* [Comm] Обозначение портов USB в АЛТ6.0 @ 2011-10-22 7:19 Олег Потеев 2011-10-22 7:30 ` Michael Shigorin 0 siblings, 1 reply; 12+ messages in thread From: Олег Потеев @ 2011-10-22 7:19 UTC (permalink / raw) To: community Установлен АЛТ 6.0 Смотрю в каталоге /dev.. Как обозначаются порты USB? В предыдущих было /dev/ttyUSB ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 7:19 [Comm] Обозначение портов USB в АЛТ6.0 Олег Потеев @ 2011-10-22 7:30 ` Michael Shigorin 2011-10-22 7:48 ` Олег Потеев 0 siblings, 1 reply; 12+ messages in thread From: Michael Shigorin @ 2011-10-22 7:30 UTC (permalink / raw) To: community On Sat, Oct 22, 2011 at 10:19:50AM +0300, Олег Потеев wrote: > Установлен АЛТ 6.0 > Смотрю в каталоге /dev.. > Как обозначаются порты USB? Никак. :) (в /dev/bus/usb и то устройства живут, см. вывод lsusb из usbutils) > В предыдущих было /dev/ttyUSB Это один из вариантов USB Serial -- также может оказаться /dev/ttyACM, а вообще см. dmesg | tail после включения такого устройства. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 7:30 ` Michael Shigorin @ 2011-10-22 7:48 ` Олег Потеев 2011-10-22 9:05 ` Sergey 0 siblings, 1 reply; 12+ messages in thread From: Олег Потеев @ 2011-10-22 7:48 UTC (permalink / raw) To: community В сообщении от 22 октября 2011 10:30:53 автор Michael Shigorin написал: > On Sat, Oct 22, 2011 at 10:19:50AM +0300, Олег Потеев wrote: > > Установлен АЛТ 6.0 > > Смотрю в каталоге /dev.. > > Как обозначаются порты USB? > > Никак. :) > > (в /dev/bus/usb и то устройства живут, см. вывод lsusb из usbutils) > > > В предыдущих было /dev/ttyUSB > > Это один из вариантов USB Serial -- также может оказаться > /dev/ttyACM, а вообще см. dmesg | tail после включения такого > устройства. Хочу подключить Палм, но там в настройках надо указать, например - /dev/ttyUSB0 Как лучше, в таком случае поступить? :( ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 7:48 ` Олег Потеев @ 2011-10-22 9:05 ` Sergey 2011-10-22 10:28 ` Олег Потеев 0 siblings, 1 reply; 12+ messages in thread From: Sergey @ 2011-10-22 9:05 UTC (permalink / raw) To: ALT Linux Community general discussions On Saturday 22 October 2011, Олег Потеев wrote: > > Это один из вариантов USB Serial -- также может оказаться > > /dev/ttyACM, а вообще см. dmesg | tail после включения такого > > устройства. > Хочу подключить Палм, но там в настройках надо указать, например - > /dev/ttyUSB0 Нет, там надо указать виртуальный RS-232. Да, это, чаще, ttyUSB, но, как заметил уже Михаил, может получиться и что-то иное. Или ttyUSB где-то жёстко забито, а получается другое имя ? Тогда символьную ссылку в можно сделать, например. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 9:05 ` Sergey @ 2011-10-22 10:28 ` Олег Потеев 2011-10-22 12:10 ` Sergey 0 siblings, 1 reply; 12+ messages in thread From: Олег Потеев @ 2011-10-22 10:28 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от 22 октября 2011 12:05:24 автор Sergey написал: > On Saturday 22 October 2011, Олег Потеев wrote: > > > Это один из вариантов USB Serial -- также может оказаться > > > /dev/ttyACM, а вообще см. dmesg | tail после включения такого > > > устройства. > > > > Хочу подключить Палм, но там в настройках надо указать, например - > > /dev/ttyUSB0 > > Нет, там надо указать виртуальный RS-232. Да, это, чаще, ttyUSB, > но, как заметил уже Михаил, может получиться и что-то иное. > Или ttyUSB где-то жёстко забито, а получается другое имя ? Тогда > символьную ссылку в можно сделать, например. Символьную ссылку на что? --> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 10:28 ` Олег Потеев @ 2011-10-22 12:10 ` Sergey 2011-10-22 15:50 ` Олег Потеев 0 siblings, 1 reply; 12+ messages in thread From: Sergey @ 2011-10-22 12:10 UTC (permalink / raw) To: ALT Linux Community general discussions On Saturday 22 October 2011, Олег Потеев wrote: > > Нет, там надо указать виртуальный RS-232. Да, это, чаще, ttyUSB, > > но, как заметил уже Михаил, может получиться и что-то иное. > > Или ttyUSB где-то жёстко забито, а получается другое имя ? Тогда > > символьную ссылку в можно сделать, например. > Символьную ссылку на что? --> На то, про что Михаил написал: "а вообще см. dmesg | tail после включения такого устройства". Вот там и смотреть, какое именно устройство появится. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 12:10 ` Sergey @ 2011-10-22 15:50 ` Олег Потеев 2011-10-22 19:03 ` Sergey 2011-10-23 8:30 ` Maksym Tiurin 0 siblings, 2 replies; 12+ messages in thread From: Олег Потеев @ 2011-10-22 15:50 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от 22 октября 2011 15:10:42 автор Sergey написал: > On Saturday 22 October 2011, Олег Потеев wrote: > > > Нет, там надо указать виртуальный RS-232. Да, это, чаще, ttyUSB, > > > но, как заметил уже Михаил, может получиться и что-то иное. > > > Или ttyUSB где-то жёстко забито, а получается другое имя ? Тогда > > > символьную ссылку в можно сделать, например. > > > > Символьную ссылку на что? --> > > На то, про что Михаил написал: "а вообще см. dmesg | tail после > включения такого устройства". Вот там и смотреть, какое именно > устройство появится. $ dmesg | tail [ 9824.177427] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1 [ 9824.177472] visor 2-2:1.0: device disconnected [ 9827.096514] usb 2-2: new full speed USB device number 3 using uhci_hcd [ 9840.240214] hub 2-0:1.0: unable to enumerate USB device on port 2 [39008.096548] ata1.00: configured for UDMA/133 [39008.096564] ata1: EH complete [39009.123362] EXT4-fs (sda1): re-mounted. Opts: commit=0 [39015.364617] ata1.00: configured for UDMA/133 [39015.364634] ata1: EH complete [39015.830093] EXT4-fs (sda1): re-mounted. Opts: commit=0 Палм подключил, но как видно, он не подключен. Или я чего не понимаю? :( ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 15:50 ` Олег Потеев @ 2011-10-22 19:03 ` Sergey 2011-10-23 8:30 ` Maksym Tiurin 1 sibling, 0 replies; 12+ messages in thread From: Sergey @ 2011-10-22 19:03 UTC (permalink / raw) To: ALT Linux Community general discussions On Saturday 22 October 2011, Олег Потеев wrote: > > На то, про что Михаил написал: "а вообще см. dmesg | tail после > > включения такого устройства". Вот там и смотреть, какое именно > > устройство появится. > $ dmesg | tail > [ 9824.177427] visor ttyUSB1: Handspring Visor / Palm OS converter now > disconnected from ttyUSB1 > Палм подключил, но как видно, он не подключен. Или я чего не понимаю? :( Ну так вот же. Только это момент отсоединения, так как "disconnected from". Или это при присоединённом устройстве происходит ? Если при присоединённом, то надо думать, почему он отсоединяется. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-22 15:50 ` Олег Потеев 2011-10-22 19:03 ` Sergey @ 2011-10-23 8:30 ` Maksym Tiurin 2011-10-23 15:26 ` Олег Потеев 1 sibling, 1 reply; 12+ messages in thread From: Maksym Tiurin @ 2011-10-23 8:30 UTC (permalink / raw) To: ALT Linux Community general discussions 10/22/11 18:50, Олег Потеев пишет: > В сообщении от 22 октября 2011 15:10:42 автор Sergey написал: > >> On Saturday 22 October 2011, Олег Потеев wrote: >> >>>> Нет, там надо указать виртуальный RS-232. Да, это, чаще, ttyUSB, >>>> но, как заметил уже Михаил, может получиться и что-то иное. >>>> Или ttyUSB где-то жёстко забито, а получается другое имя ? Тогда >>>> символьную ссылку в можно сделать, например. >>>> >>> Символьную ссылку на что? --> >>> >> На то, про что Михаил написал: "а вообще см. dmesg | tail после >> включения такого устройства". Вот там и смотреть, какое именно >> устройство появится. >> > $ dmesg | tail > [ 9824.177427] visor ttyUSB1: Handspring Visor / Palm OS converter now > disconnected from ttyUSB1 > [ 9824.177472] visor 2-2:1.0: device disconnected > [ 9827.096514] usb 2-2: new full speed USB device number 3 using uhci_hcd > [ 9840.240214] hub 2-0:1.0: unable to enumerate USB device on port 2 > [39008.096548] ata1.00: configured for UDMA/133 > [39008.096564] ata1: EH complete > [39009.123362] EXT4-fs (sda1): re-mounted. Opts: commit=0 > [39015.364617] ata1.00: configured for UDMA/133 > [39015.364634] ata1: EH complete > [39015.830093] EXT4-fs (sda1): re-mounted. Opts: commit=0 > Палм подключил, но как видно, он не подключен. Или я чего не понимаю? :( > Устройство появляется только во время синхронизации. Ткни HotSync - появятся девайсы. -- With Best Regards, Maksym Tiurin JID: MrKooll@jabber.pibhe.com ___ / _ )__ _____ ___ ____ _______ _____ / _ / // / _ \/ _ `/ _ `/ __/ // (_-< /____/\_,_/_//_/\_, /\_,_/_/ \_,_/___/ /___/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-23 8:30 ` Maksym Tiurin @ 2011-10-23 15:26 ` Олег Потеев 2011-10-23 17:03 ` Sergey 0 siblings, 1 reply; 12+ messages in thread From: Олег Потеев @ 2011-10-23 15:26 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от 23 октября 2011 11:30:00 автор Maksym Tiurin написал: > 10/22/11 18:50, Олег Потеев пишет: > > В сообщении от 22 октября 2011 15:10:42 автор Sergey написал: > >> On Saturday 22 October 2011, Олег Потеев wrote: > >>>> Нет, там надо указать виртуальный RS-232. Да, это, чаще, ttyUSB, > >>>> но, как заметил уже Михаил, может получиться и что-то иное. > >>>> Или ttyUSB где-то жёстко забито, а получается другое имя ? Тогда > >>>> символьную ссылку в можно сделать, например. > >>> > >>> Символьную ссылку на что? --> > >> > >> На то, про что Михаил написал: "а вообще см. dmesg | tail после > >> включения такого устройства". Вот там и смотреть, какое именно > >> устройство появится. Не пойму. Ставил /dev/ttyUSB0, ничего не получалось. Делал и так и эдак. Все порты перепробовал. Сейчас всё вернул на 0 порт, всё пошло! Большое спасибо всем, кто откликнулся. Теперь, по крайней мере, буду знать, куда смотреть. Тема закрыта. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-23 15:26 ` Олег Потеев @ 2011-10-23 17:03 ` Sergey 2011-10-23 18:18 ` Олег Потеев 0 siblings, 1 reply; 12+ messages in thread From: Sergey @ 2011-10-23 17:03 UTC (permalink / raw) To: ALT Linux Community general discussions On Sunday 23 October 2011, Олег Потеев wrote: > Не пойму. > Ставил /dev/ttyUSB0, ничего не получалось. Почему "0" ?? Там же было написано "1": "visor ttyUSB1:". Видимо, имя /dev/ttyUSB0 было занято чем-то другим. Может быть, даже просто не освободилось после попытки предыдущего подключения. -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Обозначение портов USB в АЛТ6.0 2011-10-23 17:03 ` Sergey @ 2011-10-23 18:18 ` Олег Потеев 0 siblings, 0 replies; 12+ messages in thread From: Олег Потеев @ 2011-10-23 18:18 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от 23 октября 2011 20:03:00 автор Sergey написал: > On Sunday 23 October 2011, Олег Потеев wrote: > > Не пойму. > > Ставил /dev/ttyUSB0, ничего не получалось. > > Почему "0" ?? Там же было написано "1": "visor ttyUSB1:". Видимо, имя > /dev/ttyUSB0 было занято чем-то другим. Может быть, даже просто не > освободилось после попытки предыдущего подключения. В конференцию я отправил тот вариант подключения, когда подключал через ЮСБ1 :( ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2011-10-23 18:18 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-10-22 7:19 [Comm] Обозначение портов USB в АЛТ6.0 Олег Потеев 2011-10-22 7:30 ` Michael Shigorin 2011-10-22 7:48 ` Олег Потеев 2011-10-22 9:05 ` Sergey 2011-10-22 10:28 ` Олег Потеев 2011-10-22 12:10 ` Sergey 2011-10-22 15:50 ` Олег Потеев 2011-10-22 19:03 ` Sergey 2011-10-23 8:30 ` Maksym Tiurin 2011-10-23 15:26 ` Олег Потеев 2011-10-23 17:03 ` Sergey 2011-10-23 18:18 ` Олег Потеев
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git