Re: [mdk-re] XFConfig-4

["Vadim V. Zhytnikov" <vvzhy@mail.ru>]

[-- Attachment #1: Type: text/plain, Size: 965 bytes --]



Vladimir Karpinsky wrote:

> Здравствуйте,
>
> Я тут уже писал об этом, куда-то тема ускользнула, попробую
> повториться. Имеется ноутбук, соответственно с ТФТ монитором,
> видеокарта --- C&T45555, 4МБ видемозгов. В МДК 6.1 родном все работало
> и путем нехитрой правки моделайнов и конфиге удалось настроить штатное
> 1024х768 на 24 бит цвета. После установки "Весны" по умолчанию встали
> Х 4.0.3, для которых настроить более 8 бит цветности я не смог.
> Пытался пользоваться kvideogen, вставлял генерируемую ею строку в
> XFConfig-4, но Х ее напрочь игнорирует. Спрашивается:
>
> 1. Изменился ли формат представления моделайнов в конфиге? Если нет,
> то почему не принимается старая строка, если да, то как это должно
> быть прописано сейчас?
>

Сам формат ModeLine не изменился. Может поможет мой XF86Config-4
в роли примера. Обратите на UseModes в секции Monitor и сами моды
в конце файла.

--

[ Vadim V. Zhytnikov  <vvzhy@mail.ru>  <vvzhy@td.lpi.ac.ru> ]


[-- Attachment #2: XF86Config-4 --]
[-- Type: text/plain, Size: 6440 bytes --]


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "ru"
    Option "XkbVariant"  "winkeys"
    Option "XkbOptions"  "grp:ctrl_shift_toggle"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "MouseManPlusPS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
#    Option "BaudRate" "1200"
    Option "Resolution" "800"
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.

    Load	"dbe"

    Load	"glx"
    Load	"dri"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection


Section "DRI"
    Mode	0666
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Iiyama|Iiyama MT-9017E/T,       VisionMaster Pro"
    VendorName "Iiyama"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  27-92


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-160

    UseModes "ati_radeon_iiyama"

EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "ATI Radeon (generic)"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "radeon"
#    VideoRam    32768
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "DPMS"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
    Device      "ATI Radeon (generic)"
    Monitor     "Iiyama|Iiyama MT-9017E/T,       VisionMaster Pro"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
    InputDevice "Mouse1" "CorePointer"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Modes"

    Identifier "ati_radeon_iiyama"
	# ATI Radeon with Iiyama Vision Master Pro 17 MT-9017
	#  640x480-120-160Hz  800x600-120Hz  1024x768-100Hz
        ModeLine "640x480"    52.425  640  684  748  848  480 481 484 515 -hsync +vsync
        # ModeLine "640x480"    72.90   640  684  762  864  480 481 484 527 -hsync +vsync
        ModeLine "800x600"    84.04   800  860  948 1088  600 601 604 643 -hsync +vsync
        ModeLine "1024x768"  112.80  1024 1101 1213 1392  768 768 771 810 -hsync +vsync
	
EndSection