[Comm] Анонимный доступ в samba

[Comm] Анонимный доступ в samba

[Yury Aliaev]

Приветствую всех!

Продолжаю настраивать самбу... Такая вот проблемка: не получается 
установить анонимный доступ на директории. В файле /etc/samba/smb.conf 
есть такие строчки:

[discC]
     guest account = nobody
     comment = C:
     hide dot files = no
     map hidden = yes
     printable = no
     path = /mnt/discC
     public = yes
     guest only = yes

[discD]
     guest account = nobody
     comment = D:
     hide dot files = no
     map hidden = yes
     printable = no
     path = /mnt/discD
     public = yes
     guest only = yes

[CDROM]
     guest account = nobody
     comment = E:
     hide dot files = no
     map hidden = yes
     printable = no
     path = /mnt/cdrom
     public = yes
     guest only = yes

Кроме того имеется пользователь nobody без пароля, и несколько 
пользователей с паролями. Так вот, когда заходишь с машины под Windows 
из-под пользователя, зарегистрированного в Самбе, то всё нормально: 
видны и приведённые выше точки доступа, и домашний каталог 
соответствующего пользователя. А если зайти из-под пользователя, не 
прописанного в Самбе, то при попытке зайти на линуксную машину сразу 
спрашивается пароль (непонятно какой), и анонимный доступ невозможен. 
Просьба натолкнуть на путь истинный.

С уважением,
Юрий

Re: [Comm] Анонимный доступ в samba

[Oleg Pan]

Hello Yury,

Monday, September 20, 2004, 6:41:43 PM, you wrote:

> Приветствую всех!


> Просьба натолкнуть на путь истинный.


security = share


-- 
Best regards,
 Oleg                            mailto:wacom@narod.ru

Re: [Comm] Анонимный доступ в samba

[Sasha Martsinuk]

On Sep 20 18:41, Yury Aliaev wrote:

> Продолжаю настраивать самбу... Такая вот проблемка: не получается 
> установить анонимный доступ на директории. В файле /etc/samba/smb.conf 
> есть такие строчки:

skip

> Кроме того имеется пользователь nobody без пароля, и несколько 
> пользователей с паролями. Так вот, когда заходишь с машины под Windows 
> из-под пользователя, зарегистрированного в Самбе, то всё нормально: 
> видны и приведённые выше точки доступа, и домашний каталог 
> соответствующего пользователя. А если зайти из-под пользователя, не 
> прописанного в Самбе, то при попытке зайти на линуксную машину сразу 
> спрашивается пароль (непонятно какой), и анонимный доступ невозможен. 
> Просьба натолкнуть на путь истинный.

[global]
map to guest = Bad Password

WBR, 
Sasha aka mr.Scamp
			    mailto:sasha@sasha.rv.ua

Re: [Comm] Анонимный доступ в samba

[Yury Aliaev]

Oleg Pan пишет:
> Hello Yury,
> 
> Monday, September 20, 2004, 6:41:43 PM, you wrote:
> 
> 
>>Приветствую всех!
> 
> 
> 
>>Просьба натолкнуть на путь истинный.
> 
> 
> 
> security = share
> 
> 
Не помогло :(

Re: [Comm] Анонимный доступ в samba

[Yury Aliaev]

Sasha Martsinuk пишет:

>>Продолжаю настраивать самбу... Такая вот проблемка: не получается 
>>установить анонимный доступ на директории. В файле /etc/samba/smb.conf 
> 
> 
> [global]
> map to guest = Bad Password
> 

Тоже мимо :( В том числе и в комбинации с предыдущим советом.

Re: [Comm] Анонимный доступ в samba

[Mike Lykov]

В сообщении от Четверг 23 Сентябрь 2004 12:45 Yury Aliaev написал:
> > [global]
> > map to guest = Bad Password
> Тоже мимо :( В том числе и в комбинации с предыдущим советом.

[global]
security = user 
map to guest = bad user 
idmap uid = 10000-15000                                                                             
idmap gid = 10000-15000 

[public]                                                                                            
   comment = Public Stuff                                                                           
   path = /home/samba/public                                                                        
   public = yes                                                                                     
   writable = no                                                                                    
   guest ok = yes 

может, так?

-- 
Mike Lykov
Samara, "Vesna" parfum company, System administrator 

Re: [Comm] Анонимный доступ в samba

[Yury Aliaev]

Mike Lykov пишет:
> В сообщении от Четверг 23 Сентябрь 2004 12:45 Yury Aliaev написал:
> 
>>>[global]
>>>map to guest = Bad Password
>>
>>Тоже мимо :( В том числе и в комбинации с предыдущим советом.
> 
> 
> [global]
> security = user 
> map to guest = bad user 
> idmap uid = 10000-15000                                                                             
> idmap gid = 10000-15000 
> 
> [public]                                                                                            
>    comment = Public Stuff                                                                           
>    path = /home/samba/public                                                                        
>    public = yes                                                                                     
>    writable = no                                                                                    
>    guest ok = yes 
> 
> может, так?
> 
Увы :( Ладно, видимо, пришло время доки читать :)

RE: [Comm] Анонимный доступ в samba

[Кучумов А.А.]

> -----Original Message-----
> From: community-bounces@altlinux.ru [mailto:community-bounces@altlinux.ru]
> On Behalf Of Yury Aliaev
> Sent: Thursday, September 23, 2004 12:22 PM
> To: community@altlinux.ru
> Subject: Re: [Comm] Анонимный доступ в samba
> 
> Увы :( Ладно, видимо, пришло время доки читать :)

Я, помнится, тоже долго возился, хотя проблема была несколько другая.
Через два дня выяснилось, что проблема не в Samba. К файлам-то будут
обращаться все равно от имени какого-то локального пользователя.
А у него локальные права на это есть? Те которые chmod выставляются?

Если их не хочется править, то можно force user и force group в самбе
прописать.

С уважением, Кучумов А.А.

Re: [Comm] Анонимный доступ в samba

[Victor P. Vyatkin]

Кучумов А.А. пишет:

>>-----Original Message-----
>>From: community-bounces@altlinux.ru [mailto:community-bounces@altlinux.ru]
>>On Behalf Of Yury Aliaev
>>Sent: Thursday, September 23, 2004 12:22 PM
>>To: community@altlinux.ru
>>Subject: Re: [Comm] Анонимный доступ в samba
>>
>>Увы :( Ладно, видимо, пришло время доки читать :)
>>    
>>
Напимер так всем и все можно:
[global]
   workgroup = GROUP
   security = share

[public]
   path = /var/samba
   public = yes
   writable = yes
   directory mode = 755

$ chmod 777  /var/samba

-- 
Best regards,
 Victor Vyatkin

Re: [Comm] Анонимный доступ в samba

[Yury Aliaev]

[-- Attachment #1: Type: text/plain, Size: 692 bytes --]

Victor P. Vyatkin пишет:

> Напимер так всем и все можно:
> [global]
>   workgroup = GROUP
>   security = share
> 
> [public]
>   path = /var/samba
>   public = yes
>   writable = yes
>   directory mode = 755
> 
> $ chmod 777  /var/samba
> 

Дык и так и этак делал много раз... Сейчас присылаю свой 
/etc/samba/smb.conf, прошу умных людей посмотреть и сказать, что здесь 
не так, и как это нужно исправить.

P.S. Ситуация прежняя: имеются два "нормальных" пользователя Самбы 
--,mutabor и sinich,-- и у них всё нормально: открывается и домашний 
каталог, и общие (только на чтение). А вот остальных просто не пускает: 
спрашивает пароль сразу при попытке зайти на машину.

С уважением, Юрий.

[-- Attachment #2: smb.conf --]
[-- Type: text/plain, Size: 19388 bytes --]


# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = SUN

# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
;  netbios name = <name_of_this_server>

# server string is the equivalent of the NT Description field
   server string =  Samba server on %h (v. %v)

# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s

# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in ALT Linux by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   printcap name = cups
;   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
;   printing = cups

# Samba 3.0 supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to 
# enable it below.
# This parameter works like domain admin group:
# printer admin = @<group> <user>
;   printer admin = @adm

# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Set the log (verbosity) level (0 <= log level <= 10)
; log level = 3

# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
;   hosts allow = 192.168.1.

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
  guest account = pcguest

# Security mode. Most people will want user level security. See
# security_level.txt for details.
# With winbind security should be 'user', 'domain' or 'ads' (for Active Directory)
# It is strongly recommended to run winbindd, even on PDC in order to
# optimize performance
#   security = user
   security = share
   map to guest = bad user
   idmap uid = 10000 - 15000
   idmap gid = 10000 - 15000   

# Active Directory support requires following options properly set up
# Please read ADS-related chapter in Samba HOWTO Collection before dealing with them!
;	password server = <ads server name>
;	realm = <FULLY.QUALIFIED.REALM.DOMAIN>

# Use password server option only with security = server or security = domain
# When using security = domain, you should use password server = *
;   password server = <NT-Server-Name>
;   password server = *

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT domain
# The smbpasswd file is only required by a server doing authentication, thus
# members of a domain do not need one.
# Please remember: ADS management *requires* passwords to be encrypted
;  encrypt passwords = yes
;  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
;*passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's 
# and gid's. winbind uid and winbind gid are the only required parameters.
#
# winbind uid is the range of uid's winbind can use when mapping RIDs to uid's
;  winbind uid = 10000-20000
#
# winbind gid is the range of uid's winbind can use when mapping RIDs to gid's
;  winbind gid = 10000-20000
#
# winbind separator is the character a user must use between their domain
# name and username, defaults to "\"
;  winbind separator = @
# winbind use default domain is switch which forces winbind to treat users
# without domain as members of default domain (set in smb.conf)
# Default is False
;  winbind use default domain = False
#
#
# template homedir determines the home directory for winbind users, with 
# %D expanding to their domain name and %U expanding to their username.
# Make sure that PAM-entry for application which uses pam_winbind is able 
# to auto-create those directories using something like pam_mkhomedir. Also, make sure
# that domain (%D) directory do exist in advance as pam_mkhomedir does not create it
;  template homedir = /home/%D/%U
#
# template shell determines the shell users authenticated by winbind get
;  template shell = /bin/bash

# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See Samba HOWTO Collection and the manual pages for details
   socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable for client (33)
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roaming profiles for WinNT and Win2k
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Where to store roaming profiles for Win9x. Be careful with this as it also
# impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile

# The add user script is used by a domain member to add local user accounts
# that have been authenticated by the domain controller, or by the domain
# controller to add local machine accounts when adding machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a group.
# Script for domain controller for adding machines:
; add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M %u
# Script for domain member for adding local accounts for authenticated users:
; add user script = /usr/sbin/useradd -s /bin/false %u

# Domain groups:
# Domain groups are handled by 'net groupmap' instead of smb.conf, 
# read net(8) for more

# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
#
name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: CP437 (US, default), CP737 (GREEK), CP850 (Latin1 - Western European),
# CP852 (Eastern Eu.), CP861 (Icelandic), CP866 (Cyrillic - Russian),
# CP932 (Japanese - Shift-JIS), CP936 (Simpl. Chinese), CP949 (Korean Hangul),
# CP950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.), 
# CP1251 (Belarusian/Bulgarian), KOI8-U (Ukrainian)
# Basically, all charsets, supported by iconv(3) are permitted here
# See iconv -l for complete list of encodings
# Note that UTF8 is also supported and Samba3 defaults to it in unix and display charsets.
# This is an example for Russian users:
;   dos charset = CP866
;   unix charset = KOI8-R
;   display charset = KOI8-R

# Use sendfile to speed up ReadX and similar requests
# Note that this would not work for Win9X client, 
# you should disable this option if you're using Win9X
    use sendfile = yes
    

#============================ Share Definitions ==============================
;[homes]
;   comment = Home Directory for '%u'
;   browseable = no
;   writable = yes

[discC]
#    guest account = nobody
    comment = C:
    hide dot files = no
    map hidden = yes
    printable = no
    path = /mnt/discC
    public = yes
#    guest only = yes
    guest ok = yes
    writable = no

[discD]
    guest account = nobody
    comment = D:
    hide dot files = no
    map hidden = yes
    printable = no
    path = /mnt/discD
    public = yes
#    guest only = yes
    guest ok = yes
    writable = no

[CDROM]
    guest account = nobody
    comment = E:
    hide dot files = no
    map hidden = yes
    printable = no
    path = /mnt/cdrom
    public = yes
#    guest only = yes
    guest ok = yes
    writable = no

[mutabor-home]
    comment = home dir for mutabor
    writable = yes
    valid users = mutabor
    path = /home/mutabor
    
[sinich-home]
    comment = home dir for sinich
    writable = yes
    valid users = sinich
    path = /home/sinich
    

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /var/lib/samba/netlogon
;   guest ok = yes
;   writable = no

#Uncomment the following 2 lines if you would like your login scripts to
#be created dynamically by ntlogon (check that you have it in the correct
#location (the default of the ntlogon rpm available in contribs)
;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon
;root postexec = rm -f /var/lib/samba/netlogon/%U.bat

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /var/lib/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a CUPS print system there is no need to 
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to swap the 'print command' line below with the commented one.
;[printers]
;   comment = All Printers
;   path = /var/spool/samba
;   browseable = no
# to allow user 'guest account' to print.
;   guest ok = yes
;   writable = no
;   printable = yes
;   create mode = 0700
# =====================================
# print command: see above for details.
# =====================================
;   print command = lpr-cups -P %p -o raw %s -r   # using client side printer drivers.
;;   print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
;   lpq command = lpq -P %p
;   lprm command = cancel %p-%j

# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/docs/Samba-HOWTO-Collection.pdf 
;[print$]
;   path = /var/lib/samba/printers
;   browseable = yes
;   read only = yes
;   write list = @adm root

# This is 'a must' when you'd like to support quotas on your shares.
# Quotas are set up per mount point and can be changed from Win2K/XP/2K3
# Explorer's share 'properties' dialog when browsing the share as Domain Admin. 
# Quotas are supported and tested on Ext2/3 and XFS file systems.
# It is important to represent mount point as 'drive' share (C$/D$/etc)
# otherwise Win2K/XP/2K3 would not issue proper RPC calls.
# Note also that domain separator should be exact as set above for winbind
;[C$]
;   comment = Administrative share for homes
;   path = /home
;   admin users = @"DOMAIN\\Domain Admins"
;   valid users = @"DOMAIN\\Domain Admins"
;   writable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;  path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba/public
;   public = yes
;   writable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by Fred. Spool data will be placed in Fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by Fred. Note that Fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

Re: [Comm] Анонимный доступ в samba

[Dmitriy Zakalyuzhniy]

On Thu, 23 Sep 2004 16:49:33 +0400
Yury Aliaev <mutab0r@rambler.ru> wrote:

В smb.conf на открытый доступ должно быть (из Samba-3 How-To Collection):

[global]
workgroup =QWE
server string = Samba Server
printcap name = /etc/printcap
load printers = yes
log file = /var/log/samba/smbd.log
security = share
passdb backend = guest
dns proxy = no 

[public]
comment = Public Stuff
path = /home/samba
public = yes
read only = no
guest only = yes

Работает на моей самбе3:
samba-client-3.0.6-2.fc2
samba-common-3.0.6-2.fc2

-- 
С уважением,
Дмитрий Закалюжный

Re: [Comm] Анонимный доступ в samba

[Yury Aliaev]

[-- Attachment #1: Type: text/plain, Size: 680 bytes --]

Dmitriy Zakalyuzhniy пишет:
> 
> В smb.conf на открытый доступ должно быть (из Samba-3 How-To Collection):
> 
> [global]
> workgroup =QWE
> server string = Samba Server
> printcap name = /etc/printcap
> load printers = yes
> log file = /var/log/samba/smbd.log
> security = share
> passdb backend = guest
> dns proxy = no 
> 
> [public]
> comment = Public Stuff
> path = /home/samba
> public = yes
> read only = no
> guest only = yes
> 
> Работает на моей самбе3:
> samba-client-3.0.6-2.fc2
> samba-common-3.0.6-2.fc2
> 

Спасибо! Уже легче: стал работать анонимный доступ. Но... отрубился 
доступ к домашним каталогам пользователей, который ранее работал. Мой 
smb.conf прилагаю.

[-- Attachment #2: smb.conf --]
[-- Type: text/plain, Size: 995 bytes --]

[global]
workgroup = SUN
server string = Samba Server
;log file = /var/log/samba/smbd.log
security = share
passdb backend = guest
dns proxy = no 

;[public]
;comment = Public Stuff
;path = /mnt/discC
;public = yes
;read only = yes
;guest only = yes

[discC]
    comment = C:
    hide dot files = no
    map hidden = yes
    printable = no
    path = /mnt/discC
    public = yes
    guest only = yes
    writable = no

[discD]
    comment = D:
    hide dot files = no
    map hidden = yes
    printable = no
    path = /mnt/discD
    public = yes
    guest only = yes
    writable = no

[CDROM]
    comment = E:
    hide dot files = no
    map hidden = yes
    printable = no
    path = /mnt/cdrom
    public = yes
    guest only = yes
    writable = no

[mutabor-home]
    comment = home dir for mutabor
    writable = yes
    valid users = mutabor
    path = /home/mutabor
    
[sinich-home]
    comment = home dir for sinich
    writable = yes
    valid users = sinich
    path = /home/sinich