* Re: [Comm] Кто нибудь смог запустить mach64 dri?
2002-11-19 11:08 ` [Comm] ëÔÏ ÎÉÂÕÄØ ÓÍÏÇ ÚÁÐÕÓÔÉÔØ " Sergey Bolshakov
@ 2002-11-19 11:24 ` jin
2002-11-19 11:43 ` [Comm] ëÔÏ ÎÉÂÕÄØ ÓÍÏÇ ÚÁÐÕÓÔÉÔØ " Sergey Bolshakov
0 siblings, 1 reply; 11+ messages in thread
From: jin @ 2002-11-19 11:24 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 555 bytes --]
Sergey Bolshakov пишет:
> >>>>>"jin" == jin writes:
>
> [skipped]
> >> Установка свелась к сбору dri-модуля mach64, раскладке XFree-related
> >> модулей по местам и небольшой правке XF86Config. Одно но: на домашней
> >> машине (там k6-2) заставить работать не удалось - валится по SIGILL.
> >>
> > Вот и я так же сделал, но увы:(( Ничего хорошего. Только по сравнению с
> > августовской версией эта у меня еще пока ни разу не падала при
> переключении
> > из Х в консоль.
> /etc/X11/XF86Config и /var/log/XFree.?.log покажите.
>
>
В аттаче...
[-- Attachment #2: XFree86.0.log --]
[-- Type: text/plain, Size: 28966 bytes --]
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-alt7-smp i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Nov 19 14:42:46 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "ATI Mach64"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "ru"
(**) XKB: layout: "ru"
(**) Option "XkbVariant" "winkeys"
(**) XKB: variant: "winkeys"
(**) Option "XkbOptions" "grp:ctrl_shift_toggle"
(**) XKB: options: "grp:ctrl_shift_toggle"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x800100fc, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 1043,8027 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 12 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 12 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1043,8027 rev 12 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 1043,8027 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 1043,8027 rev 12 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 1043,8027 rev 12 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4742 card 1002,0084 rev 5c class 03,00,00 hdr 00
(II) PCI: 02:0c:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xf5800000 - 0xf7dfffff (0x2600000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xf7f00000 - 0xf7ffffff (0x100000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0xf5000000 - 0xf57fffff (0x800000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0xf7e00000 - 0xf7efffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI Mach64 GB rev 92, Mem @ 0xf6000000/24, 0xf5800000/12, I/O @ 0xd800/8, BIOS @ 0xf7fe0000/17
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xf5000000 - 0xf50000ff (0x100) MX[B]
[1] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[2] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[3] -1 0xf5800000 - 0xf5800fff (0x1000) MX[B](B)
[4] -1 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[5] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[6] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[7] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[8] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[9] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[10] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xf5000000 - 0xf50000ff (0x100) MX[B]
[1] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[2] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[3] -1 0xf5800000 - 0xf5800fff (0x1000) MX[B](B)
[4] -1 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[5] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[6] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[7] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[8] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[9] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[10] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf5000000 - 0xf50000ff (0x100) MX[B]
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[7] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[8] -1 0xf5800000 - 0xf5800fff (0x1000) MX[B](B)
[9] -1 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[13] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[14] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[15] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[16] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[17] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "ATI Mach64".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device" section "ATI Mach64".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf5000000 - 0xf50000ff (0x100) MX[B]
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[7] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[8] -1 0xf5800000 - 0xf5800fff (0x1000) MX[B](B)
[9] -1 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[13] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[14] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[15] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[16] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[17] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf5000000 - 0xf50000ff (0x100) MX[B]
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[7] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[8] -1 0xf5800000 - 0xf5800fff (0x1000) MX[B](B)
[9] -1 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[16] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[17] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[18] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[19] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[20] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[21] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 16, (--) framebuffer bpp 16
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8192 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64GT
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level 2
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read successfully
(II) ATI(0): Manufacturer: CTX Model: 5700 Serial#: 0
(II) ATI(0): Year: 2001 Week: 0
(II) ATI(0): EDID Version: 1.1
(II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) ATI(0): Signal levels configurable
(II) ATI(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) ATI(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
(II) ATI(0): Gamma: 2.10
(II) ATI(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) ATI(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.605
(II) ATI(0): blueX: 0.151 blueY: 0.070 whiteX: 0.283 whiteY: 0.297
(II) ATI(0): Supported VESA Video Modes:
(II) ATI(0): 720x400@70Hz
(II) ATI(0): 640x480@60Hz
(II) ATI(0): 640x480@67Hz
(II) ATI(0): 640x480@72Hz
(II) ATI(0): 640x480@75Hz
(II) ATI(0): 800x600@60Hz
(II) ATI(0): 800x600@72Hz
(II) ATI(0): 800x600@75Hz
(II) ATI(0): 832x624@75Hz
(II) ATI(0): 1024x768@87Hz (interlaced)
(II) ATI(0): 1024x768@60Hz
(II) ATI(0): 1024x768@70Hz
(II) ATI(0): 1024x768@75Hz
(II) ATI(0): 1152x870@75Hz
(II) ATI(0): Manufacturer's mask: 0
(II) ATI(0): Supported Future Video Modes:
(II) ATI(0): #0: hsize: 640 vsize 480 refresh: 120 vid: 31793
(II) ATI(0): #1: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) ATI(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) ATI(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 56.2 MHz Image Size: 270 x 202 mm
(II) ATI(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
(II) ATI(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 36.0 MHz Image Size: 270 x 202 mm
(II) ATI(0): h_active: 640 h_sync: 672 h_sync_end 720 h_blank_end 832 h_border: 0
(II) ATI(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 509 v_border: 0
(II) ATI(0): Supported additional Video Mode:
(II) ATI(0): clock: 94.5 MHz Image Size: 270 x 202 mm
(II) ATI(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) ATI(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) ATI(0): Ranges: V min: 50 V max: 130 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(--) ATI(0): ATI 3D Rage Pro graphics controller detected.
(--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0xD800.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xF67FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xF6000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xF5800400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xF5800000.
(==) ATI(0): Write-combining range (0xf6000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): monitor1: Using hsync range of 30.00-70.00 kHz
(II) ATI(0): monitor1: Using vrefresh range of 70.00-130.00 Hz
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x600" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (vrefresh out of range)
(II) ATI(0): Not using default mode "1280x960" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x480" (vrefresh out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x512" (vrefresh out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (hsync out of range)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (hsync out of range)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync out of range)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync out of range)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) ATI(0): Not using default mode "700x525" (vrefresh out of range)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1024" (vrefresh out of range)
(II) ATI(0): Not using default mode "800x512" (vrefresh out of range)
(II) ATI(0): Not using default mode "1920x1200" (hsync out of range)
(II) ATI(0): Not using default mode "960x600" (hsync out of range)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) ATI(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) ATI(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(--) ATI(0): Display dimensions: (280, 210) mm
(--) ATI(0): DPI set to (92, 92)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xf5800000 - 0xf5800fff (0x1000) MS[B]
[1] 0 0xf6000000 - 0xf6ffffff (0x1000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xf5000000 - 0xf50000ff (0x100) MX[B]
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[9] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[10] -1 0xf5800000 - 0xf5800fff (0x1000) MX[B](B)
[11] -1 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[12] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[15] 0 0x0000d800 - 0x0000d8ff (0x100) IS[B]
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[19] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[20] -1 0x0000e800 - 0x0000e80f (0x10) IX[B]
[21] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[22] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[23] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[24] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[25] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xf6000000,0x800000)
(II) ATI(0): [drm] SAREA 2200+1208: 3408
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) ATI(0): [drm] drmSetBusid failed (7, PCI:1:0:0), Permission denied
(EE) ATI(0): [dri] DRIScreenInit Failed
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 1024 x 3327 rectangle at 0,768
(II) ATI(0): 512 x 3328 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Option "dpms" "on"
(**) ATI(0): DPMS enabled
(II) ATI(0): Direct rendering disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IntelliMouse"
(**) Mouse1: Protocol: "IntelliMouse"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/ttyS0"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: BaudRate: 1200
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(**) Option "BaudRate" "1200"
[-- Attachment #3: XF86Config-4 --]
[-- Type: text/plain, Size: 5752 bytes --]
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "ru"
Option "XkbVariant" "winkeys"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IntelliMouse"
Option "Device" "/dev/ttyS0"
Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-70
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 70-130
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Mach64"
VendorName "Unknown"
BoardName "Unknown"
Driver "ati"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "ATI Mach64"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
^ permalink raw reply [flat|nested] 11+ messages in thread