Re: [mdk-re] XFree86 for mach64

["Vadim V. Zhytnikov" <vvzhy@mail.ru>]

[-- Attachment #1: Type: text/plain, Size: 5314 bytes --]



Ruslan wrote:

>  Hi!
> > > Ищу самый свежий mach64 сервер, чтобы заработала наконец моя видяха.
> > > Вручную настроить параметры "не по зубам", но, говорят, что в новых
> версиях
> > > учтены баги старых.
> > >
> > А в чём проблема? Я использую mach64 на двух разных картах Rage II+ и Rage
> Pro
> > на XFree начиная с 3.3.3 и вплоть до последнего 4.0.3 b и не испытываю
> никаких
> > трудностей. Совсем никаких.
>
> А у меня черный экран. Как только startx'ишся, так сразу все падает.
> На http://www.xfree86.org/3.3.6/ati6.html написано, что так и надо....
> У меня  вот какая видяха : ATI-264GT2PLUS - TEKRAM M250 -ATI  Rage
> II-3D-mach64
>

Да почитал этоу ссылочку. Возможно, что именно Вам не повезло и Вы столкнулись
с одной из указанных проблем. Однако Вы неправильно поняли, что "что так и
должно быть".
В подавляющем большинстве случаев ATI mach64 карты работают прекрасно.
Конечно конкретно Вам от этого не легче :( но есть надежда.

>
> Можно попросить прислать/дать ссылочку на 4.0.3 b для mach64 , а также Ваш
> XF86Config?
> Спасибо!
>

Я приложил свои XF86Config (для XFree 3.3.x) и XF86Config-4 (для XFree 4.0.x).
НЕ ИСПОЛЬЗУЙТЕ ИХ БЕЗ МОДИФИКАЦИИ! Там прописаны 100Гц моды.
Возможно, что Ваш монитор их не поддерживает и может сделать ку-ку навсегда.

Что делать? Можно поиграть с настройками. Но из нижеприложенного лога
следует, что у Вас XFree 3.3.x. Может быть просто стоит попробовать XFree 4.0.3
(b это моя опечатка ;-)?  Он входит в состав Spring 2001. Кроме того на
ftp.altlinux.ru есть директория Dedalus с самой последней пре 4.1 версией XFree
(4.0.9-что-то-там...).


>
> Из моего autologin.log:
> Operating System: Linux 2.2.17-16mdksmp i686 [ELF]
> Configured drivers:
>   Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 1)
> (using VT number 7)
> XF86Config: /etc/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: disabled
> (**) XKB: keycodes: "xfree86"
> (**) XKB: types: "default"
> (**) XKB: compat: "default"
> (**) XKB: symbols: "us(pc105)"
> (**) XKB: geometry: "pc"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc105"
> (**) XKB: layout: ""
> (**) Mouse: type: IMPS/2, device: /dev/psaux, buttons: 5
> (**) Mouse: zaxismapping: (-)4 (+)5
> (**) Mach64: Graphics device ID: "ATI Mach64 3D RAGE II"
> (**) Mach64: Monitor ID: "Generic|SVGA Высокой Частоты, 1024x768 при 70 Hz"
> (--) Mach64: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted.
> (--) Mach64: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
> (--) Mach64: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
> (--) Mach64: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
> (--) Mach64: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> (--) Mach64: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> (--) Mach64: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> (--) Mach64: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> (--) Mach64: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> (--) Mach64: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> (--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> (--) Mach64: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> (--) Mach64: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> (--) Mach64: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> (--) Mach64: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> (--) Mach64: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> (--) Mach64: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> (--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> (--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> (--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> (--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> (**) FontPath set to "unix/:-1"
> (--) Mach64: PCI: Mach64 GT rev 154, Aperture @ 0xe4000000, Registers @
> 0xe6000000, Block I/O @ 0xe400
> (**) Mach64: Option "power_saver"
> (--) Mach64: Card type: PCI
> (--) Mach64: Memory type: EDO (2)
> (--) Mach64: Clock type: Internal
> (--) Mach64: Maximum allowed dot-clock: 200.000 MHz
> (**) Mach64: Mode "800x600": mode clock =  60.750
> (--) Mach64: Illegal mode according to Mach64 BIOS
> (--) Mach64: Removing mode "800x600" from list of valid modes.
> (**) Mach64: Mode "640x480": mode clock =  36.000
> (--) Mach64: Virtual resolution: 640x480
> (--) Mach64: Video RAM: 2048k
> (--) Mach64: Using hardware cursor
> (--) Mach64: Using 16 MB aperture @ 0xe4000000
> (--) Mach64: Using 4 KB register aperture @ 0xe6000000
> (--) Mach64: Ramdac is Internal
> (--) Mach64: Ramdac speed: 200 MHz
> Mach64: Cannot read colourmap from VGA.  Will restore with default
> (--) Mach64: Pixmap cache: 0 256x256 slots, 0 128x128 slots, 0 64x64 slots
> (--) Mach64: Font cache: 0 fonts
> x128 slots, 0 64x64 slots
> (--) Mach64: Font cache: 0 fonts
>
> --
> Sayonara,
> Ruslan
> St. Petersburg, Russia
> ruslan@mail.ru
> ICQ: 12331863
>
> _______________________________________________
> Mandrake-russian mailing list
> Mandrake-russian@altlinux.ru
> http://altlinux.ru/mailman/listinfo/mandrake-russian

--

[ Vadim V. Zhytnikov  <vvzhy@mail.ru>  <vvzhy@td.lpi.ac.ru> ]


[-- Attachment #2: XF86Config --]
[-- Type: text/plain, Size: 4707 bytes --]

#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"
    AutoRepeat  500 5
    
    LeftAlt         Meta
    RightAlt        Meta
    ScrollLock      Compose
    RightCtl        Control

    XkbKeycodes     "xfree86"
    XkbTypes        "default"
    XkbCompat       "default"
    XkbSymbols      "us(pc104)"
    XkbGeometry     "pc"
    XkbRules        "xfree86"
    XkbOptions      "grp:ctrl_shift_toggle"
    XkbModel        "pc104"
#    XkbLayout       "rums"
    XkbLayout       "ru"
    XkbVariant      "winkeys"

#  grp:switch		  CapsLock changes group, R-Alt switches group while pressed
#  grp:toggle		  Right Alt key changes group
#  grp:shift_toggle 	  Both Shift keys together change group
#  grp:ctrl_shift_toggle  Control+Shift changes group
#  grp:ctrl_alt_toggle	  Alt+Control changes group


EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "MouseManPlusPS/2"
#    Protocol    "IMPS/2"
#    Protocol    "PS/2"
#    Protocol    "MouseSystem"
    Device      "/dev/mouse"
#    Device      "/dev/gpmdata"
    BaudRate    1200
    Resolution  400
    ZAxisMapping 4 5
    Buttons      3
#    Emulate3Buttons
#    Emulate3Timeout    200
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

   Identifier      "Primary Monitor"
   VendorName      "Iiyama"
   ModelName       "Vision Master Pro 17"
   BandWidth       160
   HorizSync       27.0-92.0 
   VertRefresh     50-160

   Mode "1024x768"
       DotClock	110.00
       HTimings	1024 1041 1174 1368
       VTimings	768 770 784 810
       Flags	"-hsync" "-vsync"
   EndMode

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
   Identifier      "Primary Card"
   VendorName      "ATI"
   BoardName       "ATI Mach64 3D RAGE PRO, Internal RAMDAC"
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
   Driver          "Accel"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   BlankTime       0
   SuspendTime     0
   OffTime         0
   SubSection "Display"
      Depth        32
      Modes        "1024x768" 
   EndSubSection
EndSection

Section "Screen"
   Driver          "VGA2"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   BlankTime       0
   SuspendTime     0
   OffTime         0
   SubSection "Display"
      Depth        1
      Modes        "1024x768"
   EndSubSection
EndSection

Section "Screen"
   Driver          "VGA16"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   BlankTime       0
   SuspendTime     0
   OffTime         0
   SubSection "Display"
      Depth        4
      Modes        "1024x768"
   EndSubSection
EndSection

Section "Screen"
   Driver          "SVGA"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   BlankTime       0
   SuspendTime     0
   OffTime         0
   SubSection "Display"
      Depth        16
      Modes        "1024x768"
   EndSubSection
EndSection



[-- Attachment #3: XF86Config-4 --]
[-- Type: text/plain, Size: 5949 bytes --]


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "ru"
    Option "XkbVariant"  "winkeys"
    Option "XkbOptions"  "grp:ctrl_shift_toggle"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "MouseManPlusPS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
#    Option "BaudRate" "1200"
    Option "Resolution" "800"
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.

    Load	"dbe"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Iiyama|Iiyama MT-9017E/T,       VisionMaster Pro"
    VendorName "Iiyama"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  27-92


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-160

    UseModes "ati_1024_100Hz"

EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "ATI Mach64"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "ati"
#    VideoRam    4096
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "DPMS"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
    Device      "ATI Mach64"
    Monitor     "Iiyama|Iiyama MT-9017E/T,       VisionMaster Pro"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
    InputDevice "Mouse1" "CorePointer"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Section "Modes"

    Identifier "ati_1024_100Hz"
        ModeLine "1024x768"  110  1024 1053 1186 1360  768 770 784 798
	
EndSection