* [Comm] USB PC Camera <<Labtec>> -- это работает?
@ 2005-12-29 0:05 spider
2005-12-29 13:17 ` Artem Pastukhov
0 siblings, 1 reply; 2+ messages in thread
From: spider @ 2005-12-29 0:05 UTC (permalink / raw)
To: ALT Linux Community
Вот принесли ВЕБ-камеру Labtec.
Включил ее в порт:
> Dec 28 23:51:48 zepp kernel: hub.c: new USB device 00:1d.0-2,
> assigned address 3
> Dec 28 23:51:48 zepp kernel: usb.c: USB device 3 (vend/prod
> 0x46d/0x92b) is not claimed by any active driver.
Поискал в инете
> 2.3.5. Logitech (formerly Connectix) Quickcam Support
>
> The QuickCam VC USB and parallel port model webcams are supported by the
> driver offered here. A kernel patch and recompile are necessary for
> support of this model.
>
> The Quickcam driver is represented by two different projects that offer
> two different flavors of driver for certain Quickcam models, both of
> which are stand-alone drivers that do not require a kernel patch or
> recompile. The qce-ga and qc-usb drivers support the following models:
>
> * Labtec Webcam
>
Поискал quickcam в репозитории и нашел sane. Эта labtec в принципе есть
still capture device, так что может и сэйн ее и заведет, однако, как я
понимаю, есть в природе модули qcamvc и usb-qcamvc, которые поддержат
video4linux. Однако, ключевая фраза <<A kernel patch and recompile are
necessary for support of this model>> меня как-то разжижает -- здесь
категорически народ выступает против переконфигурирования ядер на
коленке. И что делать?
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Comm] USB PC Camera <<Labtec>> -- это работает?
2005-12-29 0:05 [Comm] USB PC Camera <<Labtec>> -- это работает? spider
@ 2005-12-29 13:17 ` Artem Pastukhov
0 siblings, 0 replies; 2+ messages in thread
From: Artem Pastukhov @ 2005-12-29 13:17 UTC (permalink / raw)
To: ALT Linux Community
С Logitech дровами какие-то траблы, раньше были. потом их демонстративно
забросили.
В сообщении от 29 Декабрь 2005 03:05 spider написал(a):
> Вот принесли ВЕБ-камеру Labtec.
>
> Включил ее в порт:
> > Dec 28 23:51:48 zepp kernel: hub.c: new USB device 00:1d.0-2,
> >
> > assigned address 3
> >
> > Dec 28 23:51:48 zepp kernel: usb.c: USB device 3 (vend/prod
> >
> > 0x46d/0x92b) is not claimed by any active driver.
>
> Поискал в инете
>
> > 2.3.5. Logitech (formerly Connectix) Quickcam Support
> >
> > The QuickCam VC USB and parallel port model webcams are supported by the
> > driver offered here. A kernel patch and recompile are necessary for
> > support of this model.
> >
> > The Quickcam driver is represented by two different projects that offer
> > two different flavors of driver for certain Quickcam models, both of
> > which are stand-alone drivers that do not require a kernel patch or
> > recompile. The qce-ga and qc-usb drivers support the following models:
> >
> > * Labtec Webcam
>
> Поискал quickcam в репозитории и нашел sane. Эта labtec в принципе есть
> still capture device, так что может и сэйн ее и заведет, однако, как я
> понимаю, есть в природе модули qcamvc и usb-qcamvc, которые поддержат
> video4linux. Однако, ключевая фраза <<A kernel patch and recompile are
> necessary for support of this model>> меня как-то разжижает -- здесь
> категорически народ выступает против переконфигурирования ядер на
> коленке. И что делать?
>
>
>
>
>
> _______________________________________________
> Community mailing list
> Community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
--
С уважением Артем Пастухов, past at yam dot ru
YAM International
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-12-29 13:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-12-29 0:05 [Comm] USB PC Camera <<Labtec>> -- это работает? spider
2005-12-29 13:17 ` Artem Pastukhov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git