ALT Linux Community general discussions
 help / color / mirror / Atom feed
From: Chernetsky Andrey <andy_ch@open.by>
To: community@lists.altlinux.org
Subject: Re: [Comm] USB modem в p7
Date: Mon, 12 Aug 2013 20:48:53 +0300
Message-ID: <20130812174853.GB22579@mycomp.localdomain> (raw)
In-Reply-To: <20130812170637.GA26613@comp-e-450-apu-a1bd44.localdomain>

Vasiliy D.Sevostyanov , wrote:
> Hi, Chernetsky Andrey, you wrote 18:08 Mon 12 Aug :
> Нашел похожий модем. http://sysadmins.ws/viewtopic.php?f=52&t=1619
> Обратите внимание на 70-persistent-net.rules в тексте. Может, создать, только вместо eth* написать ppp* ?
> 
> > > И проверьте пакет udev ( `rpm -V udev udev-extras udev-hwdb udev-rules udev_static-addon libudev1` ) -- 
> > > здесь мои пакеты, у Вас список может быть немного другой.
> > andy@mycomp ~ $ rpm -qa |grep udev
> > python-module-pyudev-0.14-alt1
> > udev-201-alt1.M70P.1
> > libudev1-201-alt1.M70P.1
> > udev_static-addon-0.2-alt6
> > udev-hwdb-201-alt1.M70P.1
> > system-config-printer-udev-1.3.13-alt2
> > udev-extras-201-alt1.M70P.1
> > udev-rule-generator-cdrom-201-alt1.M70P.1
> > udev-rules-201-alt1.M70P.1
> > libgudev-201-alt1.M70P.1
> Проверьте командой
> `rpm -V python-module-pyudev udev libudev1 udev_static-addon udev-hwdb system-config-printer-udev udev-extras udev-rule-generator-cdrom udev-rules libgudev`
> (специально скомпилировал под Ваш случай) нет ли битых пакетов (не должно быть строк с названиями файлов, просто пустой вывод).
> > 
> > 
> > 
> > 
> 
> > [  153.646631] usb 5-8: New USB device found, idVendor=12d1, idProduct=1436
> > [  153.800801] cdc_ether 5-8:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-8, Mobile Broadband Network Device, 02:50:f3:00:00:00
> > [  153.800908] usbcore: registered new interface driver cdc_ether
> > [  153.846091] systemd-udevd[3485]: renamed network interface wwan0 to wwp0s29f7u8i1
> С этим все путем (12d1:1436)
> 
> > [  356.162710] usb 5-2: New USB device found, idVendor=12d1, idProduct=1436
> > [  463.768956] usb 5-2: USB disconnect, device number 7
> > [  463.770682] option1 ttyUSB0: option_instat_callback: error -108
> Появляется ошибка, вначале не было
> 
> > [ 2769.337355] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db
> Новый (12d1:14db)
> > [ 2769.337370] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> > [ 2769.337381] usb 5-2: Product: HUAWEI HiLink
> > [ 2769.337390] usb 5-2: Manufacturer: HUAWEI
> > [ 2769.340164] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63
> > [ 2769.468676] systemd-udevd[10780]: renamed network interface eth0 to enp0s29f7u2
> Появляется eth0 (!!!)
> > [ 3626.815708] usb 5-2: USB disconnect, device number 14
> > [ 3626.817981] cdc_ether 5-2:1.0 enp0s29f7u2: unregister 'cdc_ether' usb-0000:00:1d.7-2, CDC Ethernet Device
> 
> После гибернации опять 
> > [ 7296.593177] usb 5-2: New USB device found, idVendor=12d1, idProduct=1f01
> > [ 7296.593187] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> > [ 7296.593194] usb 5-2: Product: HUAWEI HiLink
> > [ 7296.593199] usb 5-2: Manufacturer: HUAWEI
> > [ 7296.595247] scsi43 : usb-storage 5-2:1.0
> > [ 7297.592960] scsi 43:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
> > [ 7297.594552] sr0: scsi-1 drive
> > [ 7297.594931] sr 43:0:0:0: Attached scsi CD-ROM sr0
> > [ 7300.837248] usb 5-2: USB disconnect, device number 24
> > [ 7301.144149] usb 5-2: new high-speed USB device number 25 using ehci-pci
> > [ 7301.277174] usb 5-2: New USB device found, idVendor=12d1, idProduct=14db
> > [ 7301.277189] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
> > [ 7301.277200] usb 5-2: Product: HUAWEI HiLink
> > [ 7301.277209] usb 5-2: Manufacturer: HUAWEI
> > [ 7301.280830] cdc_ether 5-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 58:2c:80:13:92:63
> > [ 7301.396816] systemd-udevd[29673]: renamed network interface eth0 to enp0s29f7u2
Я боюсь ввел вас в заблуждение, дело в том что я и другой модем пробовал, Huawai E 173 и он тоже попал в вывод команды. Перезагрузился и вот новый вывод только с 
E303:
andy@mycomp ~ $ dmesg| grep -A 20 -B 2 -i 12d1
[   68.147126] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  142.172130] usb 1-2: new high-speed USB device number 5 using ehci-pci
[  142.305190] usb 1-2: New USB device found, idVendor=12d1, idProduct=1f01
[  142.305210] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  142.305225] usb 1-2: Product: HUAWEI HiLink
[  142.305238] usb 1-2: Manufacturer: HUAWEI
[  142.506850] Initializing USB Mass Storage driver...
[  142.507639] scsi4 : usb-storage 1-2:1.0
[  142.507923] usbcore: registered new interface driver usb-storage
[  142.507930] USB Mass Storage support registered.
[  143.508248] usb 1-2: USB disconnect, device number 5
[  145.220131] usb 1-2: new high-speed USB device number 6 using ehci-pci
[  145.353180] usb 1-2: New USB device found, idVendor=12d1, idProduct=14db
[  145.353196] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[  145.353206] usb 1-2: Product: HUAWEI HiLink
[  145.353215] usb 1-2: Manufacturer: HUAWEI
[  145.466108] cdc_ether 1-2:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-2,
CDC Ethernet Device, 58:2c:80:13:92:63
[  145.466214] usbcore: registered new interface driver cdc_ether
[  145.482064] systemd-udevd[3456]: renamed network interface eth0 to enp0s29f7u2
> 
> 
> Поиск сочетания 14db дал только /usr/share/usb_modeswitch/12d1:1f01 :
> # Huawei E353 (3.se)
> 
> TargetVendor=  0x12d1
> TargetProduct= 0x14db
> 
> MessageContent="55534243123456780000000000000a11062000000000000100000000000000"
> NoDriverLoading=1
> 
> В гугле нашел похожий, там еще есть строки 
> DefaultVendor= 12d1
> DefaultProduct= 1f01
> 
> -- 
> С уважением, Василий Д. Севостьянов.
> _______________________________________________
> community mailing list
> community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community

-- 
С уважением,
Андрей!






  parent reply	other threads:[~2013-08-12 17:48 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-12 12:33 Chernetsky Andrey
2013-08-12 12:52 ` Andrii Dobrovol`s`kii
2013-08-12 15:15   ` Chernetsky Andrey
2013-08-12 15:15     ` Anton Gorlov
2013-08-12 15:26       ` Chernetsky Andrey
2013-08-12 13:20 ` Vasiliy D.Sevostyanov ,
2013-08-12 15:08   ` Chernetsky Andrey
2013-08-12 17:06     ` Vasiliy D.Sevostyanov ,
2013-08-12 17:27       ` Chernetsky Andrey
2013-08-12 18:07         ` Vasiliy D.Sevostyanov
2013-08-12 17:48       ` Chernetsky Andrey [this message]
2013-08-12 18:28         ` Vasiliy D.Sevostyanov ,
2013-08-12 19:12           ` Chernetsky Andrey
2013-08-12 19:22             ` Vasiliy D.Sevostyanov
2013-08-13  5:24               ` Chernetsky Andrey
2013-08-13  7:03               ` Chernetsky Andrey
2013-08-13 16:24 ` Sergey Vlasov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130812174853.GB22579@mycomp.localdomain \
    --to=andy_ch@open.by \
    --cc=community@lists.altlinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git