* Re: [Comm] flash usb-drive
2004-05-07 7:42 [Comm] flash usb-drive Alexey Morsov
@ 2004-05-07 7:38 ` Nizamov Shavkat
2004-05-07 8:34 ` Alexander Kuprin
1 sibling, 0 replies; 7+ messages in thread
From: Nizamov Shavkat @ 2004-05-07 7:38 UTC (permalink / raw)
To: community
>
> В fstab за ним числиться vfat... чаво ему может быть надо?
>
vfat - это фат32
тогда как флешки чаще всего просто fat (msdos)
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Comm] flash usb-drive
@ 2004-05-07 7:42 Alexey Morsov
2004-05-07 7:38 ` Nizamov Shavkat
2004-05-07 8:34 ` Alexander Kuprin
0 siblings, 2 replies; 7+ messages in thread
From: Alexey Morsov @ 2004-05-07 7:42 UTC (permalink / raw)
To: community
Привет,
Есть flashdrive Apacer,
вставлен в USB, отдетектился и прописался в /etc/fstab тока
монтироваться он не хочет - пишет
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
or too many mounted file systems
В fstab за ним числиться vfat... чаво ему может быть надо?
--
Всего наилучшего,
Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ"
Алексей Морсов
http://www.ricom.ru
http://www.fondmarket.ru
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive
2004-05-07 7:42 [Comm] flash usb-drive Alexey Morsov
2004-05-07 7:38 ` Nizamov Shavkat
@ 2004-05-07 8:34 ` Alexander Kuprin
2004-05-07 9:43 ` Alexey Morsov
1 sibling, 1 reply; 7+ messages in thread
From: Alexander Kuprin @ 2004-05-07 8:34 UTC (permalink / raw)
To: community
On Friday 07 May 2004 10:42, Alexey Morsov wrote:
> Есть flashdrive Apacer,
> вставлен в USB, отдетектился и прописался в /etc/fstab тока
> монтироваться он не хочет - пишет
>
> mount: wrong fs type, bad option, bad superblock on /dev/sda1,
> or too many mounted file systems
>
> В fstab за ним числиться vfat... чаво ему может быть надо?
Там ошибка есть -- в /etc/fstab в опциях прописывается kudzu. А опции kudzu
mount не понимает -- о чём и сообщает в логах при попытке монтирования.
Удалите kudzu -- должно заработать.
--
WBR, Alexander Kuprin
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive
2004-05-07 8:34 ` Alexander Kuprin
@ 2004-05-07 9:43 ` Alexey Morsov
2004-05-07 10:50 ` Alexander Kuprin
0 siblings, 1 reply; 7+ messages in thread
From: Alexey Morsov @ 2004-05-07 9:43 UTC (permalink / raw)
To: community
Alexander Kuprin wrote:
> On Friday 07 May 2004 10:42, Alexey Morsov wrote:
>
>>Есть flashdrive Apacer,
>>вставлен в USB, отдетектился и прописался в /etc/fstab тока
>>монтироваться он не хочет - пишет
>>
>>mount: wrong fs type, bad option, bad superblock on /dev/sda1,
>> or too many mounted file systems
>>
>>В fstab за ним числиться vfat... чаво ему может быть надо?
>
>
> Там ошибка есть -- в /etc/fstab в опциях прописывается kudzu. А опции kudzu
> mount не понимает -- о чём и сообщает в логах при попытке монтирования.
> Удалите kudzu -- должно заработать.
удалял, прописывал root, user, alex - тоже самое...
sda тоже перебирал...
А вообще я счас пытаюсь его руками замаунтить - для чистоты -
тоже не прокатывает
>
> --
> WBR, Alexander Kuprin
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Community mailing list
> Community@altlinux.ru
> http://lists.altlinux.ru/mailman/listinfo/community
--
Всего наилучшего,
Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ"
Алексей Морсов
http://www.ricom.ru
http://www.fondmarket.ru
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive
2004-05-07 9:43 ` Alexey Morsov
@ 2004-05-07 10:50 ` Alexander Kuprin
2004-05-07 12:14 ` Alexey Morsov
0 siblings, 1 reply; 7+ messages in thread
From: Alexander Kuprin @ 2004-05-07 10:50 UTC (permalink / raw)
To: community
On Friday 07 May 2004 12:43, Alexey Morsov wrote:
> удалял, прописывал root, user, alex - тоже самое...
> sda тоже перебирал...
> А вообще я счас пытаюсь его руками замаунтить - для чистоты -
> тоже не прокатывает
Тогда проверьте следующее -- сервис usb запущен?
service usb status
Кстати, один из способов проверить обнаружено ли (и подсоединено)
SCSI-устройство -- это запустить утилиту cdrecord с ключом -scanbus (возможно
существует другая утилита, более правильная для этих целей :) Вот, что
показывает cdrecord на моей машине:
[root@p4 init.d]# cdrecord -scanbus
Cdrecord 2.0 (i586-alt-linux-gnu) Copyright (C) 1995-2002 JЖrg Schilling
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'SONY ' 'DVD-ROM DDU1621 ' 'S2.9' Removable CD-ROM
0,1,0 1) 'LITE-ON ' 'LTR-52246S ' '6S0D' Removable CD-ROM
scsibus1:
1,0,0 100) 'Memorex ' 'ThumbDrive ' '1.11' Removable Disk
И если Вы обнаружили флешку и знаете имя устройства, то чтобы выяснить список
разделов, воспользуйтесь утилитой fdisk:
[root@p4 init.d]# fdisk -l /dev/sda
Disk /dev/sda: 132 MB, 132120576 bytes
16 heads, 32 sectors/track, 504 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 504 129008 83 Linux
Хм.. Правда свою флешку я переразметил -- вместо раздела FAT создал Linux
Native.
--
WBR, Alexander Kuprin
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive
2004-05-07 10:50 ` Alexander Kuprin
@ 2004-05-07 12:14 ` Alexey Morsov
2004-05-07 12:59 ` Alexander Kuprin
0 siblings, 1 reply; 7+ messages in thread
From: Alexey Morsov @ 2004-05-07 12:14 UTC (permalink / raw)
To: community
Alexander Kuprin wrote:
>
> Тогда проверьте следующее -- сервис usb запущен?
>
> service usb status
Есть иной вариант проверки?
потому что в dmesg
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:07.2-1, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: USB Model: Flash Drive Rev: 1.12
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 253949 512-byte hdwr sectors (130 MB)
sda: Write Protect is off
sda: sda1 sda2 sda3 sda4
inserting floppy driver for 2.4.22-1.2115.nptl
Floppy drive(s): fd0 is 1.44M
было когда я сделал modprobe usb-storage
>
> Кстати, один из способов проверить обнаружено ли (и подсоединено)
> SCSI-устройство -- это запустить утилиту cdrecord с ключом -scanbus (возможно
> существует другая утилита, более правильная для этих целей :) Вот, что
> показывает cdrecord на моей машине:
>
> [root@p4 init.d]# cdrecord -scanbus
> Cdrecord 2.0 (i586-alt-linux-gnu) Copyright (C) 1995-2002 JЖrg Schilling
> Linux sg driver version: 3.1.25
> Using libscg version 'schily-0.7'
> scsibus0:
> 0,0,0 0) 'SONY ' 'DVD-ROM DDU1621 ' 'S2.9' Removable CD-ROM
> 0,1,0 1) 'LITE-ON ' 'LTR-52246S ' '6S0D' Removable CD-ROM
> scsibus1:
> 1,0,0 100) 'Memorex ' 'ThumbDrive ' '1.11' Removable Disk
>
> И если Вы обнаружили флешку и знаете имя устройства, то чтобы выяснить список
> разделов, воспользуйтесь утилитой fdisk:
>
> [root@p4 init.d]# fdisk -l /dev/sda
>
> Disk /dev/sda: 132 MB, 132120576 bytes
> 16 heads, 32 sectors/track, 504 cylinders
> Units = cylinders of 512 * 512 = 262144 bytes
>
> Device Boot Start End Blocks Id System
> /dev/sda1 1 504 129008 83 Linux
>
А вот мой
Disk /dev/sda: 130 MB, 130021888 bytes
4 heads, 62 sectors/track, 1023 cylinders
Units = cylinders of 248 * 512 = 126976 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ? 911530 911530 5 6e Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 119, 40) logical=(911529, 2, 46)
Partition 1 has different physical/logical endings:
phys=(357, 32, 50) logical=(911529, 2, 55)
Partition 1 does not end on cylinder boundary.
/dev/sda2 5363646 7536938 269488144 0 Empty
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(0, 0, 0) logical=(5363645, 3, 47)
Partition 2 has different physical/logical endings:
phys=(0, 0, 0) logical=(7536937, 1, 42)
Partition 2 does not end on cylinder boundary.
/dev/sda3 ? 2173345 7811905 699181456 53 OnTrack DM6 Aux3
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(345, 32, 19) logical=(2173344, 1, 18)
Partition 3 has different physical/logical endings:
phys=(324, 77, 19) logical=(7811904, 1, 49)
Partition 3 does not end on cylinder boundary.
/dev/sda4 1 8679028 1076199424 0 Empty
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(0, 0, 0) logical=(0, 0, 1)
Partition 4 has different physical/logical endings:
phys=(0, 0, 0) logical=(8679027, 2, 28)
Partition 4 does not end on cylinder boundary.
> Хм.. Правда свою флешку я переразметил -- вместо раздела FAT создал Linux
> Native.
>
> --
> WBR, Alexander Kuprin
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Community mailing list
> Community@altlinux.ru
> http://lists.altlinux.ru/mailman/listinfo/community
--
Всего наилучшего,
Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ"
Алексей Морсов
http://www.ricom.ru
http://www.fondmarket.ru
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] flash usb-drive
2004-05-07 12:14 ` Alexey Morsov
@ 2004-05-07 12:59 ` Alexander Kuprin
0 siblings, 0 replies; 7+ messages in thread
From: Alexander Kuprin @ 2004-05-07 12:59 UTC (permalink / raw)
To: community
On Friday 07 May 2004 15:14, Alexey Morsov wrote:
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> USB Mass Storage support registered.
> hub.c: new USB device 00:07.2-1, assigned address 2
> scsi0 : SCSI emulation for USB Mass Storage devices
> Vendor: USB Model: Flash Drive Rev: 1.12
> Type: Direct-Access ANSI SCSI revision: 02
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 2
> Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sda: 253949 512-byte hdwr sectors (130 MB)
> sda: Write Protect is off
> sda: sda1 sda2 sda3 sda4
..skip..
> А вот мой
> Disk /dev/sda: 130 MB, 130021888 bytes
> 4 heads, 62 sectors/track, 1023 cylinders
> Units = cylinders of 248 * 512 = 126976 bytes
>
> Device Boot Start End Blocks Id System
> /dev/sda1 ? 911530 911530 5 6e Unknown
> Partition 1 has different physical/logical beginnings (non-Linux?):
> phys=(357, 119, 40) logical=(911529, 2, 46)
> Partition 1 has different physical/logical endings:
> phys=(357, 32, 50) logical=(911529, 2, 55)
> Partition 1 does not end on cylinder boundary.
> /dev/sda2 5363646 7536938 269488144 0 Empty
...skip...
Хм... Интересно. К сожалению, мне не приходилось держать в руках большое
количество "флешек" от разных производителей. Единственное, что могу
посоветовать, это пересоздать под Linux'ом требуемый раздел. Но меня смущает
вот это:
> Disk /dev/sda: 130 MB, 130021888 bytes
> 4 heads, 62 sectors/track, 1023 cylinders
> Units = cylinders of 248 * 512 = 126976 bytes
В то время, как на моей флеш-карте
> Disk /dev/sda: 132 MB, 132120576 bytes
> 16 heads, 32 sectors/track, 504 cylinders
> Units = cylinders of 512 * 512 = 262144 bytes
Даже не знаю. Единственное, что в голову приходит, как я уже сказал, --
переразметить под Linux'ом. Но вот поможет ли? :-\
--
WBR, Alexander Kurpin
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2004-05-07 12:59 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-05-07 7:42 [Comm] flash usb-drive Alexey Morsov
2004-05-07 7:38 ` Nizamov Shavkat
2004-05-07 8:34 ` Alexander Kuprin
2004-05-07 9:43 ` Alexey Morsov
2004-05-07 10:50 ` Alexander Kuprin
2004-05-07 12:14 ` Alexey Morsov
2004-05-07 12:59 ` Alexander Kuprin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git