ALT Linux Community general discussions
 help / color / mirror / Atom feed
* Re: [Comm] Пересборка ядра.
  2003-06-05  9:56 [Comm] Пересборка ядра Valery V. Inozemtsev
@ 2003-06-05  6:38 ` Evgeny Yugov
  2003-06-05 11:07   ` Valery V. Inozemtsev
  2003-06-05 11:48   ` Valery V. Inozemtsev
  2003-06-06 14:27 ` [Comm] " Alexey Tourbin
  1 sibling, 2 replies; 7+ messages in thread
From: Evgeny Yugov @ 2003-06-05  6:38 UTC (permalink / raw)
  To: community

On Thu, 05 Jun 2003 09:56:37 +0000
"Valery V. Inozemtsev" <shrek@progroup.ru> wrote:

VVI> День добрый.
VVI> 
VVI> Ядро 2.4.20-alt5 из коробки. Пытаюсь пересобрать, при make bzImage
VVI> орет следующее

VVI> Причем если делать rpmbuild --rebuild kernel24-2.4.20-alt5.src.rpm
VVI> все проходит на ура, пакеты собираются.
VVI> Куда девался этот stdarg.h?
VVI> Как его собрать то нормально?
Очень неплохо описанно на www.atmsk.ru...

-- 
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Пересборка ядра.
  2003-06-05 11:07   ` Valery V. Inozemtsev
@ 2003-06-05  7:59     ` Evgeny Yugov
  0 siblings, 0 replies; 7+ messages in thread
From: Evgeny Yugov @ 2003-06-05  7:59 UTC (permalink / raw)
  To: community

On Thu, 05 Jun 2003 11:07:09 +0000

"Valery V. Inozemtsev" <shrek@progroup.ru> wrote:
VVI> >Очень неплохо описанно на www.atmsk.ru...
VVI> Странно все это...
Что именно? ;o)

-- 
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Пересборка ядра.
  2003-06-05 11:48   ` Valery V. Inozemtsev
@ 2003-06-05  8:19     ` Evgeny Yugov
  0 siblings, 0 replies; 7+ messages in thread
From: Evgeny Yugov @ 2003-06-05  8:19 UTC (permalink / raw)
  To: community

On Thu, 05 Jun 2003 11:48:35 +0000
"Valery V. Inozemtsev" <shrek@progroup.ru> wrote:

VVI> >Очень неплохо описанно на www.atmsk.ru...
VVI> Шайтан...
VVI> Ниче не понял... Почему так? почему не сделать обычный
VVI> kernel-source?
А чем rpm не устраивает? 8-0

-- 
With Best regards,
Evgeny Yugov,
MTS, programmer of Advanced Technologies Departament.
Registered Linux User #316667
mailto:yugov@scs-900.ru


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [Comm] Пересборка ядра.
@ 2003-06-05  9:56 Valery V. Inozemtsev
  2003-06-05  6:38 ` Evgeny Yugov
  2003-06-06 14:27 ` [Comm] " Alexey Tourbin
  0 siblings, 2 replies; 7+ messages in thread
From: Valery V. Inozemtsev @ 2003-06-05  9:56 UTC (permalink / raw)
  To: community

День добрый.

Ядро 2.4.20-alt5 из коробки. Пытаюсь пересобрать, при make bzImage орет 
следующее
____________________________________________________________________________________________________________________
make[1]: Вход в каталог `/home/valery/RPM/BUILD/linux-2.4.20/kernel'
make all_targets
make[2]: Вход в каталог `/home/valery/RPM/BUILD/linux-2.4.20/kernel'
gcc -D__KERNEL__ -I/home/valery/RPM/BUILD/linux-2.4.20/include -pipe 
-Wall -O2 -fexpensive-optimizations -march=athlon -fomit-frame-pointer 
-falign-loops=2 -falign-jumps=2 -falign-functions=2 
-mpreferred-stack-boundary=2 -Wstrict-prototypes -fno-strict-aliasing  
-nostdinc -iwithprefix include -DKBUILD_BASENAME=sched  
-fno-omit-frame-pointer -c -o sched.o sched.c
In file included from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/wait.h:13,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/fs.h:12,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/capability.h:282,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/binfmts.h:5,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/sched.h:9,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/mm.h:4,
                 from sched.c:23:
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/kernel.h:10:20: 
stdarg.h: No such file or directory
In file included from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/wait.h:13,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/fs.h:12,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/capability.h:282,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/binfmts.h:5,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/sched.h:9,
                 from 
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/mm.h:4,
                 from sched.c:23:
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/kernel.h:74: parse 
error before "va_list"
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/kernel.h:74: warning: 
function declaration isn't a prototype
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/kernel.h:77: parse 
error before "va_list"
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/kernel.h:77: warning: 
function declaration isn't a prototype
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/kernel.h:81: parse 
error before "va_list"
/home/valery/RPM/BUILD/linux-2.4.20/include/linux/kernel.h:81: warning: 
function declaration isn't a prototype
make[2]: *** [sched.o] Ошибка 1
make[2]: Выход из каталог `/home/valery/RPM/BUILD/linux-2.4.20/kernel'
make[1]: *** [first_rule] Ошибка 2
make[1]: Выход из каталог `/home/valery/RPM/BUILD/linux-2.4.20/kernel'
make: *** [_dir_kernel] Ошибка 2
____________________________________________________________________________________________________________________

Причем если делать rpmbuild --rebuild kernel24-2.4.20-alt5.src.rpm все 
проходит на ура, пакеты собираются.
Куда девался этот stdarg.h?
Как его собрать то нормально?

С уважением,
Валерий.



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Пересборка ядра.
  2003-06-05  6:38 ` Evgeny Yugov
@ 2003-06-05 11:07   ` Valery V. Inozemtsev
  2003-06-05  7:59     ` Evgeny Yugov
  2003-06-05 11:48   ` Valery V. Inozemtsev
  1 sibling, 1 reply; 7+ messages in thread
From: Valery V. Inozemtsev @ 2003-06-05 11:07 UTC (permalink / raw)
  To: community

>
>
>Очень неплохо описанно на www.atmsk.ru...
>
>  
>
Странно все это...



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Пересборка ядра.
  2003-06-05  6:38 ` Evgeny Yugov
  2003-06-05 11:07   ` Valery V. Inozemtsev
@ 2003-06-05 11:48   ` Valery V. Inozemtsev
  2003-06-05  8:19     ` Evgeny Yugov
  1 sibling, 1 reply; 7+ messages in thread
From: Valery V. Inozemtsev @ 2003-06-05 11:48 UTC (permalink / raw)
  To: community

>
>
>Очень неплохо описанно на www.atmsk.ru...
>
>  
>
Шайтан...
Ниче не понял... Почему так? почему не сделать обычный kernel-source?



^ permalink raw reply	[flat|nested] 7+ messages in thread

* [Comm] Re: Пересборка ядра.
  2003-06-05  9:56 [Comm] Пересборка ядра Valery V. Inozemtsev
  2003-06-05  6:38 ` Evgeny Yugov
@ 2003-06-06 14:27 ` Alexey Tourbin
  1 sibling, 0 replies; 7+ messages in thread
From: Alexey Tourbin @ 2003-06-06 14:27 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 280 bytes --]

On Thu, Jun 05, 2003 at 09:56:37AM +0000, Valery V. Inozemtsev wrote:
> Ядро 2.4.20-alt5 из коробки. Пытаюсь пересобрать, при make bzImage орет 
> следующее

> stdarg.h: No such file or directory

Ну так у вас stdarg.h есть?

$ locate stdarg.h
$ rpm -qa 'gcc*' | xargs rpm -Vv

?

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2003-06-06 14:27 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-06-05  9:56 [Comm] Пересборка ядра Valery V. Inozemtsev
2003-06-05  6:38 ` Evgeny Yugov
2003-06-05 11:07   ` Valery V. Inozemtsev
2003-06-05  7:59     ` Evgeny Yugov
2003-06-05 11:48   ` Valery V. Inozemtsev
2003-06-05  8:19     ` Evgeny Yugov
2003-06-06 14:27 ` [Comm] " Alexey Tourbin

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git