* [Comm] nut
@ 2004-12-28 14:29 Дворников Михаил
0 siblings, 0 replies; only message in thread
From: Дворников Михаил @ 2004-12-28 14:29 UTC (permalink / raw)
To: community
UPS фирмы Powercom KP625AP.
Не могу заставить работать nut из Мастер 2.4
Мои настройки.
/etc/nut/ups.conf:
[powercom]
driver = powercom
port = /dev/ttyS0
type = KP625AP
В логах пишет, про ошибки соединения кабель->ups
powercom[2283]: data receiving error (-1 instead of 16 bytes)
/etc/nut/upsd.conf:
ACL all 0.0.0.0/0
ACL localhost 127.0.0.1/32
ACCEPT localhost
REJECT all
/etc/nut/@upsd.users
[upsmon]
password = 1
allowfrom = localhost
upsmon master
upsd и upsdrv запускаются, upsmon выдает ошибку -->
# upsmon
Network UPS Tools upsmon 2.0.0
Unable to use old-style MONITOR line without a username
Convert it and add a username to upsd.users - see the documentation
Fatal error: unusable configuration
--
С уважением, Дворников Михаил.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-12-28 14:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-12-28 14:29 [Comm] nut Дворников Михаил
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git