[Comm] образ hetzner

[Comm] образ hetzner

[Мал Скрылёв]

[-- Attachment #1: Type: text/plain, Size: 284 bytes --]

Приветствую,

а никто не баловался с установкою ветки 8 на hetzner-е?

Собственно я попытался, но тот просит некоторый файл установки update-initramfs

лог прицепом.

[-- Attachment #2: debug.txt --]
[-- Type: text/plain, Size: 4586 bytes --]


[16:57:37] # starting installimage on [ 46.4.117.162 ]
[16:57:37] -------------------------------------
[16:57:38] :   Hardware data:
[16:57:38] :   CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (Cores 8)
[16:57:38] :   Memory:  11989 MB
[16:57:38] :   Disk /dev/sda: 1500 GB (=> 1397 GiB) doesn't contain a valid partition table
[16:57:38] :   Disk /dev/sdb: 1500 GB (=> 1397 GiB) doesn't contain a valid partition table
[16:57:38] :   Total capacity 2794 GiB with 2 Disks
[16:57:38] -------------------------------------
[16:57:38] # make clean config
[16:57:38] # executing setupfile
[16:57:38] # checking if the script is disabled
[16:57:38] # starting menu...
[16:57:45] # chosen image: [ custom ]
[16:57:45] # copy & create config...
[16:57:45] # Systype: MS-7522
[16:57:45] # Manufacturer: MSI
[17:25:12] # starting mcedit...
[17:25:14] # validating vars...
[17:25:14] :   swap : 6144
[17:25:14] :   /boot : 512
[17:25:14] :   / : all
[17:25:14] => FAILED
[17:25:14] # starting mcedit...
[17:33:05] # validating vars...
[17:33:05] :   swap : 6144
[17:33:05] :   /boot : 512
[17:33:05] :   / : all
[17:33:13] => FAILED
[17:33:13] # starting mcedit...
[17:33:51] # validating vars...
[17:33:51] :   swap : 6144
[17:33:51] :   /boot : 512
[17:33:52] :   / : all
[17:33:53] => FAILED
[17:33:53] # starting mcedit...
[17:35:00] # validating vars...
[17:35:00] :   swap : 6144
[17:35:00] :   / : all
[17:35:08] => FAILED
[17:35:08] # starting mcedit...
[17:35:54] # validating vars...
[17:35:54] :   swap : 6144
[17:35:54] :   / : all
[17:35:55] :   Size of the first hdd is: 1500301910016
[17:35:55] :   check_dos_partitions
[17:35:55] # asking for confirmation...
[17:36:00] # Confirmation for drive /dev/sda accepted
[17:36:00] # executing installfile...
[17:36:00] :   swap : 6144
[17:36:00] :   / : all
[17:36:00] :   check_dos_partitions
[17:36:00] # load debian specific functions...
[17:36:00] # Deleting partitions
[17:36:00] # Deleting partitions on /dev/sda
[17:36:01] # Test partition size
[17:36:01] :   check_dos_partitions
[17:36:01] # Creating partitions and /etc/fstab
[17:36:01] # Creating partitions on /dev/sda
[17:36:01] :   deactivate all dm-devices with dmraid and dmsetup
[17:36:01] :   no block devices found
[17:36:02] :   create partition: parted -s /dev/sda mkpart primary linux-swap 2048s 12584959s
[17:36:02] :   create partition: parted -s /dev/sda mkpart primary ext3 12584960s 2930275119s
[17:36:02] :   reread partition table after 5 seconds
[17:36:07] :   deactivate all dm-devices with dmraid and dmsetup
[17:36:07] :   no block devices found
[17:36:11] # formatting  /dev/sda1  with  swap
[17:36:12] :   Setting up swapspace version 1, size = 6291452 KiB
[17:36:12] :   no label, UUID=475e670a-4c0e-4baa-8866-1ebade30da6a
[17:36:16] # formatting  /dev/sda2  with  ext4
[17:36:23] # Mounting partitions
[17:36:23] # Sync time via ntp
[17:36:23] :   Using standard Hetzner Online GmbH pubkey: /root/.oldroot/nfs/install/gpg/public-key.asc
[17:36:23] :   gpg: directory `/root/.gnupg' created
[17:36:23] :   gpg: new configuration file `/root/.gnupg/gpg.conf' created
[17:36:23] :   gpg: WARNING: options in `/root/.gnupg/gpg.conf' are not yet active during this run
[17:36:23] :   gpg: keyring `/root/.gnupg/secring.gpg' created
[17:36:23] :   gpg: keyring `/root/.gnupg/pubring.gpg' created
[17:36:23] :   gpg: /root/.gnupg/trustdb.gpg: trustdb created
[17:36:23] :   gpg: key B8F0F463: public key "Hetzner Online AG, RZ-Softwareentwicklung (Signing Key 2013) <info@hetzner.de>" imported
[17:36:23] :   gpg: Total number processed: 1
[17:36:23] :   gpg:               imported: 1  (RSA: 1)
[17:36:23] # Validating image before starting extraction
[17:36:23] # Extracting image (local)
[17:37:08] # Setting up network for eth0
[17:37:08] setting up ipv6 networking 2a01:4f8:140:6191::2/64 via fe80::1
[17:37:08] mtab is already a symlink
[17:37:08] # Setting hostname
[17:37:08] # executing chroot command: hostname cygnus
[17:37:08] # set new hostname 'cygnus' in /installimage.tsH4F/hdd/etc/sysconfig/network
[17:37:08] # Generating new SSH keys
[17:37:08] skipping rsa1 key gen
[17:37:08] skipping dsa key gen
[17:37:08] skipping rsa key gen
[17:37:08] skipping ecdsa key gen
[17:37:08] skipping ed25519 key gen
[17:37:08] # Generating ramdisk
[17:37:08] # Kernel Version found: 
[17:37:08] # executing chroot command: update-initramfs -u -k 
[17:37:08] :   bash: update-initramfs: command not found
[17:37:08] => FAILED
[17:37:08] :   report install.conf to rz-admin: 436613
[17:37:08] :   report debug.txt to rz-admin: ok
[17:37:08] cleaning up

Re: [Comm] образ hetzner

[Michael Shigorin]

On Fri, Dec 16, 2016 at 07:47:58PM +0300, Мал Скрылёв wrote:
> Собственно я попытался, но тот просит некоторый файл установки update-initramfs

Видимо, придётся в качестве такого подложить скрипт,
дёргающий make-initrd:

> [17:37:08] # Generating ramdisk
> [17:37:08] # Kernel Version found: 
> [17:37:08] # executing chroot command: update-initramfs -u -k 
> [17:37:08] :   bash: update-initramfs: command not found
> [17:37:08] => FAILED

А вообще хорошо бы наработать рекомендации или готовый образ
-- если кому ещё интересно, может получиться и стартеркит.

-- 
 ---- WBR, Michael Shigorin / http://altlinux.org
  ------ http://opennet.ru / http://anna-news.info