* [Comm] íÏÄÅÍ Acorp @ 2003-11-30 14:26 å×ÇÅÎÉÊ áÎÁÎØÅ× 2003-12-01 9:15 ` [Comm] нПДЕН Acorp astru 0 siblings, 1 reply; 8+ messages in thread From: å×ÇÅÎÉÊ áÎÁÎØÅ× @ 2003-11-30 14:26 UTC (permalink / raw) To: community Имею систему ALT Linux Junior 2.2, ядро 2.4 up, установил пакет hsflinmodem и hsflinmodem-up. Запустил hsfconfig, возник вопрос, а какой inf выбирать. Acorp Soft M-56 IRW-2 V. 92. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] нПДЕН Acorp 2003-11-30 14:26 [Comm] íÏÄÅÍ Acorp å×ÇÅÎÉÊ áÎÁÎØÅ× @ 2003-12-01 9:15 ` astru 2003-12-01 13:21 ` Genix 0 siblings, 1 reply; 8+ messages in thread From: astru @ 2003-12-01 9:15 UTC (permalink / raw) To: community У меня был похожий модем только PIM-2 - ничего не получилось с подключением - пришлось купить USR PCI 2977 - работает отлично. Встал без проблем. -----Original Message----- From: Евгений Ананьев <eananev@hotbox.ru> To: community@altlinux.ru Date: Sun, 30 Nov 2003 17:26:41 +0300 (MSK) Subject: [Comm] нПДЕН Acorp > > Имею систему ALT Linux Junior 2.2, ядро 2.4 up, установил пакет hsflinmodem и > hsflinmodem-up. Запустил hsfconfig, возник вопрос, а какой inf выбирать. Acorp Soft M-56 > IRW-2 V. 92. > _______________________________________________ > Community mailing list > Community@altlinux.ru > http://www.altlinux.ru/mailman/listinfo/community > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] нПДЕН Acorp 2003-12-01 9:15 ` [Comm] нПДЕН Acorp astru @ 2003-12-01 13:21 ` Genix 2003-12-01 13:56 ` [Comm] Модем Acorp Alexey Morozov 0 siblings, 1 reply; 8+ messages in thread From: Genix @ 2003-12-01 13:21 UTC (permalink / raw) To: community IMHO это совсем разные модемы, один из них HCF другой HSF. HCF получалось заставить работать, HSF не попадался в руки. > У меня был похожий модем только PIM-2 - ничего не получилось с подключением - пришлось купить USR PCI 2977 - работает отлично. Встал без проблем. > > -----Original Message----- > From: Евгений Ананьев <eananev@hotbox.ru> > To: community@altlinux.ru > Date: Sun, 30 Nov 2003 17:26:41 +0300 (MSK) > Subject: [Comm] нПДЕН Acorp > > >>Имею систему ALT Linux Junior 2.2, ядро 2.4 up, установил пакет hsflinmodem и >>hsflinmodem-up. Запустил hsfconfig, возник вопрос, а какой inf выбирать. Acorp Soft M-56 >>IRW-2 V. 92. -- Я летаю снаружи всех измерений... ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] Модем Acorp 2003-12-01 13:21 ` Genix @ 2003-12-01 13:56 ` Alexey Morozov 2003-12-01 14:14 ` Genix 2003-12-01 15:50 ` Re[2]: " Евгений Ананьев 0 siblings, 2 replies; 8+ messages in thread From: Alexey Morozov @ 2003-12-01 13:56 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 1323 bytes --] On Mon, Dec 01, 2003 at 04:21:29PM +0300, Genix wrote: > IMHO это совсем разные модемы, один из них HCF другой HSF. HCF > получалось заставить работать, HSF не попадался в руки. HSF-модем завелся сразу, за исключением того, что ни в какую не вязался со старым модемом моего друга. Друг утверждает, что модем (вероятно, какой-либо из зикселей, н-р, 1496 серии) держит только старые протоколы (до скорости в 14400), а поддержки этих протоколов ни в последнем свободном драйвере от линуксантов, ни в том, который они сейчас раздают как фришный, видимо, толком нет. Ну, а, в общем, мое мнение по поводу конексантов/линуксантов очень простое: на#$%. Если люди не могут договориться с вендором о выпуске бесплатных драйверов (в которых, по идее, должен быть заинтересован вендор), то связываться с ними не стоит. К тому же, отдавать $15 за недописанный драйвер к десятидолларовому модему смысла нет просто экономически. Особенно напрягаться эти люди не собираются (я спрашивал у линуксантов про HCF USB модем, ответ был: нет, модемы на Cadmus1 мы поддерживать не будем, в них много поллинга итп. На винде-то работает, как миленький, и CPU не грузится). Гораздо проще взять или полностью железный модем, или взять что-нибудь на люсенте, в драйверах для которого тоже есть некоторые проблемы, но зато есть и желание их решать. [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] Модем Acorp 2003-12-01 13:56 ` [Comm] Модем Acorp Alexey Morozov @ 2003-12-01 14:14 ` Genix 2003-12-01 15:50 ` Re[2]: " Евгений Ананьев 1 sibling, 0 replies; 8+ messages in thread From: Genix @ 2003-12-01 14:14 UTC (permalink / raw) To: community Alexey Morozov пишет: > Гораздо проще взять или полностью железный модем, или взять что-нибудь > на люсенте, в драйверах для которого тоже есть некоторые проблемы, но > зато есть и желание их решать. Полностью согласен с последней фразой (да и со всем письмом по большому счету тоже). У самого долгое время стояла Lucent'овская свистулька которая сейчас стоит около 400 рублей. Но это только в случае "из двух зол выбирают меньшее" -- все равно аппаратный модем никто не отменял. -- Я летаю снаружи всех измерений... ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re[2]: [Comm] Модем Acorp 2003-12-01 13:56 ` [Comm] Модем Acorp Alexey Morozov 2003-12-01 14:14 ` Genix @ 2003-12-01 15:50 ` Евгений Ананьев 2003-12-01 16:17 ` Alexey Morozov 1 sibling, 1 reply; 8+ messages in thread From: Евгений Ананьев @ 2003-12-01 15:50 UTC (permalink / raw) To: Alexey Morozov Здравствуйте, Alexey. Вы писали 1 декабря 2003 г., 18:56:33: AM> HSF-модем завелся сразу У меня с ним проблемы, поставил два пакета шсфлинмодем и шсфлинмодем-ап. Версия ядра 2.4.20-up. hsfconfig запускал, выбирал инф ╧3, hsf.ini. При запуске КППП и при попытке опросить модем он пишет, модем занят. Пользователь добавлен в группу uucp, wheel. APIC функция активирована в BIOS, хотя установка проходила с параметром APIC=off. -- С уважением, Евгений mailto:eananev@hotbox.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Comm] Модем Acorp 2003-12-01 15:50 ` Re[2]: " Евгений Ананьев @ 2003-12-01 16:17 ` Alexey Morozov 2003-12-01 17:31 ` Re[2]: " Евгений Ананьев 0 siblings, 1 reply; 8+ messages in thread From: Alexey Morozov @ 2003-12-01 16:17 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 603 bytes --] On Mon, Dec 01, 2003 at 08:50:01PM +0500, Евгений Ананьев wrote: > AM> HSF-модем завелся сразу > > У меня с ним проблемы, поставил два пакета шсфлинмодем и > шсфлинмодем-ап. Версия ядра 2.4.20-up. hsfconfig запускал, выбирал > инф ╧3, hsf.ini. При запуске КППП и при попытке опросить модем он > пишет, модем занят. Пользователь добавлен в группу uucp, wheel. > APIC функция активирована в BIOS, хотя установка проходила с > параметром APIC=off. Вы уверены, что у Вас именно HSF, а не HCF? Приду домой, посмотрю, может, у меня остались живые конфиги от него. Если остались - отправлю. [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re[2]: [Comm] Модем Acorp 2003-12-01 16:17 ` Alexey Morozov @ 2003-12-01 17:31 ` Евгений Ананьев 0 siblings, 0 replies; 8+ messages in thread From: Евгений Ананьев @ 2003-12-01 17:31 UTC (permalink / raw) To: Alexey Morozov Здравствуйте, Alexey. Вы писали 1 декабря 2003 г., 21:17:12: AM> Вы уверены, что у Вас именно HSF, а не HCF? AM> Приду домой, посмотрю, может, у меня остались живые конфиги от него. AM> Если остались - отправлю. Да модем был HCF. Настроил, работает. Надобы все данные по настройке модемов собрать в одну статейку. -- С уважением, Евгений mailto:eananev@hotbox.ru ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2003-12-01 17:31 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2003-11-30 14:26 [Comm] íÏÄÅÍ Acorp å×ÇÅÎÉÊ áÎÁÎØÅ× 2003-12-01 9:15 ` [Comm] нПДЕН Acorp astru 2003-12-01 13:21 ` Genix 2003-12-01 13:56 ` [Comm] Модем Acorp Alexey Morozov 2003-12-01 14:14 ` Genix 2003-12-01 15:50 ` Re[2]: " Евгений Ананьев 2003-12-01 16:17 ` Alexey Morozov 2003-12-01 17:31 ` Re[2]: " Евгений Ананьев
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git