* [Comm] smp-ядро @ 2004-01-09 11:41 ` viz 2004-01-05 16:11 ` [Comm] pppd Linux dial to Win98SE finder 2004-01-09 12:35 ` [Comm]smp-ядро SH 0 siblings, 2 replies; 5+ messages in thread From: viz @ 2004-01-09 11:41 UTC (permalink / raw) To: community Hello community, viz wrote: >> Купил себе Alt Master 2.2 попытался поставить...И вот чего не >> работает: В окне приглашения к установке ,когда нажимаю enter, >> экран становится черный(все виснет) и на клавиатуре мигают индикаторы Caps Lock >> и Scroll Lock.В итоге удалось увидеть >> drakx с опцией vga16(кажется...не помню) ну поставил систему.Когда >> пытаюсь запускать линукс, выбирая в лило опцию alt linux,все опять >> виснет и (на клаве лампочки мигают) загрузить получается если >> выбрать safe mode. В общем как я понимаю дело в видюхе(я так думаю >> что в safe mode грузит потому что бутсплеш не используется в этом >> режиме)Ну вот...может кто поможет мне? >> ps: видео: Ati Radeon 9000 128mb (saphire) >> мать: Asus P4G800 Deluxe >> проц: P4 3.00Ghz crar> А памяти на машине сколько? >> pss: может че в bios-е ? PNP OS я вырубил crar> Используйте параметр vga=normal при загрузке, и уберите vga=... из crar> настроек загрузчика (LILO/GRUB). У vesafb в той версии ядра есть crar> проблемы при работе с картами с большим объёмом видеопамяти (больше crar> 64М), если при этом на машине ещё и RAM > 800M. Это связано с тем, crar> что для ядра выделяется только 1 Гб адресного пространства, и 128М crar> видеопамяти туда просто не влезают. А в связи с особенностями vesafb crar> (видеорежим устанавливается ещё до запуска собственно ядра) в этом crar> случае даже не удаётся вывести на экран сообщение об ошибке. crar> Кстати, при наличии 1 Гб оперативной памяти (или больше) для crar> использования всего объёма в M2.2 потребуется установить SMP-ядро crar> (хотя для P4 это всё равно понадобится для использования HT) - ядро crar> для однопроцессорных машин в M2.2 собрано без поддержки HIGHMEM. crar> -------------- next part -------------- crar> A non-text attachment was scrubbed... crar> Name: not available crar> Type: application/pgp-signature crar> Size: 189 bytes crar> Desc: not available crar> Url : crar> /pipermail/community/attachments/20040108/0a954955/attachment-0001.bin ---------------------------------------------- Спасибо! параметр vga=normal мне помог.Памяти у меня 1Гб...возник новый вопрос: Что такое smp-ядро и где его взять?Или smp это опция в ядре? В руководствах к дистрибутиву не нашел ничего про ядро и способах его установки(все содержание проглядел-вроде не слепой)И еще после установки у меня не работает аппаратное 3д ускорение(хотя во время установки линукс я ее выбрал) как мне его включить? Я набирал glxgears и мне выдало что вообще такой команды bash не знает...про fglrxconfig он тоже не знает(bash)... ps: я наверно неудачник раз у меня столько проблем с основаным на самом юзер френдли дистром =)У знакомого все встало по дефолту(правда тачка у него старей),а мне как обычно грабли и гуру рядом нет =( -- Best regards, viz mailto:viz@bk.ru ^ permalink raw reply [flat|nested] 5+ messages in thread
* [Comm] pppd Linux dial to Win98SE 2004-01-09 11:41 ` [Comm] smp-ядро viz @ 2004-01-05 16:11 ` finder 2004-01-11 16:14 ` Pavel Tsybulin 2004-01-09 12:35 ` [Comm]smp-ядро SH 1 sibling, 1 reply; 5+ messages in thread From: finder @ 2004-01-05 16:11 UTC (permalink / raw) To: community Здравствуйте, Ну неужели никто не dial-up-ился к Win98SE !!!!!! А то хочется все-таки показать людям Apache в Linux !!!!!!!!!!!!!! У меня Master 2.2 Читал man chat, man pppd , ppp-HOWTO Cам написал скрипт дозвона в Internet Все нормально работает , но захотелось мне подцепить через модем Windows к моей тачке все идет путем поначалу но потом: (записи в /var/log/messeges при опциях noauth ) Jan 5 01:26:43 localhost chat[1790]: send (ATDT8225239^M) Jan 5 01:26:43 localhost chat[1790]: expect (CONNECT) Jan 5 01:26:43 localhost chat[1790]: ^M Jan 5 01:27:08 localhost gpm[1276]: Connecting at fd 6 Jan 5 01:27:14 localhost chat[1790]: ATDT8225239^M^M Jan 5 01:27:14 localhost chat[1790]: CONNECT Jan 5 01:27:14 localhost chat[1790]: -- got it Jan 5 01:27:14 localhost chat[1790]: send (^M) Jan 5 01:27:14 localhost pppd[1788]: Serial connection established. Jan 5 01:27:14 localhost pppd[1788]: Using interface ppp0 Jan 5 01:27:14 localhost pppd[1788]: Connect: ppp0 <--> /dev/ttyS1 Jan 5 01:27:14 localhost /etc/hotplug/net.agent: assuming ppp0 is already up Jan 5 01:27:14 localhost pppd[1788]: LCP terminated by peer Jan 5 01:27:17 localhost pppd[1788]: Connection terminated. это если не поставлены галочка - Требуется зашифрованный пароль а если поставлена, то (При опциях auth +chap +chapms +chapms-v2 name dima) Jan 5 01:50:08 localhost chat[2018]: send (ATDT8225239^M) Jan 5 01:50:08 localhost chat[2018]: expect (CONNECT) Jan 5 01:50:08 localhost chat[2018]: ^M Jan 5 01:50:38 localhost chat[2018]: ATDT8225239^M^M Jan 5 01:50:38 localhost chat[2018]: CONNECT Jan 5 01:50:38 localhost chat[2018]: -- got it Jan 5 01:50:38 localhost chat[2018]: send (^M) Jan 5 01:50:38 localhost pppd[2016]: Serial connection established. Jan 5 01:50:38 localhost pppd[2016]: Using interface ppp0 Jan 5 01:50:38 localhost pppd[2016]: Connect: ppp0 <--> /dev/ttyS1 Jan 5 01:50:38 localhost /etc/hotplug/net.agent: assuming ppp0 is already up Jan 5 01:50:39 localhost pppd[2016]: peer refused to authenticate: terminating link Jan 5 01:50:39 localhost pppd[2016]: Connection terminated. Пароли занесены и в pap-secrets И chap-secrets ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] pppd Linux dial to Win98SE 2004-01-05 16:11 ` [Comm] pppd Linux dial to Win98SE finder @ 2004-01-11 16:14 ` Pavel Tsybulin 0 siblings, 0 replies; 5+ messages in thread From: Pavel Tsybulin @ 2004-01-11 16:14 UTC (permalink / raw) To: community On Mon, Jan 05, 2004 at 08:11:24PM +0400, finder wrote: > Здравствуйте, > Ну неужели никто не dial-up-ился к Win98SE !!!!!! > А то хочется все-таки показать людям Apache в Linux !!!!!!!!!!!!!! > > Windows к моей тачке все идет путем поначалу но потом: > (записи в /var/log/messeges при опциях noauth ) > это если не поставлены галочка - Требуется зашифрованный пароль > > а если поставлена, то > (При опциях auth +chap +chapms +chapms-v2 name dima) > насколько я помню, опция ppp auth влияет не на шифрование паролей, а на требование к "той стороне" назвать себя. windows не имеет привычки называть свое имя, т.е. в ppp нужно noauth поставить. а шифрование уже согласовывать галочкой "шифрование" и опциями chap* Pasha ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm]smp-ядро 2004-01-09 11:41 ` [Comm] smp-ядро viz 2004-01-05 16:11 ` [Comm] pppd Linux dial to Win98SE finder @ 2004-01-09 12:35 ` SH 2004-01-09 12:57 ` [Comm]smp-ядро Genix 1 sibling, 1 reply; 5+ messages in thread From: SH @ 2004-01-09 12:35 UTC (permalink / raw) To: community Да нет, с новыми машинками бывают проблемы, че тут такова все норм =) smp ядро это ядро собранное для многопроцессорных машин, новые ядра лучше взять с репозитария =) >Hello community, > >viz wrote: >>> Купил себе Alt Master 2.2 попытался поставить...И вот чего не >>> работает: В окне приглашения к установке ,когда нажимаю enter, >>> экран становится черный(все виснет) и на клавиатуре мигают индикаторы Caps Lock >>> и Scroll Lock.В итоге удалось увидеть >>> drakx с опцией vga16(кажется...не помню) ну поставил систему.Когда >>> пытаюсь запускать линукс, выбирая в лило опцию alt linux,все опять >>> виснет и (на клаве лампочки мигают) загрузить получается если >>> выбрать safe mode. В общем как я понимаю дело в видюхе(я так думаю >>> что в safe mode грузит потому что бутсплеш не используется в этом >>> режиме)Ну вот...может кто поможет мне? >>> ps: видео: Ati Radeon 9000 128mb (saphire) >>> мать: Asus P4G800 Deluxe >>> проц: P4 3.00Ghz > >crar> А памяти на машине сколько? > >>> pss: может че в bios-е ? PNP OS я вырубил > >crar> Используйте параметр vga=normal при загрузке, и уберите vga=... из >crar> настроек загрузчика (LILO/GRUB). У vesafb в той версии ядра есть >crar> проблемы при работе с картами с большим объёмом видеопамяти (больше >crar> 64М), если при этом на машине ещё и RAM > 800M. Это связано с тем, >crar> что для ядра выделяется только 1 Гб адресного пространства, и 128М >crar> видеопамяти туда просто не влезают. А в связи с особенностями vesafb >crar> (видеорежим устанавливается ещё до запуска собственно ядра) в этом >crar> случае даже не удаётся вывести на экран сообщение об ошибке. > >crar> Кстати, при наличии 1 Гб оперативной памяти (или больше) для >crar> использования всего объёма в M2.2 потребуется установить SMP-ядро >crar> (хотя для P4 это всё равно понадобится для использования HT) - ядро >crar> для однопроцессорных машин в M2.2 собрано без поддержки HIGHMEM. >crar> -------------- next part -------------- >crar> A non-text attachment was scrubbed... >crar> Name: not available >crar> Type: application/pgp-signature >crar> Size: 189 bytes >crar> Desc: not available >crar> Url : >crar> /pipermail/community/attachments/20040108/0a954955/attachment-0001.bin >---------------------------------------------- >Спасибо! параметр vga=normal мне помог.Памяти у меня 1Гб...возник новый >вопрос: Что такое smp-ядро и где его взять?Или smp это опция в ядре? В >руководствах к дистрибутиву не нашел ничего про ядро и способах его >установки(все содержание проглядел-вроде не слепой)И еще после >установки у меня не работает аппаратное 3д ускорение(хотя во время >установки линукс я ее выбрал) как мне его включить? Я набирал glxgears >и мне выдало что вообще такой команды bash не знает...про fglrxconfig он >тоже не знает(bash)... >ps: я наверно неудачник раз у меня столько проблем с основаным на >самом юзер френдли дистром =)У знакомого все встало по дефолту(правда >тачка у него старей),а мне как обычно грабли и гуру >рядом нет =( >-- >Best regards, > viz mailto:viz@bk.ru > > >_______________________________________________ >Community mailing list >Community@altlinux.ru >http://www.altlinux.ru/mailman/listinfo/community -- --- ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm]smp-ядро 2004-01-09 12:35 ` [Comm]smp-ядро SH @ 2004-01-09 12:57 ` Genix 0 siblings, 0 replies; 5+ messages in thread From: Genix @ 2004-01-09 12:57 UTC (permalink / raw) To: community SH пишет: > Да нет, с новыми машинками бывают проблемы, че тут такова все норм =) > smp ядро это ядро собранное для многопроцессорных машин, новые ядра лучше взять с репозитария =) ...но не обязательно. На дисках мастера лежат два ядра, -up (для однопроцессорных) и -smp (для многопроцессорных) систем. Про второе и шла речь. Если скормить диски apt-get'у, то времени на поиск и установку уйдет минимум. -- У каждого в башке свои тараканы... ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2004-01-11 16:14 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-01-09 11:41 ` [Comm] smp-ядро viz 2004-01-05 16:11 ` [Comm] pppd Linux dial to Win98SE finder 2004-01-11 16:14 ` Pavel Tsybulin 2004-01-09 12:35 ` [Comm]smp-ядро SH 2004-01-09 12:57 ` [Comm]smp-ядро Genix
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git