andy@mycomp ~ $ sudo sensors-detect # sensors-detect revision 6031 (2012-03-07 17:14:01 +0100) # System: MICRO-STAR INTERNATIONAL CO.,LTD MS-7302 [1.0] This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... Success! (driver `k8temp') AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... No Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found `Fintek F71882FG/F71883FG Super IO Sensors' Success! (address 0x600, driver `f71882fg') Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): y Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus Module i2c-dev loaded successfully. Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0) Do you want to scan it? (yes/NO/selectively): y Client found at address 0x28 Probing for `National Semiconductor LM78'... No Probing for `National Semiconductor LM79'... No Probing for `National Semiconductor LM80'... No Probing for `National Semiconductor LM96080'... No Probing for `Winbond W83781D'... No Probing for `Winbond W83782D'... No Probing for `Winbond W83627HF'... No Probing for `Winbond W83627EHF'... No Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No Probing for `Asus AS99127F (rev.1)'... No Probing for `Asus AS99127F (rev.2)'... No Probing for `Asus ASB100 Bach'... No Probing for `Analog Devices ADM1029'... No Probing for `ITE IT8712F'... No Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: SMBus PIIX4 adapter at 0b20 (i2c-1) Do you want to scan it? (yes/NO/selectively): y Client found at address 0x4f Probing for `National Semiconductor LM75'... No Probing for `National Semiconductor LM75A'... No Probing for `Dallas Semiconductor DS75'... No Probing for `Dallas Semiconductor DS1621/DS1631'... No Probing for `Maxim MAX6642'... No Probing for `Texas Instruments TMP421'... No Probing for `Texas Instruments TMP422'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Probing for `NXP/Philips SA56004'... No Next adapter: NVIDIA i2c adapter 0 at 1:00.0 (i2c-2) Do you want to scan it? (YES/no/selectively): y Client found at address 0x49 Probing for `National Semiconductor LM75'... No Probing for `National Semiconductor LM75A'... No Probing for `Dallas Semiconductor DS75'... No Probing for `National Semiconductor LM77'... No Probing for `Analog Devices ADT7410'... No Probing for `Dallas Semiconductor DS1621/DS1631'... No Probing for `Maxim MAX6642'... No Probing for `National Semiconductor LM73'... No Probing for `National Semiconductor LM92'... No Probing for `National Semiconductor LM76'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Probing for `NXP/Philips SA56004'... No Probing for `SMSC EMC1023'... No Probing for `SMSC EMC1043'... No Probing for `SMSC EMC1053'... No Probing for `SMSC EMC1063'... No Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-3) Do you want to scan it? (YES/no/selectively): y Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-4) Do you want to scan it? (YES/no/selectively): y Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `k8temp': * Chip `AMD K8 thermal sensors' (confidence: 9) Driver `f71882fg': * ISA bus, address 0x600 Chip `Fintek F71882FG/F71883FG Super IO Sensors' (confidence: 9) Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): y Copy prog/init/lm_sensors.service to /lib/systemd/system and run 'systemctl enable lm_sensors.service' for initialization at boot time. Unloading i2c-dev... OK Unloading cpuid... OK