From: "Прокопьев Евгений" <john@rmts.donpac.ru>
To: community@altlinux.ru
Subject: [Comm] vlan24 без IP на сетевых интерфейсах
Date: Wed, 17 Sep 2003 16:18:03 +0400
Message-ID: <3F6850FB.1090306@rmts.donpac.ru> (raw)
Здравствуйте!
На ALM 2.2 c updates наблюдается следующая картина:
# ifconfig
eth1 Link encap:Ethernet HWaddr 00:60:97:AE:F4:CA
inet addr:192.168.101.15 Bcast:192.168.101.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:251 errors:0 dropped:0 overruns:0 frame:0
TX packets:154 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:82263 (80.3 Kb) TX bytes:26305 (25.6 Kb)
Interrupt:5 Base address:0xb800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROTO=static
IPADDR=192.168.101.15
NETMASK=255.255.255.0
NETWORK=192.168.101.0
BROADCAST=192.168.101.255
ONBOOT=yes
# vconfig24 rem eth1.0
Removed VLAN -:eth1.0:-
# vconfig24 add eth0 0
ERROR: trying to add VLAN #0 to IF -:eth0:- error: Invalid argument
# vconfig24 add eth1 0
Added VLAN with VID == 0 to IF -:eth1:-
Т.е. виланы можно добавлять только к сконфигурированным сетевым
интерфейсам. Можно ли использовать линуксовые виланы без указания
настроек IP и IPX для сетевых интерфейсов? Может я чего не понимаю,
тогда прошу объяснить.
Если настройка сетевых интерфейсов обязательна, то как с этим обстоит
дело в FreeBSD?
--
С уважением, Прокопьев Евгений
next reply other threads:[~2003-09-17 12:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-09-17 12:18 Прокопьев Евгений [this message]
2003-09-17 13:52 ` Dmitry Lebkov
2003-09-17 14:37 ` Oleg K.Artemjev
2003-09-17 21:33 ` Dmitry Lebkov
2003-09-18 9:45 ` Oleg K.Artemjev
2003-09-18 10:07 ` Oleg K.Artemjev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F6850FB.1090306@rmts.donpac.ru \
--to=john@rmts.donpac.ru \
--cc=community@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git