* [Comm] aic7xxx loop
@ 2003-04-21 10:17 Eugene Azarkin
2003-04-21 11:22 ` Igor Homyakov
0 siblings, 1 reply; 2+ messages in thread
From: Eugene Azarkin @ 2003-04-21 10:17 UTC (permalink / raw)
To: community
Доброе время !
Пробую установить Мастер 2.2 на сервер с интеловой мамой на 440 чипсете
(двухпроцессорная. проц стоит один)
При установке он чует Adaptec 7896. пытается загрузить модуль aic 7xxx и
дальше не идет. В
4ой консоле повторяющиеся сообщения
<cut>
aic7xxx_abort returts 0x2002
device set ofline .........
attemting to queue an ABORT message....
.........
........
<cut>
Пробовал (linux=APIC) - не помогает
Может кто знает как ставить Мастер на эту мат. плату ?
Eugene Azarkin
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Comm] aic7xxx loop
2003-04-21 10:17 [Comm] aic7xxx loop Eugene Azarkin
@ 2003-04-21 11:22 ` Igor Homyakov
0 siblings, 0 replies; 2+ messages in thread
From: Igor Homyakov @ 2003-04-21 11:22 UTC (permalink / raw)
To: ALT Linux Community; +Cc: Eugene Azarkin, rider
* Eugene Azarkin <admin @ ligalomb.ru> [030421 14:19]:
> Доброе время !
> Пробую установить Мастер 2.2 на сервер с интеловой мамой на 440 чипсете
> (двухпроцессорная. проц стоит один)
> При установке он чует Adaptec 7896. пытается загрузить модуль aic 7xxx и
> дальше не идет. В
> 4ой консоле повторяющиеся сообщения
> <cut>
> aic7xxx_abort returts 0x2002
> device set ofline .........
> attemting to queue an ABORT message....
Ох как я намучалься с этим железом Ж(((((, у меня таких серверов
как минимум 2 и еще у клиентов с десяток ;-///
по моим наблюдениям, проблемы возникают только на 7896
на ALT Linux Master 2.0/2.2 не могу сказать в чем точно проблема
варианты такие
- отключен apic
- aic7xxx не работает с этим конроллером (он кстати старый в ядре)
Я буквально позавчера решил эти грабли следующим образом:
- установил IDE винт в сервер
- запустил установку в режиме эксперт (для этого F1 в начале установки и
написать expert в приглашении boot:) это делаеться для того чтобы
предотвратить автоматическию загрузку драйвера
- когда вам предложат загрузить драйвер для SCSI выбирайте из списка
чтонибуть безобидное типа isofs.o
- запускаеться инсталятор который, не видит SCSI дисков (драйверов то нет )
устанавливайте систему на IDE диске и НЕ ЗАБУДТЕ сделать загрузочную дискету !!!
- перегружаем систему у меня с IDE грузиться не захотел, по этому я
грузилься с дискеты параметры загрузки
linux apic root=/dev/hdaX X- подставить свой
- система грузиться но SCSI дисков не видит, возможно при
инициализации немного подвиснет опятьже при попытке загрузить aic7xxx
(лечиться Ctrl-C)
- теперь самое интереное
# rmmod aic7xxx
# modprobe aic7xxx_old
после этого я смог получить доступ к SCSI дискам,
- теперь надо разметить диски и скопировать на них систему с IDE диска
- chroot-роваться на точку монтирования будущего катлога /
- в modules.conf заменит aic7xxx на aic7xxx_old,
- отредактировать /etc/fstab
- добавить aoic в параметры ядра
- перегенерить initrd имидж и установить загрузчик
После перезагрузки сервер у меня запустилься нормально.
--
Igor Homyakov
<homyakov AT ramax.spb.ru>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-04-21 11:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-04-21 10:17 [Comm] aic7xxx loop Eugene Azarkin
2003-04-21 11:22 ` Igor Homyakov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git