* [Comm] connect speed
@ 2004-11-19 17:39 Мар'ян Петришин
2004-11-19 17:46 ` Andrey Rahmatullin
2004-11-19 19:04 ` Yuriy Gomenyuk
0 siblings, 2 replies; 8+ messages in thread
From: Мар'ян Петришин @ 2004-11-19 17:39 UTC (permalink / raw)
To: community
Привет.
Можна ли как-то принудительно задать модему скорость соединения?
Какая АТ команда для этого используется (если вообще существует)?
Большое спасибо за помощь.
--------------------------
С уважением, Мар'ян Петришин
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] connect speed
2004-11-19 17:39 [Comm] connect speed Мар'ян Петришин
@ 2004-11-19 17:46 ` Andrey Rahmatullin
2004-11-19 18:13 ` Мар'ян Петришин
2004-11-19 19:04 ` Yuriy Gomenyuk
1 sibling, 1 reply; 8+ messages in thread
From: Andrey Rahmatullin @ 2004-11-19 17:46 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 516 bytes --]
On Fri, Nov 19, 2004 at 07:39:55PM +0200, Мар'ян Петришин wrote:
> Можна ли как-то принудительно задать модему скорость соединения?
> Какая АТ команда для этого используется (если вообще существует)?
От модема зависит, вобще-то. ИМХО.
--
WBR, wRAR (ALT Linux Team)
Powered by the ALT Linux fortune(8):
<gvy> rider, можешь объяснить, чем тебе не нравится BOOT?
<gvy> т.е. чем это лучше поддержки закаканного ядра в mainline
<rider> gvy: чем закаканного ? Твоими выражениями ?
<gvy> тьфу
<gvy> s/к/х/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] connect speed
2004-11-19 17:46 ` Andrey Rahmatullin
@ 2004-11-19 18:13 ` Мар'ян Петришин
2004-11-19 19:16 ` Aleksey Avdeev
2004-11-20 7:41 ` Dolgov OV
0 siblings, 2 replies; 8+ messages in thread
From: Мар'ян Петришин @ 2004-11-19 18:13 UTC (permalink / raw)
To: community
Andrey Rahmatullin wrote:
> On Fri, Nov 19, 2004 at 07:39:55PM +0200, Мар'ян Петришин wrote:
>
>>Можна ли как-то принудительно задать модему скорость соединения?
>>Какая АТ команда для этого используется (если вообще существует)?
>
> От модема зависит, вобще-то. ИМХО.
Acorp 56000 ext на dialin сервере и USRobotics Sportster 33600 у меня
дома. Вопрос возник поточу что сколько я ни пробую коннект всегда 26400,
причем на разных линиях.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] connect speed
2004-11-19 18:13 ` Мар'ян Петришин
@ 2004-11-19 19:16 ` Aleksey Avdeev
2004-11-19 19:22 ` Мар'ян Петришин
2004-11-20 7:41 ` Dolgov OV
1 sibling, 1 reply; 8+ messages in thread
From: Aleksey Avdeev @ 2004-11-19 19:16 UTC (permalink / raw)
To: community
Мар'ян Петришин пишет:
> Andrey Rahmatullin wrote:
>
>> On Fri, Nov 19, 2004 at 07:39:55PM +0200, Мар'ян Петришин wrote:
>>
>>> Можна ли как-то принудительно задать модему скорость соединения?
>>> Какая АТ команда для этого используется (если вообще существует)?
>>
>>
>> От модема зависит, вобще-то. ИМХО.
>
> Acorp 56000 ext на dialin сервере и USRobotics Sportster 33600 у меня
> дома. Вопрос возник поточу что сколько я ни пробую коннект всегда 26400,
> причем на разных линиях.
Аппаратный PCI модем? Если да - попробуйте настроить его порт
как высокоскоростной (мне помогло указание, через setserial, что
порт spd_hi или выше).
--
С уважением. Алексей.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] connect speed
2004-11-19 19:16 ` Aleksey Avdeev
@ 2004-11-19 19:22 ` Мар'ян Петришин
0 siblings, 0 replies; 8+ messages in thread
From: Мар'ян Петришин @ 2004-11-19 19:22 UTC (permalink / raw)
To: community
Aleksey Avdeev wrote:
> Мар'ян Петришин пишет:
>
>> Andrey Rahmatullin wrote:
>>
>>> On Fri, Nov 19, 2004 at 07:39:55PM +0200, Мар'ян Петришин wrote:
>>>
>>>> Можна ли как-то принудительно задать модему скорость соединения?
>>>> Какая АТ команда для этого используется (если вообще существует)?
>>>
>>>
>>>
>>> От модема зависит, вобще-то. ИМХО.
>>
>>
>> Acorp 56000 ext на dialin сервере и USRobotics Sportster 33600 у меня
>> дома. Вопрос возник поточу что сколько я ни пробую коннект всегда
>> 26400, причем на разных линиях.
>
>
> Аппаратный PCI модем? Если да - попробуйте настроить его порт как
> высокоскоростной (мне помогло указание, через setserial, что порт spd_hi
> или выше).
>
Оба внешние. Скорость установленна в 115200, так что с этим проблем нету.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] connect speed
2004-11-19 18:13 ` Мар'ян Петришин
2004-11-19 19:16 ` Aleksey Avdeev
@ 2004-11-20 7:41 ` Dolgov OV
2004-11-20 16:31 ` Мар'ян Петришин
1 sibling, 1 reply; 8+ messages in thread
From: Dolgov OV @ 2004-11-20 7:41 UTC (permalink / raw)
To: community
On Fri, 19 Nov 2004 20:13:20 +0200
Мар'ян Петришин <maryanp@ukr.net> wrote:
> > От модема зависит, вобще-то. ИМХО.
> Acorp 56000 ext на dialin сервере и USRobotics Sportster 33600 у меня
> дома. Вопрос возник поточу что сколько я ни пробую коннект всегда
> 26400, причем на разных линиях.
У меня Zyxel Comet3356. На днях тоже этим озадачивался.
Покопавшись в руководстве, превратил строку инициализации в следующую:
В Кррр:
Строка1: AT&FE0V1&C1S95=255
Строка2: ATS0=0S30=18L1M1&K6V1&D2N0+MS=11,0,26400,33600
^^^^^ ^^^^^^^^^^^^^^^^^^^^^
Параметр S30=18 для вкуса (если 18х10сек. данные не бегают - кладем
трубку).
А вот N0+MS=11,0,26400,33600 говорит модему не определять самому
протокол, а установить принудительно v.42 и зажать скорость соединения в
рамки 26400-33600. Если сторона провайдера не может уложиться в этот
диапазон (ну там помехи в линии), просто получаю NO CARRIER и
перезваниваю.
--
С наилучшими,
Олег Долгов
<dov AT media-link DOT info>
Registered Linux user #315454
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] connect speed
2004-11-20 7:41 ` Dolgov OV
@ 2004-11-20 16:31 ` Мар'ян Петришин
0 siblings, 0 replies; 8+ messages in thread
From: Мар'ян Петришин @ 2004-11-20 16:31 UTC (permalink / raw)
To: community
Dolgov OV wrote:
> On Fri, 19 Nov 2004 20:13:20 +0200
> Мар'ян Петришин <maryanp@ukr.net> wrote:
>
>>>От модема зависит, вобще-то. ИМХО.
>>
>>Acorp 56000 ext на dialin сервере и USRobotics Sportster 33600 у меня
>>дома. Вопрос возник поточу что сколько я ни пробую коннект всегда
>>26400, причем на разных линиях.
>
>
> У меня Zyxel Comet3356. На днях тоже этим озадачивался.
> Покопавшись в руководстве, превратил строку инициализации в следующую:
> В Кррр:
> Строка1: AT&FE0V1&C1S95=255
> Строка2: ATS0=0S30=18L1M1&K6V1&D2N0+MS=11,0,26400,33600
> ^^^^^ ^^^^^^^^^^^^^^^^^^^^^
> Параметр S30=18 для вкуса (если 18х10сек. данные не бегают - кладем
> трубку).
> А вот N0+MS=11,0,26400,33600 говорит модему не определять самому
> протокол, а установить принудительно v.42 и зажать скорость соединения в
> рамки 26400-33600. Если сторона провайдера не может уложиться в этот
> диапазон (ну там помехи в линии), просто получаю NO CARRIER и
> перезваниваю.
Вчера ночью делал тоже самое, кроме NO CARRIER ничего. Но 26400
стабильно с очень хорошим качеством. Больше выжать не удается. Настройки
устанавливал с обоих концов. Попробую завтра менять кровень сигнала до
-5...0 дБ. Большое спасибо за ответ - думаю я на правильном пути.
С уважением и благодарностью, Мар'ян Петришин.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] connect speed
2004-11-19 17:39 [Comm] connect speed Мар'ян Петришин
2004-11-19 17:46 ` Andrey Rahmatullin
@ 2004-11-19 19:04 ` Yuriy Gomenyuk
1 sibling, 0 replies; 8+ messages in thread
From: Yuriy Gomenyuk @ 2004-11-19 19:04 UTC (permalink / raw)
To: community
On Fri, 19 Nov 2004 19:39:55 +0200
Мар'ян Петришин <maryanp@ukr.net> wrote:
> Можна ли как-то принудительно задать модему скорость соединения?
> Какая АТ команда для этого используется (если вообще существует)?
AT... команды (как правило).
Смотрите в руководстве к модему.
--
С уважением,
Юрий Гоменюк.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Powered by Sylpheed 0.8.8 under ALT Linux Master 2.2
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2004-11-20 16:31 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-11-19 17:39 [Comm] connect speed Мар'ян Петришин
2004-11-19 17:46 ` Andrey Rahmatullin
2004-11-19 18:13 ` Мар'ян Петришин
2004-11-19 19:16 ` Aleksey Avdeev
2004-11-19 19:22 ` Мар'ян Петришин
2004-11-20 7:41 ` Dolgov OV
2004-11-20 16:31 ` Мар'ян Петришин
2004-11-19 19:04 ` Yuriy Gomenyuk
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git