From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <3EE5627C.4070804@rmts.donpac.ru> Date: Tue, 10 Jun 2003 08:45:48 +0400 From: =?KOI8-R?Q?=F0=D2=CF=CB=CF=D0=D8=C5=D7_=E5=D7=C7=C5=CE=C9=CA?= User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; ru-RU; rv:1.2.1) Gecko/20021123 X-Accept-Language: ru-ru, en MIME-Version: 1.0 To: Community@altlinux.ru Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: 8bit X-MDRemoteIP: 195.161.172.85 X-Return-Path: john@rmts.donpac.ru X-MDaemon-Deliver-To: Community@altlinux.ru Subject: [Comm] =?KOI8-R?Q?=FE=D4=CF_=D3_=CD=CF=C9=CD_/dev/hdc=3F?= Sender: community-admin@altlinux.ru Errors-To: community-admin@altlinux.ru X-BeenThere: community@altlinux.ru X-Mailman-Version: 2.0.9 Precedence: bulk Reply-To: community@altlinux.ru X-Reply-To: john@rmts.donpac.ru List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Archived-At: List-Archive: List-Post: Здравствуйте! Кто-нибудь может объяснить такой феномен: #cfdisk /dev/hdc FATAL ERROR: Bad primary partition 0: Partition ends after end-of-disk Press any key to exit cfdisk # fdisk /dev/hdc The number of cylinders for this disk is set to 7476. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdc: 61.4 GB, 61492838400 bytes 255 heads, 63 sectors/track, 7476 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 7477 60051568+ 83 Linux Command (m for help): Собственно, так было после установки системы, раздел /dev/hdc1 был создан в fdisk, а на нем была создана XFS. На разделе лежит немаленькая БД и вроде нормально себя чувствует, хотя пока еще работает в отладочном режиме. Кстати, абсолютно аналогично размечен /dev/hdc, но его видит и fdisk и cfdisk. И еще gkrellm отказывается рисовать графики по /dev/hdc, что тоже настораживает. Какие проблемы я могу получить в будущем? -- С уважением, Прокопьев Евгений