From: Дмитрий <cornerman@narod.ru> To: community <community@altlinux.ru> Subject: [Comm] Scaner Acer640BT(USB)-Rezultat experimentov. Date: Thu, 27 Mar 2003 22:24:18 +0000 Message-ID: <3E837A12.4050701@narod.ru> (raw) Доброе время суток! OS ALT Linux Master 2.2 Результаты подключения сканера Acer 640BT(USB): _>> В файле 'dll.conf' оставил запись - snapscan и все. Отредактировал >> файл "snapscan.conf" до вида: >> /etc/sane.d/acerfirm /etc/sane.d/U64V119.BIN # здесь просто загрузка, >> которую можно запустить >> >> #вручную для проверки работоспособности >> /dev/usb/scanner0 >> usb 0x4a5 0x2040 В данном случае будет следующее: /etc/sane.d/acerfirm /etc/sane.d/U64V119.BIN /dev/usb/scanner0 usb 0x4a5 0x20be Далее можно попробовать выполнить: export SANE_DEBUG_SNAPSCAN=2 scanimage -L_ Далее приводятся файлы, которые переделывались(вместо U64V119.BIN был U64V120.BIN). dll.conf # enable the next line if you want to allow access through the network: net abaton agfafocus apple avision artec as6e bh canon canon630u #canon_pp coolscan coolscan2 #dc25 #dc210 #dc240 dmc epson fujitsu hp hpsj5s leo matsushita microtek microtek2 mustek #mustek_pp mustek_usb nec pie pint plustek #pnm qcam ricoh s9036 sceptre sharp sm3600 snapscan sp15c #st400 tamarack teco1 teco2 teco3 #test umax #umax_pp umax1220u v4l # # The following backends are not included in the sane-backends distribution # If you want to use them, download them from their webpages and read their # documentation # # HP OfficeJet backend homepage: http://hpoj.sf.net/ # Uncomment the following line if hpoj is installed: #hpoj # # gt68xx backend homepage: http://www.meier-geinitz.de/sane/gt68xx-backend/ # Uncomment the following line if gt68xx is installed: #gt68xx # enable the next line if you want to allow access through the network: net abaton agfafocus apple avision artec as6e bh canon canon630u #canon_pp coolscan coolscan2 #dc25 #dc210 #dc240 dmc epson fujitsu hp hpsj5s leo matsushita microtek microtek2 mustek #mustek_pp mustek_usb nec pie pint plustek #pnm qcam ricoh s9036 sceptre sharp sm3600 snapscan sp15c #st400 tamarack teco1 teco2 teco3 #test umax #umax_pp umax1220u v4l _ snapscan_ # # The following backends are not included in the sane-backends distribution # If you want to use them, download them from their webpages and read their # documentation # # HP OfficeJet backend homepage: http://hpoj.sf.net/ # Uncomment the following line if hpoj is installed: #hpoj # # gt68xx backend homepage: http://www.meier-geinitz.de/sane/gt68xx-backend/ # Uncomment the following line if gt68xx is installed: #gt68xx snapscan.conf #------------------------------ General ----------------------------------- # Change to the fully qualified filename of your firmware file, if # firmware upload is needed by the scanner firmware /path/to/your/firmware/file.bin # If not automatically found you may manually specify a device name. # For USB scanners also specify bus=usb, e.g. # /dev/usb/scanner0 bus=usb # For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux. # /dev/sg0 #--------------------------------------------------------------------------- # No changes should be necessary below this line #--------------------------------------------------------------------------- #-------------------------- SCSI scanners ---------------------------------- # These SCSI devices will be probed automatically scsi AGFA * Scanner scsi COLOR * Scanner scsi Color * Scanner scsi ACERPERI * Scanner #--------------------------- USB scanners ----------------------------------- # These USB devices will be probed automatically # (This will currently work only on Linux) # Benq/Acer/Vuego 320U usb 0x04a5 0x2022 # Benq/Acer/Vuego 620U / 620UT usb 0x04a5 0x1a2a usb 0x04a5 0x2040 # Benq/Acer/Vuego 640U usb 0x04a5 0x2060 # Benq/Acer/Vuego 640BU usb 0x04a5 0x207e # Benq/Acer/Vuego 1240U usb 0x04a5 0x20c0 # Benq/Acer/Vuego 3300 / 4300 usb 0x04a5 0x20b0 # Benq/Acer/Vuego 4300 usb 0x04a5 0x20de # Benq/Acer/Vuego 5000 usb 0x04a5 0x20fc # Benq/Acer/Vuego 5300 usb 0x04a5 0x20fe # Agfa 1236U usb 0x06bd 0x0002 # Agfa 1212U usb 0x06bd 0x0001 usb 0x06bd 0x2061 # Agfa Snapscan e10 usb 0x06bd 0x2093 # Agfa Snapscan e20 usb 0x06bd 0x2091 # Agfa Snapscan e25 usb 0x06bd 0x2095 # Agfa Snapscan e26 usb 0x06bd 0x2097 # Agfa Snapscan e40 usb 0x06bd 0x208d # Agfa Snapscan e42 usb 0x06bd 0x20ff # Agfa Snapscan e50 usb 0x06bd 0x208f # Agfa Snapscan e52 usb 0x06bd 0x20fd #------------------------------ General ----------------------------------- # Change to the fully qualified filename of your firmware file, if # firmware upload is needed by the scanner firmware /path/to/your/firmware/file.bin # If not automatically found you may manually specify a device name. # For USB scanners also specify bus=usb, e.g. # /dev/usb/scanner0 bus=usb # For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux. # /dev/sg0 #--------------------------------------------------------------------------- # No changes should be necessary below this line #--------------------------------------------------------------------------- #-------------------------- SCSI scanners ---------------------------------- # These SCSI devices will be probed automatically scsi AGFA * Scanner scsi COLOR * Scanner scsi Color * Scanner scsi ACERPERI * Scanner #--------------------------- USB scanners ----------------------------------- # These USB devices will be probed automatically # (This will currently work only on Linux) # Benq/Acer/Vuego 320U usb 0x04a5 0x2022 # Benq/Acer/Vuego 620U / 620UT usb 0x04a5 0x1a2a usb 0x04a5 0x2040 # Benq/Acer/Vuego 640U usb 0x04a5 0x2060 # Benq/Acer/Vuego 640BU usb 0x04a5 0x207e # Benq/Acer/Vuego 1240U usb 0x04a5 0x20c0 # Benq/Acer/Vuego 3300 / 4300 usb 0x04a5 0x20b0 # Benq/Acer/Vuego 4300 usb 0x04a5 0x20de # Benq/Acer/Vuego 5000 usb 0x04a5 0x20fc # Benq/Acer/Vuego 5300 usb 0x04a5 0x20fe # Agfa 1236U usb 0x06bd 0x0002 # Agfa 1212U usb 0x06bd 0x0001 usb 0x06bd 0x2061 # Agfa Snapscan e10 usb 0x06bd 0x2093 # Agfa Snapscan e20 usb 0x06bd 0x2091 # Agfa Snapscan e25 usb 0x06bd 0x2095 # Agfa Snapscan e26 usb 0x06bd 0x2097 # Agfa Snapscan e40 usb 0x06bd 0x208d # Agfa Snapscan e42 usb 0x06bd 0x20ff # Agfa Snapscan e50 usb 0x06bd 0x208f # Agfa Snapscan e52 usb 0x06bd 0x20fd _ /etc/sane.d/acerfirm /etc/sane.d/U64V120.BIN /dev/usb/scanner0 usb 0x4a5 0x20be_ Результаты комманд: _export SANE_DEBUG_SNAPSCAN=2 scanimage -L _[root@localhost root]# export SANE_DEBUG_SNAPSCAN=2 [root@localhost root]# scanimage -L [sanei_debug] Setting debug level of snapscan to 2. [snapscan] add_scsi_device: error opening device /etc/sane.d/acerfirm: Invalid argument [snapscan] add_usb_device: error opening device libusb:001:002: Device busy Что не так сделано? Заранее благодарен за подробные ответы.
reply other threads:[~2003-03-27 22:24 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=3E837A12.4050701@narod.ru \ --to=cornerman@narod.ru \ --cc=community@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git