* Re: [Comm] опять принтера CANON @ 2010-02-09 12:32 ` Arcady V. Ivanov 2010-02-09 12:38 ` Денис Назаров 2010-02-10 18:29 ` Michael Shigorin 0 siblings, 2 replies; 7+ messages in thread From: Arcady V. Ivanov @ 2010-02-09 12:32 UTC (permalink / raw) To: Денис Назаров, ALT Linux Community general discussions ----- "Денис Назаров" <marsden@mail.ru> пишет: > -----Original Message----- > From: "Arcady V. Ivanov" <arc@ikir.ru> > To: Денис Назаров <marsden@mail.ru>, > ALT Linux Community general discussions <community@lists.altlinux.org> > Date: Tue, 9 Feb 2010 23:25:29 +1200 (PETT) > Subject: Re: [Comm] опять принтера CANON > > > > > ----- "Денис Назаров" <marsden@mail.ru> пишет: > > > > > Здравствуйте! > > > > > > Имеется CANON i-Sensys LBP3010 > > > .... > > > > modprobe usblp > > > > И в /etc/modules не забудьте вставить. > > сделал. Сразу апплет принтера появился, радостно доложил, что нашел аж > тройной принтер LBP3010-LBP3018-LBP3050 и ни в какую не хочет печатать > дальше... Снес все, попытался сделать все заново - и опять ничего не > вышло... > > потом глянул lpinfo -l -v. Без usblp там такое > > Device: uri = usb://Canon/LBP3010/LBP3018/LBP3050?serial=0000B299F2jb > > если же сделать modprobe usblp, то эта строчка меняется на такое > > Device: uri = > hal:///org/freedesktop/Hal/devices/usb_device_4a9_26da_0000B299F2jb_if0_printer_noserial Выкиньте hal для принтеров. Он всё равно для Canon ставит что-то нерабочее. > > > > > > А ccpd сегфолтится когда захочет. > > > > > Я уже всех сотрудников предупредил, кто сдуру купит принтер > > от Canon - будет много раз расстрелян. > > а куда деваться? Запустить надо :( Выкиньте. Себе и юзеру дороже. Я весь зверинец LBP попробовал, 810,1120,2900,... И на 4.1 и на 5.0. Да. Иногда работает. Когда ccpd сегфолтится, надо зачастую питание принтеру выключать, + полный скрипт, убивающий всё от Canon, + перезапуск всех демонов, относящихся к печати. Надёжность этих дров от Canon пятилетней давности = 0. Забавно то, что на версии xx.30 работает стабильнее, чем на xx.80. Но достаточно бумажку не вложить в принтер - и уже проблемы. Точно выкиньте. -- С уважением. Гл. специалист по ИТ ИКИР ДВО РАН. Аркадий Иванов. Sincerely yours. My site http://www.arccomm.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] опять принтера CANON 2010-02-09 12:32 ` [Comm] опять принтера CANON Arcady V. Ivanov @ 2010-02-09 12:38 ` Денис Назаров 2010-02-09 14:01 ` Денис Назаров 2010-02-10 18:29 ` Michael Shigorin 1 sibling, 1 reply; 7+ messages in thread From: Денис Назаров @ 2010-02-09 12:38 UTC (permalink / raw) To: ALT Linux Community general discussions -----Original Message----- From: "Arcady V. Ivanov" <arc@ikir.ru> >> Device: uri = >> hal:///org/freedesktop/Hal/devices/usb_device_4a9_26da_0000B299F2jb_if0_printer_noserial > Выкиньте hal для принтеров. Он всё равно для Canon ставит что-то нерабочее. Каким образом это сделать? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] опять принтера CANON 2010-02-09 12:38 ` Денис Назаров @ 2010-02-09 14:01 ` Денис Назаров 2010-02-10 18:48 ` Michael Shigorin 0 siblings, 1 reply; 7+ messages in thread From: Денис Назаров @ 2010-02-09 14:01 UTC (permalink / raw) To: ALT Linux Community general discussions -----Original Message----- From: Денис Назаров <marsden@mail.ru> To: ALT Linux Community general discussions <community@lists.altlinux.org> Date: Tue, 09 Feb 2010 15:38:56 +0300 Subject: Re: [Comm] опять принтера CANON > > -----Original Message----- > From: "Arcady V. Ivanov" <arc@ikir.ru> > > >> Device: uri = > >> hal:///org/freedesktop/Hal/devices/usb_device_4a9_26da_0000B299F2jb_if0_printer_noserial > > > Выкиньте hal для принтеров. Он всё равно для Canon ставит что-то нерабочее. > > Каким образом это сделать? снес hal-cups-utils, нашел на lor инструкцию, в которой есть пара моментов, не описанных на everest, а именно - chmod 777 /var/ccpd/fifo0 и chmod 777 /dev/usb/lp0, перегрузил комп и принтер начал печатать. Проблема сегфолта ccpd при отсутствии бумаги не проявилась, пока все работает нормально. Всем спасибо, проблема решена ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] опять принтера CANON 2010-02-09 14:01 ` Денис Назаров @ 2010-02-10 18:48 ` Michael Shigorin 2010-02-10 19:08 ` Denis Nazarov 2010-02-10 19:34 ` Denis Nazarov 0 siblings, 2 replies; 7+ messages in thread From: Michael Shigorin @ 2010-02-10 18:48 UTC (permalink / raw) To: ALT Linux Community general discussions On Tue, Feb 09, 2010 at 05:01:31PM +0300, Денис Назаров wrote: > > >> Device: uri = > > >> hal:///org/freedesktop/Hal/devices/usb_device_4a9_26da_0000B299F2jb_if0_printer_noserial > > > Выкиньте hal для принтеров. Он всё равно для Canon ставит что-то нерабочее. > > Каким образом это сделать? > снес hal-cups-utils, нашел на lor инструкцию, в которой есть > пара моментов, не описанных на everest, а именно - chmod 777 > /var/ccpd/fifo0 и chmod 777 /dev/usb/lp0, перегрузил комп и > принтер начал печатать. Проблема сегфолта ccpd при отсутствии > бумаги не проявилась, пока все работает нормально. Всем > спасибо, проблема решена Стоит зафиксировать по свежим следам: http://www.freesource.info/wiki/HCL/Periferija/Printery/Canon -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] опять принтера CANON 2010-02-10 18:48 ` Michael Shigorin @ 2010-02-10 19:08 ` Denis Nazarov 2010-02-10 19:34 ` Denis Nazarov 1 sibling, 0 replies; 7+ messages in thread From: Denis Nazarov @ 2010-02-10 19:08 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Среда 10 февраля 2010 23:48:33 автор Michael Shigorin написал: > On Tue, Feb 09, 2010 at 05:01:31PM +0300, Денис Назаров wrote: > > > >> Device: uri = > > > >> hal:///org/freedesktop/Hal/devices/usb_device_4a9_26da_0000B299F2jb_ > > > >>if0_printer_noserial > > > > > > > > Выкиньте hal для принтеров. Он всё равно для Canon ставит что-то > > > > нерабочее. > > > > > > Каким образом это сделать? > > > > снес hal-cups-utils, нашел на lor инструкцию, в которой есть > > пара моментов, не описанных на everest, а именно - chmod 777 > > /var/ccpd/fifo0 и chmod 777 /dev/usb/lp0, перегрузил комп и > > принтер начал печатать. Проблема сегфолта ccpd при отсутствии > > бумаги не проявилась, пока все работает нормально. Всем > > спасибо, проблема решена > > Стоит зафиксировать по свежим следам: > http://www.freesource.info/wiki/HCL/Periferija/Printery/Canon > а этот сайт разве не собирались замораживать? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] опять принтера CANON 2010-02-10 18:48 ` Michael Shigorin 2010-02-10 19:08 ` Denis Nazarov @ 2010-02-10 19:34 ` Denis Nazarov 1 sibling, 0 replies; 7+ messages in thread From: Denis Nazarov @ 2010-02-10 19:34 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Среда 10 февраля 2010 23:48:33 автор Michael Shigorin написал: > Стоит зафиксировать по свежим следам: > http://www.freesource.info/wiki/HCL/Periferija/Printery/Canon > Зафиксировал http://freesource.info/wiki/HCL/Periferija/Printery/Canon?v=owz#h1615-8 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] опять принтера CANON 2010-02-09 12:32 ` [Comm] опять принтера CANON Arcady V. Ivanov 2010-02-09 12:38 ` Денис Назаров @ 2010-02-10 18:29 ` Michael Shigorin 1 sibling, 0 replies; 7+ messages in thread From: Michael Shigorin @ 2010-02-10 18:29 UTC (permalink / raw) To: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 1920 bytes --] On Wed, Feb 10, 2010 at 12:32:37AM +1200, Arcady V. Ivanov wrote: > > > А ccpd сегфолтится когда захочет. Я уже всех сотрудников > > > предупредил, кто сдуру купит принтер от Canon - будет много > > > раз расстрелян. > > а куда деваться? Запустить надо :( У нас как-то заказчик их набрать молча успел, когда HP сдуру пристрелили LJ1320... > Выкиньте. Себе и юзеру дороже. Я весь зверинец LBP попробовал, > 810,1120,2900,... И на 4.1 и на 5.0. > Да. Иногда работает. Когда ccpd сегфолтится, надо зачастую > питание принтеру выключать, + полный скрипт, убивающий всё от > Canon, + перезапуск всех демонов, относящихся к печати. > Надёжность этих дров от Canon пятилетней давности = 0. > Забавно то, что на версии xx.30 работает стабильнее, чем на xx.80. > Но достаточно бумажку не вложить в принтер - и уже проблемы. Да, мы тоже остановились на cndrvcups-capt-1.30-1 (ещё смотрели на 1.50). С бумагой проблем не припомню (в отличие от capt). > Точно выкиньте. Прилагаю стопку скриптиков в пользу тех, кому с этим делом воевать. Суппорт оказать не смогу, дело было довольно давно. Выдрано из заказчикоспецифичного пакета, поэтому опять же -- если кому промышленно сражаться, можете попробовать свернуть в кучку, заодно на freesource.info либо altlinux.org описать. *-setup и *-setup-ui -- это хелперы и gxmessage-интерфейсы к ним, предполагающие точечную настройку беспарольного sudo на хелперы. Архив доступен здесь: http://fly.osdn.org.ua/~mike/works/misc/ccpd-scripts.tar.gz Также пушнул lprestart -- скрипт с suid-обёрткой, предназначенный для передёргивания принтера пользователем ПК, к которому он подключен (при более близком знакомстве с ccpd возникали мысли насчёт lprestart.d/, куда бы можно было укладывать драйвероспецифичные костыли): http://git.altlinux.org/people/mike/packages/?p=lprestart.git -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ [-- Attachment #2: ccpd-scripts.tar.gz --] [-- Type: application/x-gzip, Size: 2580 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-02-10 19:34 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-02-09 12:32 ` [Comm] опять принтера CANON Arcady V. Ivanov 2010-02-09 12:38 ` Денис Назаров 2010-02-09 14:01 ` Денис Назаров 2010-02-10 18:48 ` Michael Shigorin 2010-02-10 19:08 ` Denis Nazarov 2010-02-10 19:34 ` Denis Nazarov 2010-02-10 18:29 ` Michael Shigorin
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git