* [Comm] дрожание монитора @ 2004-04-26 8:36 Dmitry Kovalsky 2004-04-26 9:43 ` Petrichev Roman 0 siblings, 1 reply; 17+ messages in thread From: Dmitry Kovalsky @ 2004-04-26 8:36 UTC (permalink / raw) To: community Привет Проблема. Система Мастер 2.2 + апдейты. Железо -- монитор Samung 959NF и video NVidia fx1100. Пытаюсь настроить разрешение 1280х1024 при частоте 85Герц (не знаю выше потянет или нет). Конфигурялка Мастера такого монитора не знает, а ближайший его сородич 955DF умеет тока 1280х1024 при 75 герцах с помошью видеогена сгенерил модлайны нужные мне. запустилось на 1280х1024 и частоте 85Гц, но теперь у меня дрожат изображение в уголках экрана. Чем это вызванно и как с этим боротся? Дима E-mail: dikov@imbg.org.ua Fax: +380 (44) 266-0759 Tel.: +380 (44) 266-5589 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] дрожание монитора 2004-04-26 8:36 [Comm] дрожание монитора Dmitry Kovalsky @ 2004-04-26 9:43 ` Petrichev Roman 2004-04-27 5:46 ` [Comm]дрожание монитора Alexey Novikov 0 siblings, 1 reply; 17+ messages in thread From: Petrichev Roman @ 2004-04-26 9:43 UTC (permalink / raw) To: community Dmitry Kovalsky wrote: > Привет > > Проблема. Система Мастер 2.2 + апдейты. Железо -- монитор Samung 959NF и > video NVidia fx1100. Пытаюсь настроить разрешение 1280х1024 при частоте > 85Герц (не знаю выше потянет или нет). > > Конфигурялка Мастера такого монитора не знает, а ближайший его сородич 955DF > умеет тока 1280х1024 при 75 герцах > > с помошью видеогена сгенерил модлайны нужные мне. запустилось на 1280х1024 и > частоте 85Гц, но теперь у меня дрожат изображение в уголках экрана. > Чем это вызванно и как с этим боротся? Неправильный modeline. Чё-то перекручено. Теперь совет на все времена :) Если на машине есть винда, поставить powerstrip, настроить монитор на нужную(max) частоту и разрешение, в Powerstrip'е взять нужные параметры для моделайна, и вписать их в конфиг иксов. Работает стопроцентно для любых мониторов. На карточках NVidia картинка в линуксе бывает чуть сдвинута вбок. Шлифуется xvidtune'ом и слегка правится конфиг. Да, чуть не забыл, в винде обязательно должны стоять дрова NVidia. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-26 9:43 ` Petrichev Roman @ 2004-04-27 5:46 ` Alexey Novikov 2004-04-27 6:02 ` Petrichev Roman ` (2 more replies) 0 siblings, 3 replies; 17+ messages in thread From: Alexey Novikov @ 2004-04-27 5:46 UTC (permalink / raw) To: community >Неправильный modeline. Чё-то перекручено. Теперь совет на все времена :) >Если на машине есть винда, поставить powerstrip, настроить монитор на >нужную(max) частоту и разрешение, в Powerstrip'е взять нужные параметры >для моделайна, и вписать их в конфиг иксов. Работает стопроцентно для >любых мониторов. На карточках NVidia картинка в линуксе бывает чуть >сдвинута вбок. Шлифуется xvidtune'ом и слегка правится конфиг. >Да, чуть не забыл, в винде обязательно должны стоять дрова NVidia. Не надо ля-ля!:) Вот простейший рецепт: 1. Ищем 3-и X-ы, а точнее /etc/XF86Config от них - там есть много разных modeline'ов, или добываем modeline'ы подходящего разрешения другим способом. 2. Берем в руки калькулятор и считаем, например # 1024x768 @ 120 Hz, 95.8 kHz hsync Modeline "1024x768" 138.00 1024 1056 1248 1440 768 771 781 802 +hsync -vsync Здесь 138.00 частота кристалла на видюхе(pixel clock) в MHz, если 138000000/1440=95833 Hz - горизонтальная развертка 138000000/1440/802=119 Hz - вертикальная развертка Все.:) -- С уважением, Алексей Новиков ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 5:46 ` [Comm]дрожание монитора Alexey Novikov @ 2004-04-27 6:02 ` Petrichev Roman 2004-04-27 8:29 ` Dmitry Kovalsky 2004-04-27 8:46 ` [Comm]дрожание монитора Nizamov Shavkat 2 siblings, 0 replies; 17+ messages in thread From: Petrichev Roman @ 2004-04-27 6:02 UTC (permalink / raw) To: community Alexey Novikov wrote: >>Неправильный modeline. Чё-то перекручено. Теперь совет на все времена :) >>Если на машине есть винда, поставить powerstrip, настроить монитор на >>нужную(max) частоту и разрешение, в Powerstrip'е взять нужные параметры >>для моделайна, и вписать их в конфиг иксов. Работает стопроцентно для >>любых мониторов. На карточках NVidia картинка в линуксе бывает чуть >>сдвинута вбок. Шлифуется xvidtune'ом и слегка правится конфиг. >>Да, чуть не забыл, в винде обязательно должны стоять дрова NVidia. > > Не надо ля-ля!:) Вот простейший рецепт: > 1. Ищем 3-и X-ы, а точнее /etc/XF86Config от них - там есть много > разных modeline'ов, или добываем modeline'ы подходящего разрешения другим > способом. > 2. Берем в руки калькулятор и считаем, например > # 1024x768 @ 120 Hz, 95.8 kHz hsync > Modeline "1024x768" 138.00 1024 1056 1248 1440 768 771 781 802 +hsync -vsync > > Здесь 138.00 частота кристалла на видюхе(pixel clock) в MHz, если > 138000000/1440=95833 Hz - горизонтальная развертка > 138000000/1440/802=119 Hz - вертикальная развертка > > Все.:) Далеко не всегда можно рассчитать правильный моделайн самостоятельно. Я со своим RoverScan'ом помучился в свое время. И очень важно знать - +hsync -vsync (или еще как иначе). А это нигде не возьмешь. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 5:46 ` [Comm]дрожание монитора Alexey Novikov 2004-04-27 6:02 ` Petrichev Roman @ 2004-04-27 8:29 ` Dmitry Kovalsky 2004-04-27 8:57 ` Petrichev Roman 2004-04-27 9:48 ` [Comm] Re: дрожание монитора Michael Shigorin 2004-04-27 8:46 ` [Comm]дрожание монитора Nizamov Shavkat 2 siblings, 2 replies; 17+ messages in thread From: Dmitry Kovalsky @ 2004-04-27 8:29 UTC (permalink / raw) To: community On Tuesday 27 April 2004 08:46, Alexey Novikov wrote: Попробую сегодня по первому способу Кстати я вспомнил что строку модлайна 1280х1024@85 я выкопал где то в инете, а если генерил сам с помошью videogenа то 1) картинка была чуть шире и б) на левом краю искажалось изображение какбудто закругленный край монитора. ПОЧЕМУ в Винде с этим нет проблем? Как виндовые средства установки разрешения нормальные так и разные утилиты нормально работают с мониторами и развертками! Лично у меня нет никакого желания сидеть с калькуляторами каждый раз при переходе с одного монитора на другой И кстати было бы неплохо если бы Мастер делал регулярные апдейты по поддержке нового железа (например те же самые мониторы для которых уже были бы модлайны) Этот мониор вышел раньше Мастера 2.2 но в списке его нет :0( Дима > >Неправильный modeline. Чё-то перекручено. Теперь совет на все времена :) > >Если на машине есть винда, поставить powerstrip, настроить монитор на > >нужную(max) частоту и разрешение, в Powerstrip'е взять нужные параметры > >для моделайна, и вписать их в конфиг иксов. Работает стопроцентно для > >любых мониторов. На карточках NVidia картинка в линуксе бывает чуть > >сдвинута вбок. Шлифуется xvidtune'ом и слегка правится конфиг. > >Да, чуть не забыл, в винде обязательно должны стоять дрова NVidia. > > Не надо ля-ля!:) Вот простейший рецепт: > 1. Ищем 3-и X-ы, а точнее /etc/XF86Config от них - там есть много > разных modeline'ов, или добываем modeline'ы подходящего разрешения другим > способом. > 2. Берем в руки калькулятор и считаем, например > # 1024x768 @ 120 Hz, 95.8 kHz hsync > Modeline "1024x768" 138.00 1024 1056 1248 1440 768 771 781 802 > +hsync -vsync > > Здесь 138.00 частота кристалла на видюхе(pixel clock) в MHz, если > 138000000/1440=95833 Hz - горизонтальная развертка > 138000000/1440/802=119 Hz - вертикальная развертка > > Все.:) -- Sincerely yours, Ph.D. Student Dmytro Kovalskyy Institute of Molecular Biology & Genetics 150 Akad. Zabolotnogo Street, Kiev-143, 03143 UKRAINE E-mail: dikov@imbg.org.ua Fax: +380 (44) 266-0759 Tel.: +380 (44) 266-5589 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 8:29 ` Dmitry Kovalsky @ 2004-04-27 8:57 ` Petrichev Roman 2004-04-27 9:17 ` Mike Lykov ` (3 more replies) 2004-04-27 9:48 ` [Comm] Re: дрожание монитора Michael Shigorin 1 sibling, 4 replies; 17+ messages in thread From: Petrichev Roman @ 2004-04-27 8:57 UTC (permalink / raw) To: community Dmitry Kovalsky wrote: > On Tuesday 27 April 2004 08:46, Alexey Novikov wrote: > > Попробую сегодня по первому способу Попробуйте лучше по второму - фиг что получится :) > > Кстати я вспомнил что строку модлайна 1280х1024@85 я выкопал где то в инете, а > если генерил сам с помошью videogenа то 1) картинка была чуть шире и б) на > левом краю искажалось изображение какбудто закругленный край монитора. Все эти видеогены ни х**а не работают. Я их сто штук перепробовал. > ПОЧЕМУ в Винде с этим нет проблем? Как виндовые средства установки разрешения > нормальные так и разные утилиты нормально работают с мониторами и > развертками! Лично у меня нет никакого желания сидеть с калькуляторами > каждый раз при переходе с одного монитора на другой Винда считывает параметры прямо из монитора (не помню как эта хрень называется), а иксы этого не умеют Поэтому для каждой модели монитора присутствует моделайн в дистрибутиве иксов. Не помню какой там у вас монитор, но на собственном опыте, скажу, что практически все модели импортных известных фирм там есть. Если в альтовых иксах нет, то очевидно они давно не синхронизировались с официальной веткой. Анонсировалась поддержка считывания параметров монитора в новых иксах - 4.4(когда их только собирались выпустить).Появилась или нет - мне не известно. Все это не беда. Пользуйтесь моим советом и все получится. Кстати у меня на работе монитор известной фирмы, определился при установке линукса, но разрешения, к которому я привык в винде - не было в списке допустимых. Решил проблему тем же powerstrip'ом. > И кстати было бы неплохо если бы Мастер делал регулярные апдейты по поддержке > нового железа (например те же самые мониторы для которых уже были бы > модлайны) Этот мониор вышел раньше Мастера 2.2 но в списке его нет :0( Очень странно, видно вам просто не повезло. > > Дима > > >>>Неправильный modeline. Чё-то перекручено. Теперь совет на все времена :) >>>Если на машине есть винда, поставить powerstrip, настроить монитор на >>>нужную(max) частоту и разрешение, в Powerstrip'е взять нужные параметры >>>для моделайна, и вписать их в конфиг иксов. Работает стопроцентно для >>>любых мониторов. На карточках NVidia картинка в линуксе бывает чуть >>>сдвинута вбок. Шлифуется xvidtune'ом и слегка правится конфиг. >>>Да, чуть не забыл, в винде обязательно должны стоять дрова NVidia. >> >>Не надо ля-ля!:) Вот простейший рецепт: >>1. Ищем 3-и X-ы, а точнее /etc/XF86Config от них - там есть много >>разных modeline'ов, или добываем modeline'ы подходящего разрешения другим >>способом. >>2. Берем в руки калькулятор и считаем, например >># 1024x768 @ 120 Hz, 95.8 kHz hsync >>Modeline "1024x768" 138.00 1024 1056 1248 1440 768 771 781 802 >>+hsync -vsync >> >>Здесь 138.00 частота кристалла на видюхе(pixel clock) в MHz, если >>138000000/1440=95833 Hz - горизонтальная развертка >>138000000/1440/802=119 Hz - вертикальная развертка >> >>Все.:) > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 8:57 ` Petrichev Roman @ 2004-04-27 9:17 ` Mike Lykov 2004-04-27 9:18 ` Nizamov Shavkat ` (2 subsequent siblings) 3 siblings, 0 replies; 17+ messages in thread From: Mike Lykov @ 2004-04-27 9:17 UTC (permalink / raw) To: community В сообщении от Вторник 27 Апрель 2004 13:57 Petrichev Roman написал: > Dmitry Kovalsky wrote: > > On Tuesday 27 April 2004 08:46, Alexey Novikov wrote: > > > > Попробую сегодня по первому способу > > Попробуйте лучше по второму - фиг что получится :) > > > Кстати я вспомнил что строку модлайна 1280х1024@85 я выкопал где то в > > инете, а если генерил сам с помошью videogenа то 1) картинка была чуть > > шире и б) на левом краю искажалось изображение какбудто закругленный край > > монитора. > > Все эти видеогены ни х**а не работают. Я их сто штук перепробовал. > > > ПОЧЕМУ в Винде с этим нет проблем? Как виндовые средства установки > > разрешения нормальные так и разные утилиты нормально работают с > > мониторами и развертками! Лично у меня нет никакого желания сидеть с > > калькуляторами каждый раз при переходе с одного монитора на другой > > Винда считывает параметры прямо из монитора (не помню как эта хрень > называется), а иксы этого не умеют Не надо грязи. Если вы этого не умеете это настроить - то не значит, что "иксы этого не умеют" см.: (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) NVIDIA(0): monitor1: Using hsync range of 30.00-95.00 kHz (II) NVIDIA(0): monitor1: Using vrefresh range of 50.00-160.00 Hz (II) NVIDIA(0): Clock range: 12.00 to 215.00 MHz -- Mike ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 8:57 ` Petrichev Roman 2004-04-27 9:17 ` Mike Lykov @ 2004-04-27 9:18 ` Nizamov Shavkat 2004-04-27 10:00 ` Petrichev Roman 2004-04-27 11:19 ` [Comm]дрожание монитора Alexey Morozov 2004-04-27 18:33 ` Sergey Kuznetsov 3 siblings, 1 reply; 17+ messages in thread From: Nizamov Shavkat @ 2004-04-27 9:18 UTC (permalink / raw) To: community > Винда считывает параметры прямо из монитора (не помню как эта хрень > называется), а иксы этого не умеют называется эта штука DDC и иксы умеют это давным-давно достаточно посмотреть в лог иксов ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 9:18 ` Nizamov Shavkat @ 2004-04-27 10:00 ` Petrichev Roman 2004-04-27 11:07 ` Nizamov Shavkat 2004-04-27 11:21 ` Alexey Novikov 0 siblings, 2 replies; 17+ messages in thread From: Petrichev Roman @ 2004-04-27 10:00 UTC (permalink / raw) To: community Nizamov Shavkat wrote: >>Винда считывает параметры прямо из монитора (не помню как эта хрень >>называется), а иксы этого не умеют > > > называется эта штука DDC и иксы умеют это давным-давно > достаточно посмотреть в лог иксов > > > _______________________________________________ > Community mailing list > Community@altlinux.ru > http://lists.altlinux.ru/mailman/listinfo/community > > Беру свои слова обратно. Не знал. Считывать DDC могут. А использовать? ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 10:00 ` Petrichev Roman @ 2004-04-27 11:07 ` Nizamov Shavkat 2004-04-27 11:28 ` монитора Alexey Novikov 2004-04-27 11:21 ` Alexey Novikov 1 sibling, 1 reply; 17+ messages in thread From: Nizamov Shavkat @ 2004-04-27 11:07 UTC (permalink / raw) To: community > > Беру свои слова обратно. Не знал. Считывать DDC могут. А использовать? > А для чего они по-вашему считываются ? там (в логе) видно что иксы считывают информацию о поддерживаемых монитором стандартных режимах. ИМХО, эта информация учитывается иксами, по крайне мере на стандартных развертках (поддерживаемых монитором) искажений изображения не замечено. А вот когда развертки монитором не поддерживаются и возникает глюки с изображением - чаще всего мне встречается "завернутый" нижний правый угол. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re:[Comm]дрожание монитора 2004-04-27 11:07 ` Nizamov Shavkat @ 2004-04-27 11:28 ` Alexey Novikov 0 siblings, 0 replies; 17+ messages in thread From: Alexey Novikov @ 2004-04-27 11:28 UTC (permalink / raw) To: community >изображения не замечено. А вот когда развертки монитором не поддерживаются >и возникает глюки с изображением - чаще всего мне встречается "завернутый" >нижний правый угол. Вот это утверждение не совсем верно.:) Похожие симптомы наблюдаются если время обратного хода луча соответственно modeline меньше реального для данной модели монитора. Это можно иногда побороть увеличением разрыва между первой и последней цифрой для вертикальной и горизонтальной части modeline'а. -- С уважением, Алексей Новиков ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re:[Comm]дрожание монитора 2004-04-27 10:00 ` Petrichev Roman 2004-04-27 11:07 ` Nizamov Shavkat @ 2004-04-27 11:21 ` Alexey Novikov 1 sibling, 0 replies; 17+ messages in thread From: Alexey Novikov @ 2004-04-27 11:21 UTC (permalink / raw) To: community >Беру свои слова обратно. Не знал. Считывать DDC могут. А использовать? Обязательно, если modeline не подходит - он ее отбрасывает. -- С уважением, Алексей Новиков ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 8:57 ` Petrichev Roman 2004-04-27 9:17 ` Mike Lykov 2004-04-27 9:18 ` Nizamov Shavkat @ 2004-04-27 11:19 ` Alexey Morozov 2004-04-27 11:38 ` Mike Lykov 2004-04-27 18:33 ` Sergey Kuznetsov 3 siblings, 1 reply; 17+ messages in thread From: Alexey Morozov @ 2004-04-27 11:19 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 1302 bytes --] On Tue, Apr 27, 2004 at 12:57:34PM +0400, Petrichev Roman wrote: > Винда считывает параметры прямо из монитора (не помню как эта хрень > называется), а иксы этого не умеют X'ы (и не только) это умеют. Одна из утилит называется ddcprobe. Впрочем, нынешние X'ы умеют работать и без XF86Config. > Поэтому для каждой модели монитора присутствует моделайн в дистрибутиве > иксов. Не помню какой там у вас монитор, но на собственном опыте, скажу, > что практически все модели импортных известных фирм там есть. Если в > альтовых иксах нет, то очевидно они давно не синхронизировались с > официальной веткой. Давайте Вы не будете распространять слухи, достоверность которых, мягко говоря, сомнительна. > Анонсировалась поддержка считывания параметров монитора в новых иксах - > 4.4(когда их только собирались выпустить).Появилась или нет - мне не > известно. Все это не беда. Пользуйтесь моим советом и все получится. > Кстати у меня на работе монитор известной фирмы, определился при > установке линукса, но разрешения, к которому я привык в винде - не было > в списке допустимых. Решил проблему тем же powerstrip'ом. Игорь Николаев к лохматом году (ну, то есть, наверное, уже лет десять назад) опубликовал вполне работающий и по нынешнюю пору рецепт подсчета моделайнов. Можно поискать в инете. [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 11:19 ` [Comm]дрожание монитора Alexey Morozov @ 2004-04-27 11:38 ` Mike Lykov 0 siblings, 0 replies; 17+ messages in thread From: Mike Lykov @ 2004-04-27 11:38 UTC (permalink / raw) To: community В сообщении от Вторник 27 Апрель 2004 16:19 Alexey Morozov написал: > Игорь Николаев к лохматом году (ну, то есть, наверное, уже лет десять > назад) опубликовал вполне работающий и по нынешнюю пору рецепт подсчета > моделайнов. Можно поискать в инете. http://knot.pu.ru/faq/xfaq.html уже все найдено и положено в закладки ;) а есть http://zaph.com/Modeline/Calculate.py?sec=730171 еще ;) -- Mike ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 8:57 ` Petrichev Roman ` (2 preceding siblings ...) 2004-04-27 11:19 ` [Comm]дрожание монитора Alexey Morozov @ 2004-04-27 18:33 ` Sergey Kuznetsov 3 siblings, 0 replies; 17+ messages in thread From: Sergey Kuznetsov @ 2004-04-27 18:33 UTC (permalink / raw) To: community On Tue, 27 Apr 2004 12:57:34 +0400 Petrichev Roman <petrichev@orel.mts.ru> wrote: > > Кстати я вспомнил что строку модлайна 1280х1024@85 я выкопал где > > то в инете, а если генерил сам с помошью videogenа то 1) > > картинка была чуть шире и б) на левом краю искажалось > > изображение какбудто закругленный край монитора. > Все эти видеогены ни х**а не работают. Я их сто штук перепробовал. Почему же у меня они работают, интересно? Мой нынешний режим (1152x864, 104 Гц) получен при помощи modeline'а, который сгенерил еще kvideogen из KDE 2.x. Конечно, он был неидеален, но требовал лишь надфиля, а не лома и чье-то матери. Удобнее всего, IMHO, сгенерировать оптимальный (по refresh) режим, а доводить его до ума уже кнопками на мониторе. С уважением, Сергей ^ permalink raw reply [flat|nested] 17+ messages in thread
* [Comm] Re: дрожание монитора 2004-04-27 8:29 ` Dmitry Kovalsky 2004-04-27 8:57 ` Petrichev Roman @ 2004-04-27 9:48 ` Michael Shigorin 1 sibling, 0 replies; 17+ messages in thread From: Michael Shigorin @ 2004-04-27 9:48 UTC (permalink / raw) To: community On Tue, Apr 27, 2004 at 11:29:55AM +0300, Dmitry Kovalsky wrote: > И кстати было бы неплохо если бы Мастер делал регулярные > апдейты по поддержке нового железа (например те же самые Этого в обозримом будущем не предвидится (мне). > мониторы для которых уже были бы модлайны) Этот мониор вышел > раньше Мастера 2.2 но в списке его нет :0( Повесь его данные и полученные modelines багой на пакет installer? -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm]дрожание монитора 2004-04-27 5:46 ` [Comm]дрожание монитора Alexey Novikov 2004-04-27 6:02 ` Petrichev Roman 2004-04-27 8:29 ` Dmitry Kovalsky @ 2004-04-27 8:46 ` Nizamov Shavkat 2 siblings, 0 replies; 17+ messages in thread From: Nizamov Shavkat @ 2004-04-27 8:46 UTC (permalink / raw) To: community >>Неправильный modeline. Чё-то перекручено. Теперь совет на все времена :) >>Если на машине есть винда, поставить powerstrip, настроить монитор на >>нужную(max) частоту и разрешение, в Powerstrip'е взять нужные параметры >>для моделайна, и вписать их в конфиг иксов. Работает стопроцентно для >>любых мониторов. На карточках NVidia картинка в линуксе бывает чуть >>сдвинута вбок. Шлифуется xvidtune'ом и слегка правится конфиг. >>Да, чуть не забыл, в винде обязательно должны стоять дрова NVidia. > Не надо ля-ля!:) Вот простейший рецепт: простейший рецет apt-get install videogen ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2004-04-27 18:33 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-04-26 8:36 [Comm] дрожание монитора Dmitry Kovalsky 2004-04-26 9:43 ` Petrichev Roman 2004-04-27 5:46 ` [Comm]дрожание монитора Alexey Novikov 2004-04-27 6:02 ` Petrichev Roman 2004-04-27 8:29 ` Dmitry Kovalsky 2004-04-27 8:57 ` Petrichev Roman 2004-04-27 9:17 ` Mike Lykov 2004-04-27 9:18 ` Nizamov Shavkat 2004-04-27 10:00 ` Petrichev Roman 2004-04-27 11:07 ` Nizamov Shavkat 2004-04-27 11:28 ` монитора Alexey Novikov 2004-04-27 11:21 ` Alexey Novikov 2004-04-27 11:19 ` [Comm]дрожание монитора Alexey Morozov 2004-04-27 11:38 ` Mike Lykov 2004-04-27 18:33 ` Sergey Kuznetsov 2004-04-27 9:48 ` [Comm] Re: дрожание монитора Michael Shigorin 2004-04-27 8:46 ` [Comm]дрожание монитора Nizamov Shavkat
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git