci mem dcc83000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-ohci.c: USB OHCI at membase 0xdce1e000, IRQ 19 usb-ohci.c: usb-00:13.0, PCI device 1002:4347 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xdce20000, IRQ 19 usb-ohci.c: usb-00:13.1, PCI device 1002:4348 (ATI Technologies Inc) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 3 ports detected parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). /dev/vmmon[1949]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[1949]: Module vmmon: initialized slmdm: version 2.7.10 Feb 4 2003 15:18:20 (Smart Link Ltd.). slmdm: country set is 0xb5 (USA). Smart Link AMRMO modem. /dev/vmnet: open called by PID 1976 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: peer interface eth0 not found, will wait for it to come up bridge-eth0: attached /dev/vmnet: open called by PID 2004 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened divert: allocating divert_blk for vmnet1 /dev/vmnet: open called by PID 2005 (vmnet-netifup) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened divert: allocating divert_blk for vmnet8 /dev/vmnet: open called by PID 2003 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 2031 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 0 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 1 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 2 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 3 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 4 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 5 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 6 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 7 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 8 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 9 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 10 changed to on Looking for splash picture.... found (1024x768, 13684 bytes, v2). Splash status on console 11 changed to on SCSI subsystem driver Revision: 1.00 /dev/vmnet: open called by PID 2291 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[2301]: host clock rate change request 0 -> 19 /dev/vmmon[2301]: host clock rate change request 19 -> 83 Loading Lucent Modem Controller driver version 8.26 Detected Parameters Irq=16 BaseAddress=0xe800 ComAddress=0xefe0 Lucent Modem Interface driver version 8.26 (2002-11-04) with SHARE_IRQ enabled ttyLT00 at 0xe800 (irq = 16) is a Lucent Modem CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 PPP BSD Compression module registered PPP Deflate Compression module registered divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 /dev/vmmon[2291]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 22810 pages from vm driver d09b4000 vmmon: Had to deallocate AWE 3664 pages from vm driver d09b4000 /dev/vmnet: open called by PID 3019 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[3034]: host clock rate change request 0 -> 19 /dev/vmmon[3034]: host clock rate change request 19 -> 83 /dev/vmmon[3019]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 12191 pages from vm driver d40fe000 vmmon: Had to deallocate AWE 3687 pages from vm driver d40fe000 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 hdc: attached ide-cdrom driver. hdc: ATAPI 22X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet /dev/vmnet: open called by PID 4324 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[4334]: host clock rate change request 0 -> 19 /dev/vmmon[4334]: host clock rate change request 19 -> 83 divert: not allocating divert_blk for non-ethernet device ppp0 /dev/vmmon[4324]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 21379 pages from vm driver cd63f000 vmmon: Had to deallocate AWE 3683 pages from vm driver cd63f000 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 hub.c: new USB device 00:13.2-4, assigned address 2 usb.c: USB device not accepting new address=2 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 3 usb.c: USB device not accepting new address=3 (error=-71) /dev/vmnet: open called by PID 4808 (vmware-vmx) /dev/vmnet: port on hub 8 successfully opened /dev/vmmon[4818]: host clock rate change request 0 -> 19 /dev/vmmon[4818]: host clock rate change request 19 -> 83 hub.c: new USB device 00:13.2-4, assigned address 4 usb.c: USB device not accepting new address=4 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 5 usb.c: USB device not accepting new address=5 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 6 usb.c: USB device not accepting new address=6 (error=-71) hub.c: new USB device 00:13.2-4, assigned address 7 usb.c: USB device not accepting new address=7 (error=-71) Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. hub.c: new USB device 00:13.2-1, assigned address 8 usb.c: USB device not accepting new address=8 (error=-71) hub.c: new USB device 00:13.2-1, assigned address 9 usb.c: USB device not accepting new address=9 (error=-71) hub.c: new USB device 00:13.2-2, assigned address 10 usb.c: USB device not accepting new address=10 (error=-71) hub.c: new USB device 00:13.2-2, assigned address 11 usb.c: USB device not accepting new address=11 (error=-71) usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug 3 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:13.2-1, assigned address 12 usb.c: USB device not accepting new address=12 (error=-71) hub.c: new USB device 00:13.2-1, assigned address 13 usb.c: USB device not accepting new address=13 (error=-71) usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug 3 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver /dev/vmmon[4808]: host clock rate change request 83 -> 0 vmmon: Had to deallocate locked 12300 pages from vm driver c5645000 vmmon: Had to deallocate AWE 2821 pages from vm driver c5645000 Вот.