From: Roman Savochenko <rom_as@diyaorg.dp.ua>
To: community@altlinux.ru
Subject: Re: [Comm] master 2.4 & mppe
Date: Mon, 06 Jun 2005 16:04:23 +0300
Message-ID: <42A449D7.6050507@diyaorg.dp.ua> (raw)
In-Reply-To: <1214688002.20050601141117@lugaport.net>
Dank Bagryantsev пишет:
>
> RVT> Чему верить ?
>
> у меня работает...
>
> у меня в modules.conf добавлено:
> alias char-major-108 ppp_generic
> alias ppp-compress-18 ppp_mppe
> alias ppp-compress-21 bsd_comp
> alias ppp-compress-24 ppp_deflate
> alias ppp-compress-26 ppp_deflate
> alias tty-ldisc-3 ppp_async
> alias tty-ldisc-14 ppp_synctty
>
> но я не думаю, что все это нужно для MPPE :)
> так, по "наследству" добавляется... :)
>
> в options.pptpd :
> lock
> debug
> name pptpd
> #proxyarp
> bsdcomp 0
>
> -chap
> -mschap
> +mschap-v2
> #+mppe
> -mppe-128
> +mppe-40
> -pap
>
> #ms-dns xxx.xxx.xxx.xxx
> #ms-dns yyy.yyy.yyy.yyy
>
> nodefaultroute
> auth
> #plugin radius.so
>
> lcp-echo-failure 5
> lcp-echo-interval 30
>
>
> Попробуйте, и результат "в студию"
Вот результат:
//------------------------------------------------------------------
Jun 6 12:58:54 dig pppd[2887]: using channel 39
Jun 6 12:58:54 dig pppd[2887]: Using interface ppp0
Jun 6 12:58:54 dig pppd[2887]: Connect: ppp0 <--> /dev/pts/2
Jun 6 12:58:54 dig pppoe[3000]: PADS: Service-Name: ''
Jun 6 12:58:54 dig pppoe[3000]: PPP session is 1026
Jun 6 12:58:54 dig pppd[2887]: rcvd [LCP ConfReq id=0xd <pcomp> <magic
0x51eca360> <auth chap MS-v2>]
Jun 6 12:58:54 dig pppd[2887]: sent [LCP ConfReq id=0x19 <mru 1492>
<magic 0x73e7ed47>]
Jun 6 12:58:54 dig pppd[2887]: sent [LCP ConfRej id=0xd <pcomp>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [LCP ConfAck id=0x19 <mru 1492>
<magic 0x73e7ed47>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [LCP ConfReq id=0xe <magic
0x51eca360> <auth chap MS-v2>]
Jun 6 12:58:54 dig pppd[2887]: sent [LCP ConfAck id=0xe <magic
0x51eca360> <auth chap MS-v2>]
Jun 6 12:58:54 dig pppd[2887]: sent [LCP EchoReq id=0x0 magic=0x73e7ed47]
Jun 6 12:58:54 dig pppd[2887]: rcvd [CHAP Challenge id=0x1
<bb1e683bdcaad4571bcc8f5d4ab86c13>, name = ""]
Jun 6 12:58:54 dig pppd[2887]: sent [CHAP Response id=0x1
<a25611dbb67cedb90bc87e19f5a82a1400000000000000007ed477f20072d8cfa9053aa9879fadc1c4bf4e011832b60900>,
name = "clb018"]
Jun 6 12:58:54 dig pppd[2887]: rcvd [LCP EchoRep id=0x0 magic=0x51eca360]
Jun 6 12:58:54 dig pppd[2887]: rcvd [CHAP Success id=0x1
"S=265068BBF46ED987A51F3BEBBD9C09BD81D4B832"]
Jun 6 12:58:54 dig pppd[2887]: sent [IPCP ConfReq id=0x17 <addr
0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [IPCP ConfReq id=0xc <addr
192.168.64.1> <compress VJ 0f 00>]
Jun 6 12:58:54 dig pppd[2887]: sent [IPCP ConfRej id=0xc <compress VJ
0f 00>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [CCP ConfReq id=0x9 <mppe +H -M +S
+L -D -C>]
Jun 6 12:58:54 dig pppd[2887]: sent [LCP ProtRej id=0x1a 80 fd 01 09 00
0a 12 06 01 00 00 60]
Jun 6 12:58:54 dig pppd[2887]: rcvd [IPCP ConfRej id=0x17 <ms-dns3
0.0.0.0>]
Jun 6 12:58:54 dig pppd[2887]: sent [IPCP ConfReq id=0x18 <addr
0.0.0.0> <ms-dns1 0.0.0.0>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [IPCP ConfReq id=0xd <addr
192.168.64.1>]
Jun 6 12:58:54 dig pppd[2887]: sent [IPCP ConfAck id=0xd <addr
192.168.64.1>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [CCP TermReq id=0xa]
Jun 6 12:58:54 dig pppd[2887]: sent [LCP ProtRej id=0x1b 80 fd 05 0a 00 04]
Jun 6 12:58:54 dig pppd[2887]: rcvd [IPCP ConfReq id=0xe <addr
192.168.64.1> <compress VJ 0f 00>]
Jun 6 12:58:54 dig pppd[2887]: sent [IPCP ConfRej id=0xe <compress VJ
0f 00>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [IPCP ConfNak id=0x18 <addr
192.168.66.8> <ms-dns1 212.3.111.66>]
Jun 6 12:58:54 dig pppd[2887]: sent [IPCP ConfReq id=0x19 <addr
192.168.66.8> <ms-dns1 212.3.111.66>]
Jun 6 12:58:54 dig pppd[2887]: rcvd [LCP TermReq id=0xf]
Jun 6 12:58:54 dig pppd[2887]: LCP terminated by peer
Jun 6 12:58:54 dig pppd[2887]: sent [LCP TermAck id=0xf]
Jun 6 12:58:54 dig pppoe[3000]: Session 1026 terminated -- received
PADT from peer
Jun 6 12:58:54 dig pppoe[3000]: Sent PADT
Jun 6 12:58:54 dig pppd[2887]: Script /usr/sbin/pppoe -p
/var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 finished
(pid 3000), status = 0x0
Jun 6 12:58:54 dig pppd[2887]: Modem hangup
Jun 6 12:58:54 dig pppd[2887]: Connection terminated.
//---------------------------------------------------------------------------------
С уважением Роман!
next prev parent reply other threads:[~2005-06-06 13:04 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-31 15:05 Roman V. Tutov
2005-05-31 17:22 ` Roman Savochenko
2005-06-01 5:58 ` Re[2]: " Roman V. Tutov
2005-06-01 10:00 ` Dank Bagryantsev
2005-06-01 10:22 ` Re[2]: " Roman V. Tutov
2005-06-01 10:27 ` Re[3]: " Anton Gorlov
2005-06-01 10:33 ` Re[4]: " Roman V. Tutov
2005-06-01 10:38 ` Vasya Makarov
2005-06-01 10:45 ` Re[2]: " Roman V. Tutov
2005-06-01 11:11 ` Re[3]: " Dank Bagryantsev
2005-06-01 11:48 ` Re[4]: " Roman V. Tutov
2005-06-01 12:32 ` Valery V. Inozemtsev
2005-06-01 12:43 ` Re[5]: " Dank Bagryantsev
2005-06-02 6:07 ` Vladimir V Kamarzin
2005-06-02 6:13 ` Re[2]: " Roman V. Tutov
2005-06-02 7:31 ` Vasya Makarov
2005-06-02 13:25 ` Re[2]: " Roman V. Tutov
2005-06-06 10:39 ` Roman Savochenko
2005-06-06 13:04 ` Roman Savochenko [this message]
2005-06-01 10:39 ` Re[5]: " Anton Gorlov
2005-06-01 10:37 ` mult1k
2005-06-01 12:41 ` [Comm] " max
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42A449D7.6050507@diyaorg.dp.ua \
--to=rom_as@diyaorg.dp.ua \
--cc=community@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git