* [Comm] flash usb-drive @ 2004-05-07 7:42 Alexey Morsov 2004-05-07 7:38 ` Nizamov Shavkat 2004-05-07 8:34 ` Alexander Kuprin 0 siblings, 2 replies; 7+ messages in thread From: Alexey Morsov @ 2004-05-07 7:42 UTC (permalink / raw) To: community Привет, Есть flashdrive Apacer, вставлен в USB, отдетектился и прописался в /etc/fstab тока монтироваться он не хочет - пишет mount: wrong fs type, bad option, bad superblock on /dev/sda1, or too many mounted file systems В fstab за ним числиться vfat... чаво ему может быть надо? -- Всего наилучшего, Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ" Алексей Морсов http://www.ricom.ru http://www.fondmarket.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive 2004-05-07 7:42 [Comm] flash usb-drive Alexey Morsov @ 2004-05-07 7:38 ` Nizamov Shavkat 2004-05-07 8:34 ` Alexander Kuprin 1 sibling, 0 replies; 7+ messages in thread From: Nizamov Shavkat @ 2004-05-07 7:38 UTC (permalink / raw) To: community > > В fstab за ним числиться vfat... чаво ему может быть надо? > vfat - это фат32 тогда как флешки чаще всего просто fat (msdos) ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive 2004-05-07 7:42 [Comm] flash usb-drive Alexey Morsov 2004-05-07 7:38 ` Nizamov Shavkat @ 2004-05-07 8:34 ` Alexander Kuprin 2004-05-07 9:43 ` Alexey Morsov 1 sibling, 1 reply; 7+ messages in thread From: Alexander Kuprin @ 2004-05-07 8:34 UTC (permalink / raw) To: community On Friday 07 May 2004 10:42, Alexey Morsov wrote: > Есть flashdrive Apacer, > вставлен в USB, отдетектился и прописался в /etc/fstab тока > монтироваться он не хочет - пишет > > mount: wrong fs type, bad option, bad superblock on /dev/sda1, > or too many mounted file systems > > В fstab за ним числиться vfat... чаво ему может быть надо? Там ошибка есть -- в /etc/fstab в опциях прописывается kudzu. А опции kudzu mount не понимает -- о чём и сообщает в логах при попытке монтирования. Удалите kudzu -- должно заработать. -- WBR, Alexander Kuprin ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive 2004-05-07 8:34 ` Alexander Kuprin @ 2004-05-07 9:43 ` Alexey Morsov 2004-05-07 10:50 ` Alexander Kuprin 0 siblings, 1 reply; 7+ messages in thread From: Alexey Morsov @ 2004-05-07 9:43 UTC (permalink / raw) To: community Alexander Kuprin wrote: > On Friday 07 May 2004 10:42, Alexey Morsov wrote: > >>Есть flashdrive Apacer, >>вставлен в USB, отдетектился и прописался в /etc/fstab тока >>монтироваться он не хочет - пишет >> >>mount: wrong fs type, bad option, bad superblock on /dev/sda1, >> or too many mounted file systems >> >>В fstab за ним числиться vfat... чаво ему может быть надо? > > > Там ошибка есть -- в /etc/fstab в опциях прописывается kudzu. А опции kudzu > mount не понимает -- о чём и сообщает в логах при попытке монтирования. > Удалите kudzu -- должно заработать. удалял, прописывал root, user, alex - тоже самое... sda тоже перебирал... А вообще я счас пытаюсь его руками замаунтить - для чистоты - тоже не прокатывает > > -- > WBR, Alexander Kuprin > > > ------------------------------------------------------------------------ > > _______________________________________________ > Community mailing list > Community@altlinux.ru > http://lists.altlinux.ru/mailman/listinfo/community -- Всего наилучшего, Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ" Алексей Морсов http://www.ricom.ru http://www.fondmarket.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive 2004-05-07 9:43 ` Alexey Morsov @ 2004-05-07 10:50 ` Alexander Kuprin 2004-05-07 12:14 ` Alexey Morsov 0 siblings, 1 reply; 7+ messages in thread From: Alexander Kuprin @ 2004-05-07 10:50 UTC (permalink / raw) To: community On Friday 07 May 2004 12:43, Alexey Morsov wrote: > удалял, прописывал root, user, alex - тоже самое... > sda тоже перебирал... > А вообще я счас пытаюсь его руками замаунтить - для чистоты - > тоже не прокатывает Тогда проверьте следующее -- сервис usb запущен? service usb status Кстати, один из способов проверить обнаружено ли (и подсоединено) SCSI-устройство -- это запустить утилиту cdrecord с ключом -scanbus (возможно существует другая утилита, более правильная для этих целей :) Вот, что показывает cdrecord на моей машине: [root@p4 init.d]# cdrecord -scanbus Cdrecord 2.0 (i586-alt-linux-gnu) Copyright (C) 1995-2002 JЖrg Schilling Linux sg driver version: 3.1.25 Using libscg version 'schily-0.7' scsibus0: 0,0,0 0) 'SONY ' 'DVD-ROM DDU1621 ' 'S2.9' Removable CD-ROM 0,1,0 1) 'LITE-ON ' 'LTR-52246S ' '6S0D' Removable CD-ROM scsibus1: 1,0,0 100) 'Memorex ' 'ThumbDrive ' '1.11' Removable Disk И если Вы обнаружили флешку и знаете имя устройства, то чтобы выяснить список разделов, воспользуйтесь утилитой fdisk: [root@p4 init.d]# fdisk -l /dev/sda Disk /dev/sda: 132 MB, 132120576 bytes 16 heads, 32 sectors/track, 504 cylinders Units = cylinders of 512 * 512 = 262144 bytes Device Boot Start End Blocks Id System /dev/sda1 1 504 129008 83 Linux Хм.. Правда свою флешку я переразметил -- вместо раздела FAT создал Linux Native. -- WBR, Alexander Kuprin ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive 2004-05-07 10:50 ` Alexander Kuprin @ 2004-05-07 12:14 ` Alexey Morsov 2004-05-07 12:59 ` Alexander Kuprin 0 siblings, 1 reply; 7+ messages in thread From: Alexey Morsov @ 2004-05-07 12:14 UTC (permalink / raw) To: community Alexander Kuprin wrote: > > Тогда проверьте следующее -- сервис usb запущен? > > service usb status Есть иной вариант проверки? потому что в dmesg Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. hub.c: new USB device 00:07.2-1, assigned address 2 scsi0 : SCSI emulation for USB Mass Storage devices Vendor: USB Model: Flash Drive Rev: 1.12 Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 253949 512-byte hdwr sectors (130 MB) sda: Write Protect is off sda: sda1 sda2 sda3 sda4 inserting floppy driver for 2.4.22-1.2115.nptl Floppy drive(s): fd0 is 1.44M было когда я сделал modprobe usb-storage > > Кстати, один из способов проверить обнаружено ли (и подсоединено) > SCSI-устройство -- это запустить утилиту cdrecord с ключом -scanbus (возможно > существует другая утилита, более правильная для этих целей :) Вот, что > показывает cdrecord на моей машине: > > [root@p4 init.d]# cdrecord -scanbus > Cdrecord 2.0 (i586-alt-linux-gnu) Copyright (C) 1995-2002 JЖrg Schilling > Linux sg driver version: 3.1.25 > Using libscg version 'schily-0.7' > scsibus0: > 0,0,0 0) 'SONY ' 'DVD-ROM DDU1621 ' 'S2.9' Removable CD-ROM > 0,1,0 1) 'LITE-ON ' 'LTR-52246S ' '6S0D' Removable CD-ROM > scsibus1: > 1,0,0 100) 'Memorex ' 'ThumbDrive ' '1.11' Removable Disk > > И если Вы обнаружили флешку и знаете имя устройства, то чтобы выяснить список > разделов, воспользуйтесь утилитой fdisk: > > [root@p4 init.d]# fdisk -l /dev/sda > > Disk /dev/sda: 132 MB, 132120576 bytes > 16 heads, 32 sectors/track, 504 cylinders > Units = cylinders of 512 * 512 = 262144 bytes > > Device Boot Start End Blocks Id System > /dev/sda1 1 504 129008 83 Linux > А вот мой Disk /dev/sda: 130 MB, 130021888 bytes 4 heads, 62 sectors/track, 1023 cylinders Units = cylinders of 248 * 512 = 126976 bytes Device Boot Start End Blocks Id System /dev/sda1 ? 911530 911530 5 6e Unknown Partition 1 has different physical/logical beginnings (non-Linux?): phys=(357, 119, 40) logical=(911529, 2, 46) Partition 1 has different physical/logical endings: phys=(357, 32, 50) logical=(911529, 2, 55) Partition 1 does not end on cylinder boundary. /dev/sda2 5363646 7536938 269488144 0 Empty Partition 2 has different physical/logical beginnings (non-Linux?): phys=(0, 0, 0) logical=(5363645, 3, 47) Partition 2 has different physical/logical endings: phys=(0, 0, 0) logical=(7536937, 1, 42) Partition 2 does not end on cylinder boundary. /dev/sda3 ? 2173345 7811905 699181456 53 OnTrack DM6 Aux3 Partition 3 has different physical/logical beginnings (non-Linux?): phys=(345, 32, 19) logical=(2173344, 1, 18) Partition 3 has different physical/logical endings: phys=(324, 77, 19) logical=(7811904, 1, 49) Partition 3 does not end on cylinder boundary. /dev/sda4 1 8679028 1076199424 0 Empty Partition 4 has different physical/logical beginnings (non-Linux?): phys=(0, 0, 0) logical=(0, 0, 1) Partition 4 has different physical/logical endings: phys=(0, 0, 0) logical=(8679027, 2, 28) Partition 4 does not end on cylinder boundary. > Хм.. Правда свою флешку я переразметил -- вместо раздела FAT создал Linux > Native. > > -- > WBR, Alexander Kuprin > > > ------------------------------------------------------------------------ > > _______________________________________________ > Community mailing list > Community@altlinux.ru > http://lists.altlinux.ru/mailman/listinfo/community -- Всего наилучшего, Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ" Алексей Морсов http://www.ricom.ru http://www.fondmarket.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive 2004-05-07 12:14 ` Alexey Morsov @ 2004-05-07 12:59 ` Alexander Kuprin 0 siblings, 0 replies; 7+ messages in thread From: Alexander Kuprin @ 2004-05-07 12:59 UTC (permalink / raw) To: community On Friday 07 May 2004 15:14, Alexey Morsov wrote: > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > USB Mass Storage support registered. > hub.c: new USB device 00:07.2-1, assigned address 2 > scsi0 : SCSI emulation for USB Mass Storage devices > Vendor: USB Model: Flash Drive Rev: 1.12 > Type: Direct-Access ANSI SCSI revision: 02 > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 2 > Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 > SCSI device sda: 253949 512-byte hdwr sectors (130 MB) > sda: Write Protect is off > sda: sda1 sda2 sda3 sda4 ..skip.. > А вот мой > Disk /dev/sda: 130 MB, 130021888 bytes > 4 heads, 62 sectors/track, 1023 cylinders > Units = cylinders of 248 * 512 = 126976 bytes > > Device Boot Start End Blocks Id System > /dev/sda1 ? 911530 911530 5 6e Unknown > Partition 1 has different physical/logical beginnings (non-Linux?): > phys=(357, 119, 40) logical=(911529, 2, 46) > Partition 1 has different physical/logical endings: > phys=(357, 32, 50) logical=(911529, 2, 55) > Partition 1 does not end on cylinder boundary. > /dev/sda2 5363646 7536938 269488144 0 Empty ...skip... Хм... Интересно. К сожалению, мне не приходилось держать в руках большое количество "флешек" от разных производителей. Единственное, что могу посоветовать, это пересоздать под Linux'ом требуемый раздел. Но меня смущает вот это: > Disk /dev/sda: 130 MB, 130021888 bytes > 4 heads, 62 sectors/track, 1023 cylinders > Units = cylinders of 248 * 512 = 126976 bytes В то время, как на моей флеш-карте > Disk /dev/sda: 132 MB, 132120576 bytes > 16 heads, 32 sectors/track, 504 cylinders > Units = cylinders of 512 * 512 = 262144 bytes Даже не знаю. Единственное, что в голову приходит, как я уже сказал, -- переразметить под Linux'ом. Но вот поможет ли? :-\ -- WBR, Alexander Kurpin ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2004-05-07 12:59 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-05-07 7:42 [Comm] flash usb-drive Alexey Morsov 2004-05-07 7:38 ` Nizamov Shavkat 2004-05-07 8:34 ` Alexander Kuprin 2004-05-07 9:43 ` Alexey Morsov 2004-05-07 10:50 ` Alexander Kuprin 2004-05-07 12:14 ` Alexey Morsov 2004-05-07 12:59 ` Alexander Kuprin
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git