* [Comm] USB modem в p7 @ 2013-08-12 12:33 Chernetsky Andrey 2013-08-12 12:52 ` Andrii Dobrovol`s`kii ` (2 more replies) 0 siblings, 3 replies; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-12 12:33 UTC (permalink / raw) To: ALT Community Система KDesktop 7.0, попробовал подключится к Интернету через usb модем Huawei E303, подключается нормально, но почему то NM его видит не как usb modem, а как сетевую карту, пишет: проводное сетевое соединение "Автоматическое (Ethernet) установлено. В Центре управления системы, также как сетевая карта с интерфейсом enp0s29f7u2. С телефоном GT-S6102, при его использовании как модем, аналогично. andy@mycomp ~ $ lsusb Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 020: ID 12d1:14db Huawei Technologies Co., Ltd. Bus 005 Device 002: ID 5986:0313 Acer, Inc Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub andy@mycomp ~ $ dmesg| tail [ 5496.966910] systemd-udevd[23454]: renamed network interface eth0 to enp0s29f7u2 [ 6300.944149] usb 1-1: new low-speed USB device number 3 using uhci_hcd [ 6301.118245] usb 1-1: New USB device found, idVendor=093a, idProduct=2510 [ 6301.118261] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6301.118271] usb 1-1: Product: USB OPTICAL MOUSE [ 6301.118280] usb 1-1: Manufacturer: PIXART [ 6302.657792] usbcore: registered new interface driver usbhid [ 6302.657801] usbhid: USB HID core driver [ 6302.810313] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input10 [ 6302.813027] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0 -- С уважением, Андрей! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 12:33 [Comm] USB modem в p7 Chernetsky Andrey @ 2013-08-12 12:52 ` Andrii Dobrovol`s`kii 2013-08-12 15:15 ` Chernetsky Andrey 2013-08-12 13:20 ` Vasiliy D.Sevostyanov , 2013-08-13 16:24 ` Sergey Vlasov 2 siblings, 1 reply; 17+ messages in thread From: Andrii Dobrovol`s`kii @ 2013-08-12 12:52 UTC (permalink / raw) To: ALT Linux Community general discussions -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Chernetsky Andrey wrote: > Система KDesktop 7.0, попробовал подключится к Интернету через > usb модем Huawei E303, подключается нормально, но почему то NM > его видит не как usb modem, а как сетевую карту, пишет: > проводное сетевое соединение "Автоматическое (Ethernet) > установлено. В Центре управления системы, также как сетевая > карта с интерфейсом enp0s29f7u2. С телефоном GT-S6102, при его > использовании как модем, аналогично. > > andy@mycomp ~ $ lsusb Bus 001 Device 003: ID 093a:2510 Pixart > Imaging, Inc. Optical Mouse Bus 001 Device 001: ID 1d6b:0001 > Linux Foundation 1.1 root hub Bus 005 Device 020: ID 12d1:14db > Huawei Technologies Co., Ltd. Bus 005 Device 002: ID 5986:0313 > Acer, Inc Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 > root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 > root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 > root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 > root hub > > andy@mycomp ~ $ dmesg| tail [ 5496.966910] > systemd-udevd[23454]: renamed network interface eth0 to > enp0s29f7u2 [ 6300.944149] usb 1-1: new low-speed USB device > number 3 using uhci_hcd [ 6301.118245] usb 1-1: New USB device > found, idVendor=093a, idProduct=2510 [ 6301.118261] usb 1-1: > New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ > 6301.118271] usb 1-1: Product: USB OPTICAL MOUSE [ 6301.118280] > usb 1-1: Manufacturer: PIXART [ 6302.657792] usbcore: > registered new interface driver usbhid [ 6302.657801] usbhid: > USB HID core driver [ 6302.810313] input: PIXART USB OPTICAL > MOUSE as > /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input10 > > [ 6302.813027] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse > [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0 > > > Так а что собственно Вас беспокоит? - -- Rgrds, Andriy ********************************************************************* email: dobr at iop dot kiev dot ua Kyiv, Ukraine Phone: (380-44) 525-7824 Department of Gas Electronics Fax: (380-44) 525-2329 Institute of Physics of NASU ********************************************************************* -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (GNU/Linux) Comment: Using GnuPG with SeaMonkey - http://www.enigmail.net/ iF4EAREIAAYFAlII2pcACgkQpBPgR3404hOLIgD/QvIddHGE649w+q8ZLLehmAdH 6jjiDeSx8qIDCu0n+BsA/1GdcS76W0CwBWKbVFzRFItv+jbRT+8qh5FjVCRf7WNd =vdMr -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 12:52 ` Andrii Dobrovol`s`kii @ 2013-08-12 15:15 ` Chernetsky Andrey 2013-08-12 15:15 ` Anton Gorlov 0 siblings, 1 reply; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-12 15:15 UTC (permalink / raw) To: community Andrii Dobrovol`s`kii wrote: > > > > > Так а что собственно Вас беспокоит? > - -- То что usb модем определяется как сетевая карта, мне кажется так не должно быть, хоть все и работает -- С уважением, Андрей! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 15:15 ` Chernetsky Andrey @ 2013-08-12 15:15 ` Anton Gorlov 2013-08-12 15:26 ` Chernetsky Andrey 0 siblings, 1 reply; 17+ messages in thread From: Anton Gorlov @ 2013-08-12 15:15 UTC (permalink / raw) To: ALT Linux Community general discussions 12.08.2013 19:15, Chernetsky Andrey пишет: > То что usb модем определяется как сетевая карта, мне кажется так не должно быть, хоть > все и работает если можем 4г..то вроде как они и прикидываются сетевой картой ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 15:15 ` Anton Gorlov @ 2013-08-12 15:26 ` Chernetsky Andrey 0 siblings, 0 replies; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-12 15:26 UTC (permalink / raw) To: community Anton Gorlov wrote: > 12.08.2013 19:15, Chernetsky Andrey пишет: > > То что usb модем определяется как сетевая карта, мне кажется так не должно быть, хоть > > все и работает > если можем 4г..то вроде как они и прикидываются сетевой картой Да нет они 3G, проверял на телефоне, Huawei e303 и Huawei e173, все определяются как сетевая карта -- С уважением, Андрей! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 12:33 [Comm] USB modem в p7 Chernetsky Andrey 2013-08-12 12:52 ` Andrii Dobrovol`s`kii @ 2013-08-12 13:20 ` Vasiliy D.Sevostyanov , 2013-08-12 15:08 ` Chernetsky Andrey 2013-08-13 16:24 ` Sergey Vlasov 2 siblings, 1 reply; 17+ messages in thread From: Vasiliy D.Sevostyanov , @ 2013-08-12 13:20 UTC (permalink / raw) To: ALT Linux Community general discussions Hi, Chernetsky Andrey, you wrote 15:33 Mon 12 Aug : > Bus 005 Device 020: ID 12d1:14db Huawei Technologies Co., Ltd. > andy@mycomp ~ $ dmesg| tail > [ 5496.966910] systemd-udevd[23454]: renamed network interface eth0 to enp0s29f7u2 Ваш лог касается мыши. Приведите выхлоп `dmesg | grep -A 20 -B 2 -i 12d1 ` И проверьте пакет udev ( `rpm -V udev udev-extras udev-hwdb udev-rules udev_static-addon libudev1` ) -- здесь мои пакеты, у Вас список может быть немного другой. -- С уважением, Василий Д. Севостьянов. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 13:20 ` Vasiliy D.Sevostyanov , @ 2013-08-12 15:08 ` Chernetsky Andrey 2013-08-12 17:06 ` Vasiliy D.Sevostyanov , 0 siblings, 1 reply; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-12 15:08 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 1280 bytes --] Vasiliy D.Sevostyanov , wrote: > Hi, Chernetsky Andrey, you wrote 15:33 Mon 12 Aug : > > > Bus 005 Device 020: ID 12d1:14db Huawei Technologies Co., Ltd. > > > andy@mycomp ~ $ dmesg| tail > > [ 5496.966910] systemd-udevd[23454]: renamed network interface eth0 to enp0s29f7u2 > Ваш лог касается мыши. > Приведите выхлоп `dmesg | grep -A 20 -B 2 -i 12d1 ` файл во вложении > И проверьте пакет udev ( `rpm -V udev udev-extras udev-hwdb udev-rules udev_static-addon libudev1` ) -- здесь мои пакеты, у Вас список может быть немного другой. andy@mycomp ~ $ rpm -qa |grep udev python-module-pyudev-0.14-alt1 udev-201-alt1.M70P.1 libudev1-201-alt1.M70P.1 udev_static-addon-0.2-alt6 udev-hwdb-201-alt1.M70P.1 system-config-printer-udev-1.3.13-alt2 udev-extras-201-alt1.M70P.1 udev-rule-generator-cdrom-201-alt1.M70P.1 udev-rules-201-alt1.M70P.1 libgudev-201-alt1.M70P.1 > > -- > С уважением, Василий Д. Севостьянов. > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением, Андрей! [-- Attachment #2: dmesg.txt --] [-- Type: text/plain, Size: 18192 bytes --] [ 59.173672] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 148.196104] usb 5-8: new high-speed USB device number 4 using ehci-pci [ 148.330481] usb 5-8: New USB device found, idVendor=12d1, idProduct=1446 [ 148.330496] usb 5-8: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 148.330507] usb 5-8: Product: HUAWEI Mobile [ 148.330516] usb 5-8: Manufacturer: HUAWEI Technology [ 148.542618] Initializing USB Mass Storage driver... [ 148.545673] scsi4 : usb-storage 5-8:1.0 [ 148.547363] scsi5 : usb-storage 5-8:1.1 [ 148.547636] usbcore: registered new interface driver usb-storage [ 148.547642] USB Mass Storage support registered. [ 149.445022] usb 5-8: USB disconnect, device number 4 [ 153.512115] usb 5-8: new high-speed USB device number 5 using ehci-pci [ 153.646631] usb 5-8: New USB device found, idVendor=12d1, idProduct=1436 [ 153.646646] usb 5-8: New USB device strings: Mfr=4, Product=3, SerialNumber=0 [ 153.646657] usb 5-8: Product: HUAWEI Mobile [ 153.646666] usb 5-8: Manufacturer: HUAWEI Technology [ 153.655876] scsi11 : usb-storage 5-8:1.5 [ 153.659247] scsi12 : usb-storage 5-8:1.6 [ 153.717858] usbcore: registered new interface driver usbserial [ 153.717921] usbcore: registered new interface driver usbserial_generic [ 153.717967] usbserial: USB Serial support registered for generic [ 153.740237] usbcore: registered new interface driver option [ 153.740294] usbserial: USB Serial support registered for GSM modem (1-port) [ 153.740551] option 5-8:1.0: GSM modem (1-port) converter detected [ 153.755209] usb 5-8: GSM modem (1-port) converter now attached to ttyUSB0 [ 153.755340] option 5-8:1.3: GSM modem (1-port) converter detected [ 153.759491] usb 5-8: GSM modem (1-port) converter now attached to ttyUSB1 [ 153.759559] option 5-8:1.4: GSM modem (1-port) converter detected [ 153.762453] usb 5-8: GSM modem (1-port) converter now attached to ttyUSB2 [ 153.800801] cdc_ether 5-8:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-8, Mobile Broadband Network Device, 02:50:f3:00:00:00 [ 153.800908] usbcore: registered new interface driver cdc_ether [ 153.846091] systemd-udevd[3485]: renamed network interface wwan0 to wwp0s29f7u8i1 [ 154.657817] scsi 12:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 -- [ 227.017369] option 5-8:1.4: device disconnected [ 350.888121] usb 5-2: new high-speed USB device number 6 using ehci-pci [ 351.022877] usb 5-2: New USB device found, idVendor=12d1, idProduct=1446 [ 351.022891] usb 5-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 351.022901] usb 5-2: Product: HUAWEI Mobile [ 351.022910] usb 5-2: Manufacturer: HUAWEI Technology [ 351.029905] scsi13 : usb-storage 5-2:1.0 [ 351.030606] scsi14 : usb-storage 5-2:1.1 [ 351.947810] usb 5-2: USB disconnect, device number 6 [ 356.028072] usb 5-2: new high-speed USB device number 7 using ehci-pci [ 356.162710] usb 5-2: New USB device found, idVendor=12d1, idProduct=1436 [ 356.162726] usb 5-2: New USB device strings: Mfr=4, Product=3, SerialNumber=0 [ 356.162737] usb 5-2: Product: HUAWEI Mobile [ 356.162746] usb 5-2: Manufacturer: HUAWEI Technology [ 356.169031] option 5-2:1.0: GSM modem (1-port) converter detected [ 356.169625] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 356.173463] cdc_ether 5-2:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-2, Mobile Broadband Network Device, 02:50:f3:00:00:00 [ 356.174769] option 5-2:1.3: GSM modem (1-port) converter detected [ 356.175157] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 356.175766] option 5-2:1.4: GSM modem (1-port) converter detected [ 356.176211] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB2 [ 356.177182] scsi19 : usb-storage 5-2:1.5 [ 356.179059] scsi20 : usb-storage 5-2:1.6 [ 356.308846] systemd-udevd[4451]: renamed network interface wwan0 to wwp0s29f7u2i1 [ 357.187739] scsi 20:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 357.188781] scsi 19:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 357.198997] sr0: scsi-1 drive [ 357.199320] sd 20:0:0:0: [sdb] Attached SCSI removable disk [ 357.199845] sr 19:0:0:0: Attached scsi CD-ROM sr0 [ 463.768956] usb 5-2: USB disconnect, device number 7 [ 463.770682] option1 ttyUSB0: option_instat_callback: error -108 -- [ 1800.840169] usb 5-2: USB disconnect, device number 10 [ 2429.884252] usb 5-2: new high-speed USB device number 11 using ehci-pci [ 2430.018837] usb 5-2: New USB device found, idVendor=12d1, idProduct=1446 [ 2430.018849] usb 5-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 2430.018858] usb 5-2: Product: HUAWEI Mobile [ 2430.018865] usb 5-2: Manufacturer: HUAWEI Technology [ 2430.025963] scsi23 : usb-storage 5-2:1.0 [ 2430.026605] scsi24 : usb-storage 5-2:1.1 [ 2431.025378] scsi 23:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 2431.026031] scsi 24:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 2431.030133] sr0: scsi-1 drive [ 2431.030691] sr 23:0:0:0: Attached scsi CD-ROM sr0 [ 2431.030937] sd 24:0:0:0: [sdb] Attached SCSI removable disk [ 2431.981239] usb 5-2: USB disconnect, device number 11 [ 2436.144898] usb 5-2: new high-speed USB device number 12 using ehci-pci [ 2436.278861] usb 5-2: New USB device found, idVendor=12d1, idProduct=1436 [ 2436.278876] usb 5-2: New USB device strings: Mfr=4, Product=3, SerialNumber=0 [ 2436.278887] usb 5-2: Product: HUAWEI Mobile [ 2436.278896] usb 5-2: Manufacturer: HUAWEI Technology [ 2436.284102] option 5-2:1.0: GSM modem (1-port) converter detected [ 2436.284657] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 2436.287922] cdc_ether 5-2:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-2, Mobile Broadband Network Device, 02:50:f3:00:00:00 [ 2436.289564] option 5-2:1.3: GSM modem (1-port) converter detected [ 2436.290279] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 2436.291377] option 5-2:1.4: GSM modem (1-port) converter detected [ 2436.292119] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB2 [ 2436.293745] scsi29 : usb-storage 5-2:1.5 [ 2436.295014] scsi30 : usb-storage 5-2:1.6 [ 2436.424735] systemd-udevd[9986]: renamed network interface wwan0 to wwp0s29f7u2i1 [ 2437.293716] scsi 29:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 2437.296928] sr0: scsi-1 drive [ 2437.297651] sr 29:0:0:0: Attached scsi CD-ROM sr0 [ 2437.297720] scsi 30:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 2437.304173] sd 30:0:0:0: [sdb] Attached SCSI removable disk [ 2708.541608] usb 5-2: USB disconnect, device number 12 [ 2708.544147] option1 ttyUSB0: option_instat_callback: error -108 -- [ 2708.561598] option 5-2:1.4: device disconnected [ 2766.132116] usb 5-2: new high-speed USB device number 13 using ehci-pci [ 2766.265476] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01 [ 2766.265489] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2766.265498] usb 5-2: Product: HUAWEI HiLink [ 2766.265506] usb 5-2: Manufacturer: HUAWEI [ 2766.269873] scsi31 : usb-storage 5-2:1.0 [ 2767.293142] usb 5-2: USB disconnect, device number 13 [ 2769.204122] usb 5-2: new high-speed USB device number 14 using ehci-pci [ 2769.337355] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db [ 2769.337370] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2769.337381] usb 5-2: Product: HUAWEI HiLink [ 2769.337390] usb 5-2: Manufacturer: HUAWEI [ 2769.340164] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 [ 2769.468676] systemd-udevd[10780]: renamed network interface eth0 to enp0s29f7u2 [ 3626.815708] usb 5-2: USB disconnect, device number 14 [ 3626.817981] cdc_ether 5-2:1.0 enp0s29f7u2: unregister 'cdc_ether' usb-0000:00:1d.7-2, CDC Ethernet Device [ 3830.440110] usb 5-2: new high-speed USB device number 15 using ehci-pci [ 3830.574771] usb 5-2: New USB device found, idVendor=12d1, idProduct=1446 [ 3830.574786] usb 5-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 3830.574797] usb 5-2: Product: HUAWEI Mobile [ 3830.574806] usb 5-2: Manufacturer: HUAWEI Technology [ 3830.580523] scsi32 : usb-storage 5-2:1.0 [ 3830.581456] scsi33 : usb-storage 5-2:1.1 [ 3831.582357] scsi 33:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 3831.584207] scsi 32:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 3831.586971] sd 33:0:0:0: [sdb] Attached SCSI removable disk [ 3831.587651] sr0: scsi-1 drive [ 3831.588253] sr 32:0:0:0: Attached scsi CD-ROM sr0 [ 3831.996677] usb 5-2: USB disconnect, device number 15 [ 3836.056101] usb 5-2: new high-speed USB device number 16 using ehci-pci [ 3836.190665] usb 5-2: New USB device found, idVendor=12d1, idProduct=1436 [ 3836.190679] usb 5-2: New USB device strings: Mfr=4, Product=3, SerialNumber=0 [ 3836.190688] usb 5-2: Product: HUAWEI Mobile [ 3836.190695] usb 5-2: Manufacturer: HUAWEI Technology [ 3836.195075] option 5-2:1.0: GSM modem (1-port) converter detected [ 3836.195591] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 3836.199054] cdc_ether 5-2:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-2, Mobile Broadband Network Device, 02:50:f3:00:00:00 [ 3836.200709] option 5-2:1.3: GSM modem (1-port) converter detected [ 3836.201062] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 3836.201988] option 5-2:1.4: GSM modem (1-port) converter detected [ 3836.202402] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB2 [ 3836.203219] scsi38 : usb-storage 5-2:1.5 [ 3836.205022] scsi39 : usb-storage 5-2:1.6 [ 3836.428601] systemd-udevd[14173]: renamed network interface wwan0 to wwp0s29f7u2i1 [ 3837.201832] scsi 38:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 3837.204657] sr0: scsi-1 drive [ 3837.205334] sr 38:0:0:0: Attached scsi CD-ROM sr0 [ 3837.209026] scsi 39:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 3837.216476] sd 39:0:0:0: [sdb] Attached SCSI removable disk [ 4147.125843] usb 5-2: USB disconnect, device number 16 [ 4147.128138] option1 ttyUSB0: option_instat_callback: error -108 -- [ 4147.157516] option 5-2:1.4: device disconnected [ 4197.592094] usb 5-2: new high-speed USB device number 17 using ehci-pci [ 4197.729667] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01 [ 4197.729687] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 4197.729703] usb 5-2: Product: HUAWEI HiLink [ 4197.729716] usb 5-2: Manufacturer: HUAWEI [ 4197.740222] scsi40 : usb-storage 5-2:1.0 [ 4198.741291] scsi 40:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4198.746817] sr0: scsi-1 drive [ 4198.749449] sr 40:0:0:0: Attached scsi CD-ROM sr0 [ 4199.092574] usb 5-2: USB disconnect, device number 17 [ 4200.664103] usb 5-2: new high-speed USB device number 18 using ehci-pci [ 4200.797274] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db [ 4200.797288] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 4200.797299] usb 5-2: Product: HUAWEI HiLink [ 4200.797309] usb 5-2: Manufacturer: HUAWEI [ 4200.801068] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 [ 4200.932437] systemd-udevd[16754]: renamed network interface eth0 to enp0s29f7u2 [ 5205.146667] usb 5-2: USB disconnect, device number 18 [ 5205.148080] cdc_ether 5-2:1.0 enp0s29f7u2: unregister 'cdc_ether' usb-0000:00:1d.7-2, CDC Ethernet Device [ 5493.564105] usb 5-2: new high-speed USB device number 19 using ehci-pci [ 5493.697317] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01 [ 5493.697332] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 5493.697343] usb 5-2: Product: HUAWEI HiLink [ 5493.697352] usb 5-2: Manufacturer: HUAWEI [ 5493.699776] scsi41 : usb-storage 5-2:1.0 [ 5494.701011] scsi 41:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 5494.703722] sr0: scsi-1 drive [ 5494.704183] sr 41:0:0:0: Attached scsi CD-ROM sr0 [ 5494.891927] Buffer I/O error on device sr0, logical block 9 [ 5494.891945] Buffer I/O error on device sr0, logical block 9 [ 5494.892489] Buffer I/O error on device sr0, logical block 0 [ 5494.892507] Buffer I/O error on device sr0, logical block 0 [ 5494.892536] Buffer I/O error on device sr0, logical block 2 [ 5494.892551] Buffer I/O error on device sr0, logical block 2 [ 5494.892572] Buffer I/O error on device sr0, logical block 0 [ 5494.892593] Buffer I/O error on device sr0, logical block 0 [ 5494.892620] Buffer I/O error on device sr0, logical block 0 [ 5494.892646] Buffer I/O error on device sr0, logical block 1 [ 5495.043725] usb 5-2: USB disconnect, device number 19 [ 5496.636107] usb 5-2: new high-speed USB device number 20 using ehci-pci [ 5496.769726] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db [ 5496.769740] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 5496.769749] usb 5-2: Product: HUAWEI HiLink [ 5496.769757] usb 5-2: Manufacturer: HUAWEI [ 5496.772618] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 [ 5496.966910] systemd-udevd[23454]: renamed network interface eth0 to enp0s29f7u2 [ 6300.944149] usb 1-1: new low-speed USB device number 3 using uhci_hcd [ 6301.118245] usb 1-1: New USB device found, idVendor=093a, idProduct=2510 [ 6301.118261] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6301.118271] usb 1-1: Product: USB OPTICAL MOUSE [ 6301.118280] usb 1-1: Manufacturer: PIXART [ 6302.657792] usbcore: registered new interface driver usbhid [ 6302.657801] usbhid: USB HID core driver [ 6302.810313] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input10 [ 6302.813027] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0 [ 6784.808057] usb 5-2: USB disconnect, device number 20 [ 6784.811594] cdc_ether 5-2:1.0 enp0s29f7u2: unregister 'cdc_ether' usb-0000:00:1d.7-2, CDC Ethernet Device [ 6892.456107] usb 5-2: new high-speed USB device number 22 using ehci-pci [ 6892.589068] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01 [ 6892.589083] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 6892.589094] usb 5-2: Product: HUAWEI HiLink [ 6892.589103] usb 5-2: Manufacturer: HUAWEI [ 6892.595459] scsi42 : usb-storage 5-2:1.0 [ 6893.593004] scsi 42:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 6893.595014] sr0: scsi-1 drive [ 6893.595611] sr 42:0:0:0: Attached scsi CD-ROM sr0 [ 6893.769782] quiet_error: 2 callbacks suppressed [ 6893.769794] Buffer I/O error on device sr0, logical block 2 [ 6893.769808] Buffer I/O error on device sr0, logical block 2 [ 6893.769855] Buffer I/O error on device sr0, logical block 0 [ 6893.769869] Buffer I/O error on device sr0, logical block 0 [ 6893.769891] Buffer I/O error on device sr0, logical block 0 [ 6893.769919] Buffer I/O error on device sr0, logical block 0 [ 6893.769946] Buffer I/O error on device sr0, logical block 1 [ 6893.769970] Buffer I/O error on device sr0, logical block 1 [ 6893.770000] Buffer I/O error on device sr0, logical block 512 [ 6893.922627] usb 5-2: USB disconnect, device number 22 [ 6895.504123] usb 5-2: new high-speed USB device number 23 using ehci-pci [ 6895.637316] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db [ 6895.637331] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 6895.637342] usb 5-2: Product: HUAWEI HiLink [ 6895.637352] usb 5-2: Manufacturer: HUAWEI [ 6895.640096] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 [ 6895.668882] systemd-udevd[27229]: renamed network interface eth0 to enp0s29f7u2 [ 7079.800282] ata1.00: configured for UDMA/133 [ 7079.800300] ata1: EH complete [ 7080.593328] EXT4-fs (sda2): re-mounted. Opts: commit=0 [ 7080.905242] EXT4-fs (sda3): re-mounted. Opts: commit=0 [ 7082.002184] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 7082.002199] PM: Basic memory bitmaps created [ 7082.002204] PM: Syncing filesystems ... done. [ 7082.191361] Freezing user space processes ... (elapsed 0.03 seconds) done. [ 7082.224299] PM: Preallocating image memory... done (allocated 154626 pages) [ 7082.712569] PM: Allocated 618504 kbytes in 0.48 seconds (1288.55 MB/s) [ 7082.712575] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 7082.728820] Suspending console(s) (use no_console_suspend to debug) [ 7083.052144] PM: freeze of devices complete after 323.189 msecs [ 7083.052559] PM: late freeze of devices complete after 0.407 msecs [ 7083.053390] PM: noirq freeze of devices complete after 0.822 msecs -- [ 7092.554896] EXT4-fs (sda3): re-mounted. Opts: commit=600 [ 7296.460162] usb 5-2: new high-speed USB device number 24 using ehci-pci [ 7296.593177] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01 [ 7296.593187] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 7296.593194] usb 5-2: Product: HUAWEI HiLink [ 7296.593199] usb 5-2: Manufacturer: HUAWEI [ 7296.595247] scsi43 : usb-storage 5-2:1.0 [ 7297.592960] scsi 43:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 7297.594552] sr0: scsi-1 drive [ 7297.594931] sr 43:0:0:0: Attached scsi CD-ROM sr0 [ 7300.837248] usb 5-2: USB disconnect, device number 24 [ 7301.144149] usb 5-2: new high-speed USB device number 25 using ehci-pci [ 7301.277174] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db [ 7301.277189] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 7301.277200] usb 5-2: Product: HUAWEI HiLink [ 7301.277209] usb 5-2: Manufacturer: HUAWEI [ 7301.280830] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 [ 7301.396816] systemd-udevd[29673]: renamed network interface eth0 to enp0s29f7u2 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 15:08 ` Chernetsky Andrey @ 2013-08-12 17:06 ` Vasiliy D.Sevostyanov , 2013-08-12 17:27 ` Chernetsky Andrey 2013-08-12 17:48 ` Chernetsky Andrey 0 siblings, 2 replies; 17+ messages in thread From: Vasiliy D.Sevostyanov , @ 2013-08-12 17:06 UTC (permalink / raw) To: ALT Linux Community general discussions Hi, Chernetsky Andrey, you wrote 18:08 Mon 12 Aug : Нашел похожий модем. http://sysadmins.ws/viewtopic.php?f=52&t=1619 Обратите внимание на 70-persistent-net.rules в тексте. Может, создать, только вместо eth* написать ppp* ? > > И проверьте пакет udev ( `rpm -V udev udev-extras udev-hwdb udev-rules udev_static-addon libudev1` ) -- > > здесь мои пакеты, у Вас список может быть немного другой. > andy@mycomp ~ $ rpm -qa |grep udev > python-module-pyudev-0.14-alt1 > udev-201-alt1.M70P.1 > libudev1-201-alt1.M70P.1 > udev_static-addon-0.2-alt6 > udev-hwdb-201-alt1.M70P.1 > system-config-printer-udev-1.3.13-alt2 > udev-extras-201-alt1.M70P.1 > udev-rule-generator-cdrom-201-alt1.M70P.1 > udev-rules-201-alt1.M70P.1 > libgudev-201-alt1.M70P.1 Проверьте командой `rpm -V python-module-pyudev udev libudev1 udev_static-addon udev-hwdb system-config-printer-udev udev-extras udev-rule-generator-cdrom udev-rules libgudev` (специально скомпилировал под Ваш случай) нет ли битых пакетов (не должно быть строк с названиями файлов, просто пустой вывод). > > > > > [ 153.646631] usb 5-8: New USB device found, idVendor=12d1, idProduct=1436 > [ 153.800801] cdc_ether 5-8:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-8, Mobile Broadband Network Device, 02:50:f3:00:00:00 > [ 153.800908] usbcore: registered new interface driver cdc_ether > [ 153.846091] systemd-udevd[3485]: renamed network interface wwan0 to wwp0s29f7u8i1 С этим все путем (12d1:1436) > [ 356.162710] usb 5-2: New USB device found, idVendor=12d1, idProduct=1436 > [ 463.768956] usb 5-2: USB disconnect, device number 7 > [ 463.770682] option1 ttyUSB0: option_instat_callback: error -108 Появляется ошибка, вначале не было > [ 2769.337355] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db Новый (12d1:14db) > [ 2769.337370] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > [ 2769.337381] usb 5-2: Product: HUAWEI HiLink > [ 2769.337390] usb 5-2: Manufacturer: HUAWEI > [ 2769.340164] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 > [ 2769.468676] systemd-udevd[10780]: renamed network interface eth0 to enp0s29f7u2 Появляется eth0 (!!!) > [ 3626.815708] usb 5-2: USB disconnect, device number 14 > [ 3626.817981] cdc_ether 5-2:1.0 enp0s29f7u2: unregister 'cdc_ether' usb-0000:00:1d.7-2, CDC Ethernet Device После гибернации опять > [ 7296.593177] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01 > [ 7296.593187] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > [ 7296.593194] usb 5-2: Product: HUAWEI HiLink > [ 7296.593199] usb 5-2: Manufacturer: HUAWEI > [ 7296.595247] scsi43 : usb-storage 5-2:1.0 > [ 7297.592960] scsi 43:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 > [ 7297.594552] sr0: scsi-1 drive > [ 7297.594931] sr 43:0:0:0: Attached scsi CD-ROM sr0 > [ 7300.837248] usb 5-2: USB disconnect, device number 24 > [ 7301.144149] usb 5-2: new high-speed USB device number 25 using ehci-pci > [ 7301.277174] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db > [ 7301.277189] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > [ 7301.277200] usb 5-2: Product: HUAWEI HiLink > [ 7301.277209] usb 5-2: Manufacturer: HUAWEI > [ 7301.280830] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 > [ 7301.396816] systemd-udevd[29673]: renamed network interface eth0 to enp0s29f7u2 Поиск сочетания 14db дал только /usr/share/usb_modeswitch/12d1:1f01 : # Huawei E353 (3.se) TargetVendor= 0x12d1 TargetProduct= 0x14db MessageContent="55534243123456780000000000000a11062000000000000100000000000000" NoDriverLoading=1 В гугле нашел похожий, там еще есть строки DefaultVendor= 12d1 DefaultProduct= 1f01 -- С уважением, Василий Д. Севостьянов. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 17:06 ` Vasiliy D.Sevostyanov , @ 2013-08-12 17:27 ` Chernetsky Andrey 2013-08-12 18:07 ` Vasiliy D.Sevostyanov 2013-08-12 17:48 ` Chernetsky Andrey 1 sibling, 1 reply; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-12 17:27 UTC (permalink / raw) To: community Vasiliy D.Sevostyanov , wrote: > Hi, Chernetsky Andrey, you wrote 18:08 Mon 12 Aug : > Нашел похожий модем. http://sysadmins.ws/viewtopic.php?f=52&t=1619 > Обратите внимание на 70-persistent-net.rules в тексте. Может, создать, только вместо eth* написать ppp* ? > > > > И проверьте пакет udev ( `rpm -V udev udev-extras udev-hwdb udev-rules udev_static-addon libudev1` ) -- > > > здесь мои пакеты, у Вас список может быть немного другой. > > andy@mycomp ~ $ rpm -qa |grep udev > > python-module-pyudev-0.14-alt1 > > udev-201-alt1.M70P.1 > > libudev1-201-alt1.M70P.1 > > udev_static-addon-0.2-alt6 > > udev-hwdb-201-alt1.M70P.1 > > system-config-printer-udev-1.3.13-alt2 > > udev-extras-201-alt1.M70P.1 > > udev-rule-generator-cdrom-201-alt1.M70P.1 > > udev-rules-201-alt1.M70P.1 > > libgudev-201-alt1.M70P.1 > Проверьте командой > `rpm -V python-module-pyudev udev libudev1 udev_static-addon udev-hwdb system-config-printer-udev udev-extras udev-rule-generator-cdrom udev-rules libgudev` > (специально скомпилировал под Ваш случай) нет ли битых пакетов (не должно быть строк с названиями файлов, просто пустой вывод). andy@mycomp ~ $ rpm -V python-module-pyudev udev libudev1 udev_static-addon udev-hwdb system-config-printer-udev udev-extras udev-rule-generator-cdrom udev-rules libgudev .M...... g /etc/udev/hwdb.bin ndy@mycomp ~ $ ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 17:27 ` Chernetsky Andrey @ 2013-08-12 18:07 ` Vasiliy D.Sevostyanov 0 siblings, 0 replies; 17+ messages in thread From: Vasiliy D.Sevostyanov @ 2013-08-12 18:07 UTC (permalink / raw) To: ALT Linux Community general discussions Hi, Chernetsky Andrey, you wrote 20:27 Mon 12 Aug : > Vasiliy D.Sevostyanov , wrote: > > Hi, Chernetsky Andrey, you wrote 18:08 Mon 12 Aug : > > Нашел похожий модем. http://sysadmins.ws/viewtopic.php?f=52&t=1619 > > Обратите внимание на 70-persistent-net.rules в тексте. Может, создать, только вместо eth* написать ppp* ? > > > andy@mycomp ~ $ rpm -V python-module-pyudev udev libudev1 udev_static-addon udev-hwdb > system-config-printer-udev udev-extras udev-rule-generator-cdrom udev-rules libgudev > .M...... g /etc/udev/hwdb.bin Права доступа ушли, ну у меня так же почему-то. Считаем, что тут норма. А если создать соединение вручную, через eth0, используя pppd? Работает? -- С уважением, Василий Д. Севостьянов. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 17:06 ` Vasiliy D.Sevostyanov , 2013-08-12 17:27 ` Chernetsky Andrey @ 2013-08-12 17:48 ` Chernetsky Andrey 2013-08-12 18:28 ` Vasiliy D.Sevostyanov , 1 sibling, 1 reply; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-12 17:48 UTC (permalink / raw) To: community Vasiliy D.Sevostyanov , wrote: > Hi, Chernetsky Andrey, you wrote 18:08 Mon 12 Aug : > Нашел похожий модем. http://sysadmins.ws/viewtopic.php?f=52&t=1619 > Обратите внимание на 70-persistent-net.rules в тексте. Может, создать, только вместо eth* написать ppp* ? > > > > И проверьте пакет udev ( `rpm -V udev udev-extras udev-hwdb udev-rules udev_static-addon libudev1` ) -- > > > здесь мои пакеты, у Вас список может быть немного другой. > > andy@mycomp ~ $ rpm -qa |grep udev > > python-module-pyudev-0.14-alt1 > > udev-201-alt1.M70P.1 > > libudev1-201-alt1.M70P.1 > > udev_static-addon-0.2-alt6 > > udev-hwdb-201-alt1.M70P.1 > > system-config-printer-udev-1.3.13-alt2 > > udev-extras-201-alt1.M70P.1 > > udev-rule-generator-cdrom-201-alt1.M70P.1 > > udev-rules-201-alt1.M70P.1 > > libgudev-201-alt1.M70P.1 > Проверьте командой > `rpm -V python-module-pyudev udev libudev1 udev_static-addon udev-hwdb system-config-printer-udev udev-extras udev-rule-generator-cdrom udev-rules libgudev` > (специально скомпилировал под Ваш случай) нет ли битых пакетов (не должно быть строк с названиями файлов, просто пустой вывод). > > > > > > > > > > > [ 153.646631] usb 5-8: New USB device found, idVendor=12d1, idProduct=1436 > > [ 153.800801] cdc_ether 5-8:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-8, Mobile Broadband Network Device, 02:50:f3:00:00:00 > > [ 153.800908] usbcore: registered new interface driver cdc_ether > > [ 153.846091] systemd-udevd[3485]: renamed network interface wwan0 to wwp0s29f7u8i1 > С этим все путем (12d1:1436) > > > [ 356.162710] usb 5-2: New USB device found, idVendor=12d1, idProduct=1436 > > [ 463.768956] usb 5-2: USB disconnect, device number 7 > > [ 463.770682] option1 ttyUSB0: option_instat_callback: error -108 > Появляется ошибка, вначале не было > > > [ 2769.337355] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db > Новый (12d1:14db) > > [ 2769.337370] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > > [ 2769.337381] usb 5-2: Product: HUAWEI HiLink > > [ 2769.337390] usb 5-2: Manufacturer: HUAWEI > > [ 2769.340164] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 > > [ 2769.468676] systemd-udevd[10780]: renamed network interface eth0 to enp0s29f7u2 > Появляется eth0 (!!!) > > [ 3626.815708] usb 5-2: USB disconnect, device number 14 > > [ 3626.817981] cdc_ether 5-2:1.0 enp0s29f7u2: unregister 'cdc_ether' usb-0000:00:1d.7-2, CDC Ethernet Device > > После гибернации опять > > [ 7296.593177] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01 > > [ 7296.593187] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > > [ 7296.593194] usb 5-2: Product: HUAWEI HiLink > > [ 7296.593199] usb 5-2: Manufacturer: HUAWEI > > [ 7296.595247] scsi43 : usb-storage 5-2:1.0 > > [ 7297.592960] scsi 43:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 > > [ 7297.594552] sr0: scsi-1 drive > > [ 7297.594931] sr 43:0:0:0: Attached scsi CD-ROM sr0 > > [ 7300.837248] usb 5-2: USB disconnect, device number 24 > > [ 7301.144149] usb 5-2: new high-speed USB device number 25 using ehci-pci > > [ 7301.277174] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db > > [ 7301.277189] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > > [ 7301.277200] usb 5-2: Product: HUAWEI HiLink > > [ 7301.277209] usb 5-2: Manufacturer: HUAWEI > > [ 7301.280830] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 > > [ 7301.396816] systemd-udevd[29673]: renamed network interface eth0 to enp0s29f7u2 Я боюсь ввел вас в заблуждение, дело в том что я и другой модем пробовал, Huawai E 173 и он тоже попал в вывод команды. Перезагрузился и вот новый вывод только с E303: andy@mycomp ~ $ dmesg| grep -A 20 -B 2 -i 12d1 [ 68.147126] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 142.172130] usb 1-2: new high-speed USB device number 5 using ehci-pci [ 142.305190] usb 1-2: New USB device found, idVendor=12d1, idProduct=1f01 [ 142.305210] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 142.305225] usb 1-2: Product: HUAWEI HiLink [ 142.305238] usb 1-2: Manufacturer: HUAWEI [ 142.506850] Initializing USB Mass Storage driver... [ 142.507639] scsi4 : usb-storage 1-2:1.0 [ 142.507923] usbcore: registered new interface driver usb-storage [ 142.507930] USB Mass Storage support registered. [ 143.508248] usb 1-2: USB disconnect, device number 5 [ 145.220131] usb 1-2: new high-speed USB device number 6 using ehci-pci [ 145.353180] usb 1-2: New USB device found, idVendor=12d1, idProduct=14db [ 145.353196] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 145.353206] usb 1-2: Product: HUAWEI HiLink [ 145.353215] usb 1-2: Manufacturer: HUAWEI [ 145.466108] cdc_ether 1-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63 [ 145.466214] usbcore: registered new interface driver cdc_ether [ 145.482064] systemd-udevd[3456]: renamed network interface eth0 to enp0s29f7u2 > > > Поиск сочетания 14db дал только /usr/share/usb_modeswitch/12d1:1f01 : > # Huawei E353 (3.se) > > TargetVendor= 0x12d1 > TargetProduct= 0x14db > > MessageContent="55534243123456780000000000000a11062000000000000100000000000000" > NoDriverLoading=1 > > В гугле нашел похожий, там еще есть строки > DefaultVendor= 12d1 > DefaultProduct= 1f01 > > -- > С уважением, Василий Д. Севостьянов. > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением, Андрей! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 17:48 ` Chernetsky Andrey @ 2013-08-12 18:28 ` Vasiliy D.Sevostyanov , 2013-08-12 19:12 ` Chernetsky Andrey 0 siblings, 1 reply; 17+ messages in thread From: Vasiliy D.Sevostyanov , @ 2013-08-12 18:28 UTC (permalink / raw) To: ALT Linux Community general discussions Hi, Chernetsky Andrey, you wrote 20:48 Mon 12 Aug : > Vasiliy D.Sevostyanov , wrote: > > Hi, Chernetsky Andrey, you wrote 18:08 Mon 12 Aug : > > Нашел похожий модем. http://sysadmins.ws/viewtopic.php?f=52&t=1619 > > Обратите внимание на 70-persistent-net.rules в тексте. Может, создать, только вместо eth* написать ppp* ? > > > Я боюсь ввел вас в заблуждение, дело в том что я и другой модем пробовал, Huawai E 173 и он тоже попал в вывод команды. Перезагрузился и вот новый вывод только с > E303: Нормально, у меня тоже он, и знакомое 12d1:1436 сразу бросилось в глаза ;)) Нашел http://linuxforum.ru/viewtopic.php?pid=316639#p316639 ещё, там ниже по треду у модема появилось четыре (!) порта вместо трех. Попробуйте отключить его внутренний софт командой AT^U2DIAG=0 (minicom/cutecom в альте присутствует). -- С уважением, Василий Д. Севостьянов. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 18:28 ` Vasiliy D.Sevostyanov , @ 2013-08-12 19:12 ` Chernetsky Andrey 2013-08-12 19:22 ` Vasiliy D.Sevostyanov 0 siblings, 1 reply; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-12 19:12 UTC (permalink / raw) To: community Vasiliy D.Sevostyanov , wrote: > Hi, Chernetsky Andrey, you wrote 20:48 Mon 12 Aug : > > Vasiliy D.Sevostyanov , wrote: > > > Hi, Chernetsky Andrey, you wrote 18:08 Mon 12 Aug : > > > Нашел похожий модем. http://sysadmins.ws/viewtopic.php?f=52&t=1619 > > > Обратите внимание на 70-persistent-net.rules в тексте. Может, создать, только вместо eth* написать ppp* ? > > > > > > Я боюсь ввел вас в заблуждение, дело в том что я и другой модем пробовал, Huawai E 173 и он тоже попал в вывод команды. Перезагрузился и вот новый вывод только с > > E303: > Нормально, у меня тоже он, и знакомое 12d1:1436 сразу бросилось в глаза ;)) > > Нашел http://linuxforum.ru/viewtopic.php?pid=316639#p316639 ещё, там ниже по треду у модема появилось четыре (!) порта вместо трех. Попробуйте отключить его внутренний софт командой AT^U2DIAG=0 (minicom/cutecom в альте присутствует). > Спасибо! Разобрался работает. -- С уважением, Андрей! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 19:12 ` Chernetsky Andrey @ 2013-08-12 19:22 ` Vasiliy D.Sevostyanov 2013-08-13 5:24 ` Chernetsky Andrey 2013-08-13 7:03 ` Chernetsky Andrey 0 siblings, 2 replies; 17+ messages in thread From: Vasiliy D.Sevostyanov @ 2013-08-12 19:22 UTC (permalink / raw) To: ALT Linux Community general discussions Hi, Chernetsky Andrey, you wrote 22:12 Mon 12 Aug : > Спасибо! Разобрался работает. Если не очень тяжело, черкните итоговое письмо: что делали, что в итоге. Для будущих поколений ;) -- С уважением, Василий Д. Севостьянов. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 19:22 ` Vasiliy D.Sevostyanov @ 2013-08-13 5:24 ` Chernetsky Andrey 2013-08-13 7:03 ` Chernetsky Andrey 1 sibling, 0 replies; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-13 5:24 UTC (permalink / raw) To: community Vasiliy D.Sevostyanov wrote: > Hi, Chernetsky Andrey, you wrote 22:12 Mon 12 Aug : > > Спасибо! Разобрался работает. > Если не очень тяжело, черкните итоговое письмо: > что делали, > что в итоге. > > Для будущих поколений ;) Сейчас уезжаю в командировку, как появится время черкану -- С уважением, Андрей! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 19:22 ` Vasiliy D.Sevostyanov 2013-08-13 5:24 ` Chernetsky Andrey @ 2013-08-13 7:03 ` Chernetsky Andrey 1 sibling, 0 replies; 17+ messages in thread From: Chernetsky Andrey @ 2013-08-13 7:03 UTC (permalink / raw) To: community Vasiliy D.Sevostyanov wrote: > Hi, Chernetsky Andrey, you wrote 22:12 Mon 12 Aug : > > Спасибо! Разобрался работает. > Если не очень тяжело, черкните итоговое письмо: > что делали, > что в итоге. > > Для будущих поколений ;) > Блин, вот только что нашел в чем была основная проблема и не нужно было в дебри лезть. У меня ModemManager.service не был запущен, хотя сам пакет стоял. sudo systemctl enable ModemManager и все стало на свои места. Меня сбило с толку, что некоторые usb-модемы все равно работали и без данного сервиса. -- С уважением, Андрей! ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Comm] USB modem в p7 2013-08-12 12:33 [Comm] USB modem в p7 Chernetsky Andrey 2013-08-12 12:52 ` Andrii Dobrovol`s`kii 2013-08-12 13:20 ` Vasiliy D.Sevostyanov , @ 2013-08-13 16:24 ` Sergey Vlasov 2 siblings, 0 replies; 17+ messages in thread From: Sergey Vlasov @ 2013-08-13 16:24 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 1263 bytes --] On Mon, Aug 12, 2013 at 03:33:24PM +0300, Chernetsky Andrey wrote: > Система KDesktop 7.0, попробовал подключится к Интернету через usb модем Huawei E303, > подключается нормально, но почему то NM его видит не как usb modem, а как сетевую > карту, пишет: проводное сетевое соединение "Автоматическое (Ethernet) установлено. > В Центре управления системы, также как сетевая карта с интерфейсом enp0s29f7u2. > С телефоном GT-S6102, при его использовании как модем, аналогично. В случае с телефоном на Android эта ситуация вполне нормальная - все настройки сотовой сети задаются средствами самого телефона, а для компьютера по USB доступен только сетевой интерфейс RNDIS (при этом на телефоне запускается DHCP-сервер, поэтому со стороны компьютера обычно не требуется никаких дополнительных настроек). Кстати, внешним интерфейсом в данном случае может быть и Wi-Fi. Для модемов действительно требуется работающий ModemManager, поскольку даже в случае, если у модема есть интерфейс RNDIS (позволяющий достить большей производительности, чем PPP через ttyUSB*), этот сетевой интерфейс не будет работать без указания необходимых настроек через другие интерфейсы (с помощью AT-команд или других протоколов, специфичных для конкретных устройств). [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 198 bytes --] ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2013-08-13 16:24 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-08-12 12:33 [Comm] USB modem в p7 Chernetsky Andrey 2013-08-12 12:52 ` Andrii Dobrovol`s`kii 2013-08-12 15:15 ` Chernetsky Andrey 2013-08-12 15:15 ` Anton Gorlov 2013-08-12 15:26 ` Chernetsky Andrey 2013-08-12 13:20 ` Vasiliy D.Sevostyanov , 2013-08-12 15:08 ` Chernetsky Andrey 2013-08-12 17:06 ` Vasiliy D.Sevostyanov , 2013-08-12 17:27 ` Chernetsky Andrey 2013-08-12 18:07 ` Vasiliy D.Sevostyanov 2013-08-12 17:48 ` Chernetsky Andrey 2013-08-12 18:28 ` Vasiliy D.Sevostyanov , 2013-08-12 19:12 ` Chernetsky Andrey 2013-08-12 19:22 ` Vasiliy D.Sevostyanov 2013-08-13 5:24 ` Chernetsky Andrey 2013-08-13 7:03 ` Chernetsky Andrey 2013-08-13 16:24 ` Sergey Vlasov
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git